Description:
100% Brand new and high quality.
Made of Marine Grade 316 Stainless Steel, very tough and
resistant to corrosion.
A special bit key to remove the screws on the back wall of
coffee machines.
The key ring moves freely and immediately applicable or can
easily be removed so that you can use a regular driver handle
for access in the tightest places.
Traditionally the screws are obvious and appear as black
"rivets". However, on many of the more recent models Jura has
hidden the screws which makes it less obvious how to disassemble
the machines. You may find this additional info helpful:
J-series, Z-series, and X5: There are two hidden security screws
behind the Jura logo in the back.
Turn the logo an eight of a turn clockwise (Z-series/X5) or
counter-clockwise (J-series) to release it and you will find the
screws.
ENA-series: These machines are secured with a locking mechanism.
There is a security screw behind the Jura logo in the back. Turn
the logo to counter-clockwise release it and you will find the
screw. Remove the screw and then push the gray plate upwards to
release the locking mechanism in the back. Likewise, there's
another oval head screw in the front that will be visible when
you pull out the tray. The locking mechanism in the front needs
to be pulled down (in contrast to the one in the rear that moves
upwards)
Fit for Jura, Capresso, Krups, Franke, AEG ,Orchestro,
Siciliana, Toscana, and all Nespresso machines
The bit will fit the proprietary oval head security screws in
the following machines:
Jura-Capresso: A1, A5, A7, A9, C5, C50, C55, C65, C70, C75, C9,
C90, D6, E5, E8, E9, E10, E25,E30, E40, E45, E50, E55, E6, E60,
E65, E70, E74, E75, E80, E85, ENA3, ENA4, ENA5, ENA7,ENA9, ENA
Micro 1, ENA Micro 5, ENA Micro 8, ENA Micro 9, ENA Micro 90,
ENA Micro Easy, F5,F50, F60, F70, F90, F7, F9, F900, Giga 5,
Giga X3, Giga X7, Giga X8, Giga X9, XF50, XF70, S50,
S55, S70, S75, S85, S90, S95, S7, S8, S9, J5, J6, J9, Z5*, Z6*,
Z7*, Z8*, Z9*, X5*, X6*, X7,X9, X30, X70, X90, X95, Ultra,
Cappuccinatore, M30, Scala, Scala Vario, Evolution, 201, 300,
401, 500, 601, 801, 2000, 3000, 4000, 5000, 6000
Capresso: C1000, C1300, C1500, C2000, C3000
AEG Cafamosa: CF 80, CF 81, CF 85, CF 90, CF95, CF 100, CF 120,
CF 200, CF 300, CF 400,CF 500
Krups: Orchestro, Siciliana, Toscana, and all Nespresso
machines.
Franke: Saphira
In short, it will fit all Jura-machines. As for other brands,
please check list above or contact us.
Please beware that the tool does not fit the 5.8x4.8mm oval head
bolts found in Krups drip coffee makers.
Colour:Silver.
Material:316 Stainless Steel.
Size:approx.6 x 61mm/ 0.24 x 2.40inch
Package List:
1 x Repair Security Tool For Coffee Machine
Note:
Please allow 1-3mm error due to manual measurement. Please make
sure you do not mind before you bid.
The real Colour of the item may be slightly different from the
pictures shown on website caused by many factors such as
brightness of your monitor and light brightness.
