This phase sequence indicator is a cost effective meter to offer a clear indication of the phase sequence as well as showing any missing phases in the power source under test.
- Designed to show phase sequence and missing phase indication
- Large LCD display to show results
- Powered by the circuit under test
- Supplied with 3x test leads with alligator clips, carry bag and manual
- 12 month limited warranty *view Terms & Conditions for details
General Characteristics
Power : No Battery Required
Product Colour : Orange and Grey
Product Net Weight : 180g
Product Size : 70mm × 75mm × 30mm
Standard Accessories : Carrying Bag
When using electrical appliances basic safety precautions should always be
followed:
• Wear personal protective equipment to avoid electric shocks and other injuries.
• Check whether the insulators of the test leads are damaged or have any exposed
metal. Inspect the continuity of the test leads. If any test lead is damaged, replace
it.
• Be very careful if the voltage is a true RMS of 30V AC, or 42V AC as peak, or 60V
DC because these voltages are always likely to cause electric shocks.
• When using a probe, place fingers away from its contact and behind the finger
protection device.
• The impedance generated by the transient current of the extra operating circuit
connected in parallel will possibly affect the measurement adversely.
• Before measuring a dangerous voltage, such as a true RMS of 30V AC, or 42V
AC, or 60V DC, make sure that the product is operating normally.
• Do not use any part of the product if it has been dismantled.
• Do not use the indicators close to explosive gases, steam or dust.
• Do not use in a humid environment.
• There are no user-serviceable parts in this product. Refer all servicing to qualified
personnel.
• When cleaning, do not use any chemicals, abrasives or solvents that may damage
the product.