4X(Diy High Torque Quartz For Tide Controlled Clock Movement Motor Mechanism Kit
4X(Motor Size: 55x55mm/ 2.17x2.17 inch
Hour Hand Length: 45mm/1.77 inch
Minute Hand Length: 65mm/ 2.56 inch
Seconds Hand Length: 110mm/ 4.33 inch
Spindle Length: 13mm (6mm thread), Fit up to 3mm thick clock plate
Supply: 1 x AA Battery ( included)
Crystal Frequency: 32.768KHz
Average Daily Difference: ± 2 sec/day at 1.5V, 24℃
Operating Voltage: 1.25V to 1.7V
Working Temperature: -10℃ to 50℃
Circumferential Output Frequency: 0.5Hz
Second Hand Output Torque:greater or equal to 1.5gf-cm (1.5V)
Minute Hand Output Torque:greater or equal to 30gf-cm (1.5V)
Average Current Consumption: Under 160uA at 1.5v
Perfect for repai most types of clocks
Colour: Black
Material: metal + plastic
Package contents: 1* quartz watch movement motor (without battery)
1* hour hand
1* minute hand
1* second hand
1* accessory set
Only the above package content, other products are included.
e: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.)
Hour Hand Length: 45mm/1.77 inch
Minute Hand Length: 65mm/ 2.56 inch
Seconds Hand Length: 110mm/ 4.33 inch
Spindle Length: 13mm (6mm thread), Fit up to 3mm thick clock plate
Supply: 1 x AA Battery ( included)
Crystal Frequency: 32.768KHz
Average Daily Difference: ± 2 sec/day at 1.5V, 24℃
Operating Voltage: 1.25V to 1.7V
Working Temperature: -10℃ to 50℃
Circumferential Output Frequency: 0.5Hz
Second Hand Output Torque:greater or equal to 1.5gf-cm (1.5V)
Minute Hand Output Torque:greater or equal to 30gf-cm (1.5V)
Average Current Consumption: Under 160uA at 1.5v
Perfect for repai most types of clocks
Colour: Black
Material: metal + plastic
Package contents: 1* quartz watch movement motor (without battery)
1* hour hand
1* minute hand
1* second hand
1* accessory set
Only the above package content, other products are included.
e: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.)
