eBay

JAYO guarantees 100% Neatly Wound Filaments for all filaments

except ABS, TPU and PLA Marble

Filament	Printing tempe	Print speed	Traction (KGF)	Melting point	Elongation at break	Net weight	Tolerance	Length
PLA	200-230℃	50-100mm/s	11-16	7-9g/10min (190 ℃, 2,16 kg)	4%	1.1kg/Roll	±0.02MM	330M
PLA+	210-235℃	50-100mm/s	9-12	4-8g/10min (190℃,2.16kg)	45%	1.1kg/Roll	±0.02MM	330M
PLA Meta	180-200℃	50-100mm/s	9-12	8-10g/10min (190℃,2.16kg)	35%	1.1kg/Roll	±0.02MM	330M
PETG	220-250℃	50-100mm/s	8-14	6-11g/10min (220℃,2.16kg)	210%	1.1kg/Roll	±0.02MM	320M
SILK PLA+	200-230℃	30-60mm/s	6-8	4-8g/10min (190℃,2.16kg)	200%	1kg/Roll	±0.02MM	330M
TPU	185-215℃	20-40mm/s	/	5-8g/10min (190℃,2.16kg)	600%	0.5kg/Roll	±0.02MM	165M
ABS	230-270℃	50-100mm/s	6-11	12-19g/10min (220℃,10kg)	25%	0.65kg/Roll	±0.02MM	/

About this project

【Toughened Filament】---Premium Filament has the advantages of incredible print-friendliness, optimized print quality, high purity, low shrinkage and excellent layer adhesion, meeting your needs for functional parts with higher toughness.

【Dimensional Accuracy and Consistency】 --- These tough filaments have tight tolerances. 1.75 mm diameter, dimensional accuracy +/- 0.02 mm not exaggerated; 1kg spool (2.2lbs)

【Non-Clog, Bubble-Free and Easy to Use】--- Completely dry 24 hours before packing and vacuum seal with desiccant in nylon overpouch.

【Wide Compatibility】 --- Works perfectly with all popular 1.75mm FDM 3D printers, thanks to high quality standards in manufacturing precision and a small tolerance of +/- 0.02mm.

How to store:

1.If you leave your printer idle for more than a few days, please retract the filament to protect your printer nozzle.
2.In order to extend the life of your filament, please put the unsealed filament back into the original vacuum bag and store in a cool and dry place after printing.
3.When storing your filament, please pass the loose end through the holes on the edge of the filament spool to avoid coiling, so that it will be fed properly for the next use.