Newest Wireless WIFI Radio Telemetry for APM 2.6 Pixhawk PX4, Replace Traditional 3DR Telemetry, Support Mobile Phone/ Computer
WIFI Radio Telemetry, replacing the traditional 3DR Radio Telemetry, use mobile phone, tablet, computer as the receiving end, and transfer the real flight attitude of flight controller end and related data information.
After Only need to using the Transmitter and Receiver at the same time after connected. After WIFI data transmission connected with flight control, install ground equipment, use mobile phone search WIFI. No need to distinguish 915 or 433 again, and also no need to choose the baud rate, the default is 57600. And also have one APM and one Pixhawk connecting cables for Telemetry, more convenient for users. External 2.4G soft (IPEX joints) WIFI antenna, 2DB gain (small size) brass antenna, length 10CM, user-friendly installation.
1. WIFI Radio Telemetry Basic Specifications:
Wireless Standard
IEEE 802.11n, IEEE 802.11g, IEEE 802.11b
Wireless Transmission Rate:
11n: Up to 150Mbps
11g: Up to 54Mbps
11b: Up to 11Mbps
Number of Channels: 1-14
Frequency Range: 2.4-2.4835G
Transmitter power 14-18 DBM
Interface: Serial ports, GPIO
Antenna Type: External antenna
Transmission distance: 300-800 meters (different environmental conditions, different transmission distance)
Function Specifications:
- WIFI mode
- Wireless LAN / wireless access point
- Wireless Security
- Wireless security features
- 64/128/152 bit WEP encryption
- WPA-PSK / WPA2-PSK, WPA / WPA2 security mechanism
- Transmission rate: 57600bps
- TCP connection
- Maximum number of connections: 4
Other Specifications:
- Status Indicator
- Status Indication
- Environmental Standards
- Working temperature: -20-70 degree
- Humidity: 10% -90% RH (non-condensing)
- Storage temperature: -40-80 degree
- Storage humidity: 5% -90% RH (non-condensing)
Other properties:
Bandwidths optional: 20MHz, 40MHz, automatic
2. The hardware connection Method:
3.The ground station software connection:
As shown in the back of the module: NAME: APM_PIX_WIFI
Protocol: TCP
PASSWORD: 12345678
IP: 192.168.0.99
PORT: 6789
1. Before opening the computer, please connect the flight control and WIFI Telemetry first,, and power on the flight control, power supply by USB port is unavailable.
2, Please connect the Wifi on Computer or mobile phone to the WIFI Telemetry, this instruction use the computer as a demonstration.
3. Select APM_PIX_WIFI, and click connect, enter the password: 12345678
4.The status after connected
5. Open MissionPlanner ground station software, select TCP connection, no need to select the baud rate, it will automatically switch to 57600, and click Connect.
6. In the remote host dialog box , enter the IP address: 192.168.0.99 , click OK
7. Then enter 6789 in the remote Port dialog box, click OK
8. Waiting to read flight control data, the connection is successful.
Phone connection, as shown below
