Condition: BRAND NEW IN ORIGINAL PACKAGING

Warranty: 1 YEAR MANUFACTURER

• (2) Memphis Audio SRX1040 10" SRX Car Subwoofer Audio Sub 400w Peak / 200w RMS 4 Ohm
• (1) Rockville dB11 1400 Watt Peak/350 Watt RMS Mono 2-Ohm Amplifier Car Amp and Bass Remote
• (1) Rockville RWK81 8 Gauge Complete Amp Installation Wire Kit with 100% Copper RCA

Description of SRX1040:

Whether it’s your first system or you just need a little more bass in your trunk, the Street Reference line is the ultimate value subwoofer on the market. Redesigned from the ground up, SR subs are indistinguishable from their predecessors with improved performance, durability and cosmetics.

Features:

• Memphis Audio SRX1040 10" SRX Car Subwoofer Audio Sub 400w Peak / 200w RMS 4 Ohm
• 12 AWG compression terminals
• Anodized aluminum voice coil former
• Optimized for both sealed and vented enclosures
• Lightweight but rigid cone design for improved efficiency
• Polypropylene cone for improved durability
• Progressive poly cotton spider for controlled motion resulting in lower distortion
• Rubber surround for improved durability

Specifications:

• Size: 10"
• RMS Power: 200w
• Peak Power: 400w
• Voice Coil: Single
• Impedance: 4-Ohm
• Sensitivity (dB): 84
• Magnet Size (Oz): 30
• Mounting Depth (in): 4.65
• Cut Out Diameter (in): 9.06
• Voice Coil Diameter: 2"
• Warranty: 1

TS Parameters:

How To Set the Gain On your Car Subwoofer Amplifier:

What's In The Box:

• (1) dB11 Amplifier
• (1) Bass Remote
• (1) Birth Sheet with Tested Power
• Owner's Manual
• Mounting Hardware
• Warranty

Features:

• Rockville dB11 1400 Watt Peak/350 Watt Dyno-Certified RMS Mono 2-Ohm Amplifier Car Amp+Bass Remote
• Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc)
  - 2 Ohm: 350 Watts x 1 Channel <1% THD+N
  - 4 Ohm: 220 Watts x 1 Channel <1% THD+N
• Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc)
  - 2 Ohm: 1400 Watts x 1 Channel
  - 4 Ohm: 880 Watts x 1 Channel
• High-Speed MOSFET Power Supply
• Optical Coupler Class "D" Technology
• Fully Adjustable 12dB / Octave Crossover with Differential Circuitry
• Low Pass Filter: 50Hz - 250Hz
• Subsonic Filter: 15Hz - 55Hz
• Phase Control
• Full IC-Controlled Protection Circuitry
• Fully Adjustable 12dB Bass Equalizer
• Mute and Delay Soft Start System
• Status Mode LED Indicator
• Minimum THD at Rated Power: <0.1%
• S / N Ratio: >90dB
• Under Voltage Protection at 10V
• Over Voltage Protection at 16V
• Frequency Response: 15Hz - 250 Hz

Video of RWK81:

Description:

The Rockville RWK81 8 AWG (American Wire Gauge) amp kit has the following diferences over other amp kits on the market at this price

AudioSavings Return Policy:

At Audiosavings, we strongly believe in customer satisfaction and therefore offer free return shipping within 30 days of purchase on all items returned to us within the continental USA.

Prior to returning merchandise, contact us and we will give you a return authorization # and a return label.

You may return this item for a refund within 30 DAYS of purchase.

Warranty Repair/Exchange Period: 1 YEAR

If your item is defective or you want to return it for any reason within the first 30 days of when it was delivered to you; you have the following options:

• We will send you a pre-paid shipping label to replace the item for a brand new one.
• We will send you a pre-paid shipping label to exchange the item for another item of your choice. If the item you chose is more or less money we will work out the price difference with you.
• If you are returning a working item in used condition for a refund there will be a 20% used item fee deducted from your refund. All replacements and exchanges are free.

Replacement/Processing Time:

Your replacement or refund will process within 3-5 business days of when we receive the item.

Please note items with physical damage un-related to shipping are not covered under warranty. Registered software cannot be returned.

You MUST notify us within 48 hours if you receive an item that was damaged during shipping.

Process for returning items

Please email us with your eBay user ID, Item code / model #, Condition of the item, and the reason for your return. Please also indicate whether you would like a replacement, an exchange, or a refund. We will supply you with a reference number (RMA #) to put on the package which will ensure quick processing of your return. All returns require a RMA# to be returned back to our facility.