4pcs Oxygen O2 Sensor Upstream+ Downstream For 2011-2014 Ford F-150 V8 5.0L 6.2L

Product Description

Specification:
Condition: New And High Quality
Upstream Right:234-5113
Upstream Left:234-5076
Downstream:234-4494*2

Fitment:
For 2011 Ford F-150 (V8, 5.0L) (Lariat Limited)

For 2011 Ford F-150 (V8, 6.2L) (Lariat Limited)

For 2011-2012 Ford F-150 (V8, 5.0L) ( Edition)

For 2011-2012 Ford F-150 (V8, 6.2L) ( Edition)

For 2011-2014 Ford F-150 (V8, 5.0L) (FX2; FX4; King Ranch; Lariat; Platinum; STX; SVT Raptor; XL)

For 2011-2014 Ford F-150 (V8, 6.2L) (FX2; FX4; King Ranch; Lariat; Platinum; STX; SVT Raptor; XL)

For 2012-2014 Ford F-150 (V8, 5.0L) (XLT)

For 2012-2014 Ford F-150 (V8, 6.2L) (XLT)

Package Include:4X O2 Sensor

Note:
Please enter your vehicle's Year, Make, Model, Trim and Engine in the  Compatibility Table.
The Compatibility Is Just For Reference.Please check the picture and the  part number carefully to make sure that you bought the right part for your  car.The only way to be 100% sure that the part will fit your vehicle is to  check your original part,You can also email us your VIN # before purchase  and we will check for you and reply soon within 24 hours.


NOTE:Please check the picture and the part number carefully to make sure that you bought the right part for your car.The only way to be 100% sure that the part will fit your vehicle is to check your original part,You can also email us before purchasing, we will check for you and reply soon within 24 hours.

Q&A

Q:Why does the oxygen sensor have false alarm, after installation ?

A: The clearing of the errors can be obtained on most systems when the vehicle battery is disconnected for at least 60 seconds. The assignment of the new sensor parameters is done automatically when the errors are cleared, but in some systems a short adapting tour is required. In this case the vehicle has to be driven on the road for some 10-15 minutes, in order to have the ECU adapt itself to the new sensor.

Q: How do I know the O2 sensor is good or not ?

A: The only way to know if the O2 sensor is functioning normally is to check its responsiveness to changes in the air/fuel mixture, by Voltage Measurement or Waveform Simulation.

Q：How should I install oxygen sensor ?

A: The following is the installation instructions: Use the correct part number as listed in the application catalogue ,Do not use sensor if i has been dropped ,Remove protection cap just prior to installation;

Firstly install sensor body ensuring lead wire is not twisted or bent , Do not use impact wrench or socket type wrench to install sensor ,M18 sensors - install finger tight then 1/2-3/4 turn with a wrench (35-45Nm) ;

Then connect and route lead wire as originally installed , Do not allow lead wire to touch exhaust manifold or any other hot component ,Do not apply any substances (especially oil or grease) to connector sensor ,Do not use leaded fuels,silicone or metal based additives.

Q:When should replace the oxygen sensor?

A:Oxygen Sensor Failure Symptoms:

Reduced fuel mileage
Failed emissions testing
A check engine light
Poor drive-ability

●It normally takes :
7-10 business days for US
5-10 business days for UK, Canada, German,Australia, Spain,Poland, France,Asian countries.
14-21 business days for Middle East countries.
18-25 business days for Russia, Brazil, European countries.
24-32 business days for South American countries.
Please Note:The buyer is responsible for any applicable import duties and local taxes.
Please verify your customs duties before purchase. 
All order will have   tracking number, which will show up in your message as package sent, should keep you reassuring while you play with it. If any suspicious information is spotted, please break in and let us know! We are eager to help, otherwise it gives us an illusion of nothing going wrong. 
● Once we have received cleared full payment, your items will be dispatched in 1-2 business days. 
No worry, just make sure that day is in 30 days after item received and go to Open-A-Return. In this case, you may wonder about the return shipping cost. We, too, wonder that one. Thus the rule is while no mistake is proved to be made by the Seller in the transaction, the Buyer will be responsible for the Return Label Cost.
By the way, please forgive us refusing any return request in which the order is 31 days old or even older.
Customer Service got fired if they don't work things out with you, so knock their door at will. If any question came in mind, please felt free to contact us through Messages. We will respond in 24 hours. There shall be nothing to worry about as we have confidence to solve your issue. 
* For a presumably defective product received, this one would be a bit tricky. Please tell us where the problem occurs, and our Customer Service and Technical Department will work it through with you.  Pictures and videos can come in handy here.
* For any confusing or false description in the listing that causes a mis-purchase, please kindly remind us so we can improve our listings and continuously offer a better purchasing experience to you and to all our customers as well. Did it occur to be our mistake for the faulty transaction, we would be responsible for the return cost.
We wish you understand the pressures here, and our effort will always come to your aid.
Copyright © 2021 Dianxiaomi