This offer is for one Arduino / Raspberry Pi small enclosure
clam case with an OLED .96" Display Window. The printed enclosure is
approximately 4.5" wide, 4.625" deep, and 1.75" high. The
window is for the popular .96" OLED display module 12864 128x64 pixel
display. No hardware is included (screws) but may be found at the local
home improvement store.
The case is perfectly sized for your Arduino / Raspberry PI
project and the ample front panel also has a spacious area for mounting
controls such as buttons or knobs as control inputs. The enclosure allows
up to a 3.75" deep x 3.50" wide PCB perfect using using a NANO or
Atmega328P-PU.
Dimensions for the enclosure are in the pictures. The
front and back panels are .125" thick. The front panel has the
window for the OLED with the back sided specially configured to hold the
display in position and secured with silicon or similar glue. The back
panel has no holes. The enclosure material is easily drilled for further
customization with your own controls to make a professional lasting enclosure
for your project.
Other configurations such as a centered mounted window are
also available as well as wider fronts, 8.125" and 6" wide allowing
larger PCB boards and more controls even allowing multiple OLEDs. All
enclosures are 4.5" deep and 1.75" high. Some of these
enclosures stacked are shown in the pictures as well.
Enclosures are FDM printed from black PLA.
Other options are also available for custom text to meet customization needs using FDM or SLA printing techniques with better detail. There are also several color options.
The same enclosures described above are also available for
the smaller .91" 128x32 OLED as well.
No clam shell or PCB screws and silicon glue are included but
may be found at your local hardware or home improvement store. This is
for only the 4 plastic printed parts of the enclosure, top, bottom, front with
window and back.
Please contact this store before ordering this enclosure to
assure performance to your requirements or with questions about other sizes and
further customization. For customization, please include a detailed
sketch in jpg format with your message.
If you have your own enclosure and wish to cut a hole and
neatly mount the listed OLEDs listed above see our ads for the OLED bezels
which are significantly less expensive.
NOTE: The offered enclosure in this ad is custom printed and
may not be returned. As these are custom printed, allow 2-4 days for
manufacture before shipping takes place.