110V RK2670AM Withstand Voltage Tester 100VA AC 5KV Power Hi-pot Tester
Product introduction:
1. RK2670AM withstand voltage tester is an instrument for measuring withstand voltage strength, which can intuitively, accurately and quickly test the breakdown voltage, leakage current and other electrical safety performance indicators of various tested objects, and can be used as a high-voltage source for testing Components and machine performance.
2. This series of testers comply with the following standards: household appliances standards (IEC6035, GB4706.1-2001, GB4793.1-2007), lighting standards (IEC60598-1-1999, GB7000.1-2000), information standards (GB8898-2001, GB12113.GB4943-2001, IEC60065, IEC60950) and so on.
Application areas:
1. Components: Diodes, Triodes, High-voltage silicon stacks, Various electronic transformers, Connectors, High-voltage electrical appliances
2. Household appliances: TVs, Refrigerators, Air conditioners, Washing machines, Dehumidifiers, Electric blankets, Chargers, etc.
3. Insulation materials: Heat shrinkable tubing, Capacitor film, High-voltage casing, Insulating paper, Insulating shoes, Insulating rubber gloves, PCB circuit boards, etc.
4. Instrumentation: Oscilloscope, Signal generator, DC power supply, Switching power supply and other complete machines
5. Lighting appliances: Ballasts, Road lights, Stage lights, Portable lights and other lamps
6. Electric heating appliances: Electric drills, Pistol drills, Gas cutters, Grinders, Grinders, Electric welders, etc.
7. Wires and cables: High-voltage wires, Shut-off cables, Cables, Silicon rubber cables, etc.
Performance characteristics:
1. Single AC 5KV universal withstand voltage tester
2. The output voltage is adjusted by a voltage regulator, which has the characteristics of high reliability and high durability
3. The high-brightness LED digital tube displays the test time, voltage, current, and can display the breakdown current value and voltage value in real time
4. The alarm current value can be preset continuously and arbitrarily
5. The test time is displayed by a three-digit digital tube
6. Equipped with signal input and output interfaces required by PLC, it can easily form a comprehensive test system with PLC
Voltage withstand test instruments are for general- purpose HV test operation. It can be widely used for voltage withstand test in electrician’s assistant instrument, rubber-wooden facility, voltage convertor, wires , power meter, motor, power supply plug, cables and all kinds of electronic and electric products. As the launch of the national security standard,voltage withstand instrument has become one of necessary withstand test instruments to the radio and electronic products manufacturer.
Specifications：
Model: RK2670AM
Test Voltage (AC):0~5KV +/-5%
Leakage Current (AC): 0~2/20mA +/-5%
Timing (s): 0~99s; Manual control
Pmax: 100VA
Converter Volome: Converter Volome
Intput Voltage(Power):110V
Weight:11KG
Voltage tester Weight: 12kg(26.5lb)
Voltage tester size: 320x280x180mm
Features：
1.Single AC 5kV Passing Type Withstand Voltage Tester
2.The output voltage is output through the regulator, featuring high reliability and high durability.
3.Using high-brightness LED digital tube to display test time, voltage, current, real-time display of breakdown current value and voltage value
4.Alarm current value can be continuously preset
5.Test time is measured by three digits
6.Equipped with the signal input and output interface required by PLC, it can easily form a comprehensive test system with PLC.
Pre-used Caution
Read the following items carefully before operating RK267 series
voltage withstand test instrument
- Use three-hole power supply plug and insure GND connection well.
- GND port and power supply GND port should be connected well
- Wear insulation glove, stand on insulation mat
- Anti-clockwisely circumvolve “V-ADJ” rotary switch to the maximum before turn on test instrument.
- Before preset all functions, reset instrument
- Don’t connect test port and test wire when doing test
- Don’t connect HV output port with shield box or GND wire to avoid instrument damage.
- Turn off power when accident take place
- Examine and repair when Indicator or annunciator is out of function
- Operate carefully to avoid hazard when take the remote test.
11.The instrument must be placed on the worktable of conductive materials
12.The operator can not wear clothes with metal decoration or wear metal accessories
13.When the tester is in the test conditions, the test line, the test probes, output end , and the test objects are all with high pressure, do not touch!
Package include:
1×Withstand voltage test equipment
1×High voltage test bar
1×Remote control test bar
1×Ground wire
1×power cord
1x instruction manual
