AB0119
AB0619
Condition: Tested and Reset to Factory Defaults - see pictures.
HPE Lifetime Warranty - see picture
Product Description: Includes Rack Mounts
Power lead not included (If lead is required please add $15)
Ports:
24 x 1G / 1000-Base-T
2 x 10G / 10GBase-T
Product: | HP 3800-24G-2XG Switch |
Serial number: | SG2BG0X564 / SG45G0X267 |
Product number: | J9585A |
The HP 3800 Switch Series is a family of nine fully managed Gigabit Ethernet switches available in 24-port and 48-port models, with or without PoE+, and with either SFP+ or 10GBASE-T uplinks. The 3800 Switch Series utilizes the latest HP ProVision ASIC technology and advances in hardware engineering to deliver one of the most resilient and energy-efficient switches in the industry. Meshed stacking technology is implemented in the HP 3800 Switch Series to deliver chassis-like resiliency in a flexible, stackable form factor.
Features:
More Features : Flow control, layer 2 switching, DHCP support, BOOTP support, ARP support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, DiffServ support, IPv6 support, sFlow, Rapid Spanning Tree Protocol (RSTP) support, Virtual Route Redundancy Protocol (VRRP) support, Multiple Spanning Tree Protocol (MSTP) support, Access Control List (ACL) support, Quality of Service (QoS), MLD snooping, STP Root Guard, Uni-Directional Link Detection (UDLD), fan tray, MAC address lockout
Overview
L3
Nonstop switching and routing
improves network availability to better support critical applications, such as unified communication and mobility; traffic will continue to be forwarded during failovers, when the backup member of the stack becomes the commander
IEEE 802.3ad Link Aggregation Protocol (LACP) and Hewlett Packard Enterprise port trunking
support up to 24 trunks, each with up to 8 links (ports) per trunk
IEEE 802.1s Multiple Spanning Tree
provides high link availability in multiple VLAN environments by allowing multiple spanning trees; provides legacy support for IEEE 802.1d and IEEE 802.1w
Dual hot-swappable power supplies
– Increased resiliency: provides secondary power supply to enable complete switch power redundancy in case of power line or supply failure
– Increased PoE+ power: provides the secondary power supply to increase the total available PoE+ powerDistributed trunking
enables loop-free and redundant network topology without using Spanning Tree Protocol; allows a server or switch to connect to two switches using one logical trunk for redundancy and load sharing
SmartLink
provides easy-to-configure link redundancy of active and standby links
switching
IEEE 802.1ad QinQ
increases the scalability of an Ethernet network by providing a hierarchical structure; connects multiple LANs on a high- speed campus or metro network
IEEE 802.1v protocol VLANs
isolate select non-IPv4 protocols automatically into their own VLANs
MAC-based VLAN
provides granular control and security; uses RADIUS to map a MAC address/user to specific VLANs
Rapid Per-VLAN Spanning Tree (RPVST+)
allows each VLAN to build a separate spanning tree to improve link bandwidth usage; is compatible with PVST+
Hewlett Packard Enterprise switch meshing
dynamically load balances across multiple active redundant links to increase available aggregate bandwidth; allows concurrent Layer 3 routing
GVRP and MVRP
allows automatic learning and dynamic assignment of VLANs
VLAN support and tagging
supports the IEEE 802.1Q standard and 4094 VLANs simultaneously
services
Loopback interface address
defines an address in Routing Information Protocol (RIP) and Open Standard Path First (OSPF), improving diagnostic capability
Route maps
provide more control during route redistribution; allow filtering and altering of route metrics
User Datagram Protocol (UDP) helper function
allows UDP broadcasts to be directed across router interfaces to specific IP unicast or subnet broadcast addresses; and helps prevent server spoofing for UDP services such as DHCP
DHCP server
centralizes and reduces the cost of IPv4 address management
routing
Static IP routing
provides manually configured routing for both IPv4 and IPv6 networks
30 Days Change of Mind Returns
We accept PayPal and Bank Deposit for payment.
Our Bank Details:
Account Name: | Klearview |
Bank: | ANZ |
BSB: | 012291 |
Account Number: | 494937134 |
Please use your eBay Username as payment reference (not item number).
Order will be process after payment clears.
Pickup is available with prior arrangements only. Please Contact Us before buying on eBay.