Description

Wide Range of Applications.It can be in Various Area, such as Stage lighting, Textile Machinery, 3D Printer and 14 inches Wire 40cm , one connect electrical machine, on the other end has Variety Optional Ports; Heat Shrink Tubing Effect to Prevent the Wire Tangled up.

Featues

- Bipolar Nema 17 Stepper Motor with high torque.low Self-inductance Reactance, Responsive and can Avoid System Error.
- Each Phase Draws Current 0.7A at 12V 24V, Allowing for a Holding Torque of 13Ncm(18.4oz.in).With 1.8° step angle (200 steps/revolution).
- Connection: Red(A ), Green(A-), Yellow(B ), Blue(B-),The cable length is 400mm euqal to 15.7 inches.
- Wide Range of Applications.It can be in Various Area, such as Stage lighting, Textile Machinery, 3D Printer and 14 inches Wire 40cm , one connect electrical machine, on the other end has Variety Optional Ports; Heat Shrink Tubing Effect to Prevent the Wire Tangled up.
- It should be connected to a constant current or chopper driver as a stepper motor. If you connect the motor directly to a power supply, the motor is destroyed.


Electrical Specification:

- Manufacturer Part Number: TY17HS10-0704S
- Motor Type: Bipolar Stepper
- Step Angle: 1.8°
- Holding Torque: 13Ncm (18.4oz.in)
- Rated Current/phase: 0.7A
- Phase Resistance: 4.2ohms
- Recommended Voltage: 12-24V
- Inductance : 5.5mH±20%(1KHz)

Physical Specification:

- Color: As shown
- Size: 4.2x4.2x2.5cm
- Body Length: 25mm
- Shaft Diameter: 5mm
- Shaft Length: 20mm
- Number of : 4
- Length: 300mm

Connection:

Black(A+), Green(A-), Red(B+), Blue(B-)

Warning:

Make sure the motor connect to a constant current or chopper drive controller before you test motor.
Connecting the motor directly to a power supply will destroy the motor.
stepper motors

1 x Stepper Motor

Bipolar Nema 17 Stepper Motor with high torque.low Self-inductance Reactance, Responsive and can Avoid System Error. |Each Phase Draws Current 0.7A at 12V 24V, Allowing for a Holding Torque of 13Ncm(18.4oz.in).With 1.8° step angle (200 steps/revolution). |Connection: Red(A ), Green(A-), Yellow(B ), Blue(B-),The cable length is 400mm euqal to 15.7 inches. |Wide Range of Applications.It can be in Various Area, such as Stage lighting, Textile Machinery, 3D Printer and 14 inches Wire 40cm , one connect electrical machine, on the other end has Variety Optional Ports; Heat Shrink Tubing Effect to Prevent the Wire Tangled up. |It should be connected to a constant current or chopper driver as a stepper motor. If you connect the motor directly to a power supply, the motor is destroyed.