|
|
|
|
|
|
|
|
|
Description
Using high quality aerospace aluminum;
Designed to move the wheel further out from the hub;
Gives your car a more aggressive stance & allows for better handling characteristics;
Fitment, Quality, & Durability tested;
Eliminate wheel/tire rubbing instantly;
Mount larger wheel or tires;
Increase driving stability;
Aggresive stance.No special tools required;
Extremely fast and easy;
Easy as changing a tire;
All needed is a lug wrench and jack;
Same as changing a tire.
Specifications
Please Make Sure You Take The Proper Measurements Before Purchasing:
Quantity: 4pcs or 2 pair
Thickness: Each Spacer would be 1'' Wide
Hub Bore Size: 70.5mm
Vehicle Bolt Pattern: 5x114.3mm or 5x4.5
Wheel Bolt Pattern: 5x114.3mm or 5x4.5
Thread Pitch: 1/2"x20 / 1/2" UNF
Compatibility
For Ford
Crown Victoria 1992-2011
For Ford Edge 2007-2013
For Ford Explorer 1991-2010
For Ford Fairlane 1955-1967
For Ford Falcon 1963-1970
For Ford Galaxie 500 1967-1974
For Ford Galaxie 1960-1967
For Ford Mustang 1964-1973&1979-2014
For Ford Ranger 1983-2011
For Ford Taurus 2010-2014
For Lincoln
Aviator 2003-2005
For Lincoln MKX 2007-2013
For Lincoln Town Car 1991-2011
Mercury
Cougar 1967-1973
Mercury Grand Marquis 1992-2011
Mercury Marauder 2003-2004
Mercury Mountaineer 1999-2010
What should I pay attention to during installation?
1) Check to make sure that the wheel spacer fits perfectly with the hub/axle stub and the inner mounting surface of the wheel.
2) Make sure that the wheel bolts being used are of the appropriate length, not too long or too short.
3) DO NOT proceed if both of the wheel spacer do not fit.
4) Please be sure to clean the rust on the hub before starting the installation, otherwise it will affect the working life of the spacers.
5) Make sure that you get 5-7 FULL TURNS of the lugs when installing. Torque them down to the manufacturers specs (up to and not greater than 110ft lbs).
6) Avoid using an impact wrench because improper usage may cause the lug nuts/bolts to break or loosen while driving causing a potential injury or accident.
7) All lug nuts, bolts and torque must be checked after driving the first 50 miles after installation. Afterwards, please check all lug nuts and bolts every 3,000-5,000 miles.
8) Alignment is necessary after installation, this will prevent any wobble and vibration from occurring.
How to measure the fender gap to choose suitable thickness?
1) Line up a straight edge ruler against the sidewall of the tire, use the measuring device to measure from the inside of the ruler to the inner fender lip.
2) Please take multiple measurements and use the smallest data point.(The most closest spot may be at the front or rear edge of the fender). The maximum recommended spacer
thickness= the smallest gap - 3/8"(10mm)
Item Specifics | |
---|---|
Brand | KYX |
Manufacturer Part Number | 5 lug-5x4.5-5x114.3-1/2"-CB 70.5mm |
Surface Finish | Silver |
Hub Bore Size | 70.5mm |
Bolt Pattern | 5x114.3 to 5x114.3 or 5x4.5" to 5x4.5" |
Spacer Type | Hub Centric |
Thickness | 1" |
Thread Type | 12mm x 1.25 |
Wheel Bolt Pattern | 5x4.5" (5x114.3) |
Vehicle Bolt Pattern | 5x4.5" (5x114.3) |
Warranty | 1 Year |
Fits | For Ford Mustang Edge Ranger |
Interchange Part Number | 5 lug 5x4.5/ 5x114.3 Wheel Spacers |
Thread Pitch | 1/2"x20 |
Type | Wheel Spacer |
Other Part Number | 1992 For Ford Crown Victoria 1994 2005 For Ford Ranger For MAZDA B4000 |
Superseded Part Number | 2001 2003 2004 2008 2010 For Ford Mustang For Ford Explorer Sport Trac |
Country/Region of Manufacture | America |
Manufacturer Warranty | 5 Years |
Performance Part | Yes |
Universal Fitment | No |
Brand Type | Aftermarket Branded |
Material | High Grade T6 Aluminum/10.9 Carbon steel wheel studs |
Placement on Vehicle | Front,Rear,Left,Right |
Studs | 10.9 Grade |
Shop Category Excellent Delivery |
4PC 1" 5x4.5'' 5x4.5'' Fits For Ford Mustang For Lincoln Town Car Wheel Spacers Adapters
Description
Specifications
Compatibility For Ford Crown Victoria 1992-2011
For Lincoln Aviator 2003-2005
Mercury Cougar 1967-1973
What should I pay attention to during installation?
1) Check to make sure that the wheel spacer fits perfectly with the hub/axle stub and the inner mounting surface of the wheel. 2) Make sure that the wheel bolts being used are of the appropriate length, not too long or too short. 3) DO NOT proceed if both of the wheel spacer do not fit. 4) Please be sure to clean the rust on the hub before starting the installation, otherwise it will affect the working life of the spacers. 5) Make sure that you get 5-7 FULL TURNS of the lugs when installing. Torque them down to the manufacturers specs (up to and not greater than 110ft lbs). 6) Avoid using an impact wrench because improper usage may cause the lug nuts/bolts to break or loosen while driving causing a potential injury or accident. 8) Alignment is necessary after installation, this will prevent any wobble and vibration from occurring.
How to measure the fender gap to choose suitable thickness?
1) Line up a straight edge ruler against the sidewall of the tire, use the measuring device to measure from the inside of the ruler to the inner fender lip.
Instant Paypal payment is the preferred method of payment.
We only accept payment PayPal
We will only ship to the confirmed Paypal shipping address given with the payment.
We do not offer local pickups.
We only ship the item to the Paypal Verified address that is sent to us at the time of checkout. If we ship your item to an old or invalid address and you are not able to locate the item, we are not responsible for shipping a replacement.
Currently, we do not ship to APO/FPO. PO Boxes .
We use USPS First Class Package service.
Most of our orders ship within 3 business day. 99% of our order ship within 1-2 business days.
* autostore_2020 is happy to warranty our parts for 60 Days after purchase.
* We only warranty cost of parts. Any installation or other fees are non-refundable.
* Items that have been installed or altered are non-returnable.
* If a part arrives damaged, it is our responsibility to take care of it, but it must be reported to us immediately.
Any problem, complaint or suggestion happened during transaction, please contact us before leaving any
feedback. We are committed to resolve all issues in a friendly and satisfactory manner.
We will solve your problem during working time (except weekends and public holidays). Thank you!
We are always been trying to provide best service and reliable products for every customer.
If you are satisfed with the product you recieved,please leave us positive feedback.
If you are not satisfied for any reason, please do not be quick to leave negative or neutral feedback.We will
work hard to make sure every customer 100 percent satisfied, and reslove any problem for you.
All rights reserved. |