Description
RS485-LoRa-M Wireless Serial Transceiver RS485 To LoRa Converter 433MHz Telemetry Radio SX1268 Chip
Description:
RS485-LoRa-M module is referred to as LoRa module. It supports relay. It provides RS485 transparent data interface, which can adapt to most standard or non-standard user protocols.
In the data transmission state, transparent data transmission is performed. In this state, the LoRa module sends the device data received from the RS485 serial port directly from the air; the data received from the air is directly sent to the device from the RS485 serial port.
The working frequency band of RS485-LoRa-M is 410-525MHz. It is a LoRa module for half-duplex communication and supports data forwarding when used as a relay. The serial port only supports RS485 signals.
Features:
- Industrial-grade wireless transparent transmission module
- Small size, high sensitivity, and low power consumption
- Support RS485 signal
- SX1268 chip solution
- Point-to-point, single-point-to-multipoint communication
- Support remote configuration parameter mode. This function can modify the parameters of the radio remotely, which greatly reduces the cost of installation and commissioning and maintenance
- Support multi-level relay networking to increase wireless communication distance
- Pair communication, easy pairing, easy to use
- Support multiple serial port baud rates
- The communication process can be encrypted to ensure the security of data transmission
- Support firmware upgrade
- LoRa spread spectrum, strong anti-interference ability. The transmission distance and penetration ability are improved several times than traditional communication
- High sensitivity. Adopt high receiving sensitivity (RSSI) and strong SNR optimization with strong anti-jamming technology
Application Scenarios:
The module is suitable for most scenarios that use RS485 serial communication, such as PLC, industrial manufacturing, instrumentation, wireless meter reading, smart agriculture, industrial remote control, telemetry, automated data acquisition systems, building automation, security, and computer room equipment wireless monitoring, etc.
Basic Parameters:
- Chip solution: SX1268 (cannot be used with SX1278 module)
- Working frequency band: 410-525Mhz. Support IS M band, default 433Mhz. Channel spacing 2Mhz is appropriate
- Transmission mode: half-duplex, transparent transmission
- Transmit power: Maximum transmit power 22dbm (default). Generally set to the maximum by default
- Serial port parameters: serial port baud rate 1200-115200, 14 serial communication formats
- Working voltage: DC9-28V, 12V or 24V is recommended. Power is supplied through the terminals. Power supply reverse connection protection
- Communication distance: 3000m/9842.5ft in clear and open air (air baud rate 1200). Installation height: 2m/6.6ft above the ground
- Working environment: working temperature -40 to +85â; storage temperature -40 to +125â
- Antenna interface: RF-SMA sucker antenna, characteristic impedance 50Ω
- Dimensions: 80 x 30 x 50mm/3.1 x 1.2 x 2" (L*W*H)
Package Included:
- 1 x LORA Module With 3M/9.8FT Antenna
Note:
- At least two LORA modules are required to use.
- For more technical parameters, please contact us. Thank you!
Description:
RS485-LoRa-M module is referred to as LoRa module. It supports relay. It provides RS485 transparent data interface, which can adapt to most standard or non-standard user protocols.
In the data transmission state, transparent data transmission is performed. In this state, the LoRa module sends the device data received from the RS485 serial port directly from the air; the data received from the air is directly sent to the device from the RS485 serial port.
The working frequency band of RS485-LoRa-M is 410-525MHz. It is a LoRa module for half-duplex communication and supports data forwarding when used as a relay. The serial port only supports RS485 signals.
Features:
- Industrial-grade wireless transparent transmission module
- Small size, high sensitivity, and low power consumption
- Support RS485 signal
- SX1268 chip solution
- Point-to-point, single-point-to-multipoint communication
- Support remote configuration parameter mode. This function can modify the parameters of the radio remotely, which greatly reduces the cost of installation and commissioning and maintenance
- Support multi-level relay networking to increase wireless communication distance
- Pair communication, easy pairing, easy to use
- Support multiple serial port baud rates
- The communication process can be encrypted to ensure the security of data transmission
- Support firmware upgrade
- LoRa spread spectrum, strong anti-interference ability. The transmission distance and penetration ability are improved several times than traditional communication
- High sensitivity. Adopt high receiving sensitivity (RSSI) and strong SNR optimization with strong anti-jamming technology
Application Scenarios:
The module is suitable for most scenarios that use RS485 serial communication, such as PLC, industrial manufacturing, instrumentation, wireless meter reading, smart agriculture, industrial remote control, telemetry, automated data acquisition systems, building automation, security, and computer room equipment wireless monitoring, etc.
Basic Parameters:
- Chip solution: SX1268 (cannot be used with SX1278 module)
- Working frequency band: 410-525Mhz. Support IS M band, default 433Mhz. Channel spacing 2Mhz is appropriate
- Transmission mode: half-duplex, transparent transmission
- Transmit power: Maximum transmit power 22dbm (default). Generally set to the maximum by default
- Serial port parameters: serial port baud rate 1200-115200, 14 serial communication formats
- Working voltage: DC9-28V, 12V or 24V is recommended. Power is supplied through the terminals. Power supply reverse connection protection
- Communication distance: 3000m/9842.5ft in clear and open air (air baud rate 1200). Installation height: 2m/6.6ft above the ground
- Working environment: working temperature -40 to +85â; storage temperature -40 to +125â
- Antenna interface: RF-SMA sucker antenna, characteristic impedance 50Ω
- Dimensions: 80 x 30 x 50mm/3.1 x 1.2 x 2" (L*W*H)
Package Included:
- 1 x LORA Module With 3M/9.8FT Antenna
Note:
- At least two LORA modules are required to use.
- For more technical parameters, please contact us. Thank you!
Payment Terms
1.We accept PayPal only.
2.All major credit cards are accepted through secure payment processor PayPal.
3.Payment must be received within 7 business days of auction closing.
4.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
2.All major credit cards are accepted through secure payment processor PayPal.
3.Payment must be received within 7 business days of auction closing.
4.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
Shipping Terms
- For remote regions, we will charge your extra shipping costs. Usually it cost about 35USD-50USD. We will contact you after your payment. Thanks for your understanding.
Return Terms
1. If you receive defective item, please kindly notify us within 14 days. We will guide you the returning instruction for replacement or refund.
2. If you purchased in improper condition, please NOTE that the sipping and handling fee will not be refund, all return shipping fee should paid by the buyer unless item DOA.
3. We reserve the right to refuse any returns for objective reasons.
2. If you purchased in improper condition, please NOTE that the sipping and handling fee will not be refund, all return shipping fee should paid by the buyer unless item DOA.
3. We reserve the right to refuse any returns for objective reasons.
Custom Duties & Taxes
1. Import duties, taxes, and charges are not included in the item price or postage cost. These charges are the buyer's responsibility.
2. Avoiding some unnecessary trouble, please check with your country's customs office to inform us what we should declare its value before shipping.
2. Avoiding some unnecessary trouble, please check with your country's customs office to inform us what we should declare its value before shipping.
Feedback
1. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
2. If you are satisfied with the product you received, please kindly leave us a positive feedback and 5 star DSR. If there is any problem of your order, please feel free to contact us firstly, we are responsible and credible seller, will follow it for you asap.
2. If you are satisfied with the product you received, please kindly leave us a positive feedback and 5 star DSR. If there is any problem of your order, please feel free to contact us firstly, we are responsible and credible seller, will follow it for you asap.
On Dec-20-21 at 23:26:30 PST, seller added the following information: