Features:
Protects your hitch receiver from rust, mud and corrosion
Built-in brake light provides added safety when your hitch is not in use
Foam pad prevents rattle and ensures a snug fit
Fits all 2 in. trailer hitch receivers
1/2" thick gasket ensures a snug fit
12 bright LED lights last much longer than regular bulbs
Power 12V
Light color:red
Light shell:red
Fitment
This page features a super bright, 12-LED brake light for the trailer hitch cover that provides added safety when the tow hitch is not in use. The lamp size is a convenient 3-1/4 x 3-1/4 inches to fit 2" standard tow hitch and functions as tail/brake light or rear fog light. The lamp comes with a hitch pin with lock and has 1/4" foam lining in order to ensure that the fit is snug. The LED brake light has a flat 4-pin trailer connector (2 contacts).
Features
Built-in super bright red Smoked Lens LED brake light provides added safety when your hitch is not in use
Lamp size: 3-1/4 x 3-1/4 inches to fit 2" standard tow hitch and function as tail brake light or rear fog light
Comes with a hitch pin with lock and 1/4" foam lining to ensure a snug fit
Has a flat 4-pin trailer connector (2 contacts)
FAQ:
Q: Why does rear fog blink when turn signals are on?
A: The LED brake light is intended for use on a vehicle with a separate brake light circuit. If the vehicle actives left/right turn signal for braking, then this LED tow hitch brake light will flash on turn signal and will stay lit during braking.
Q: Why does the LED brake light fits the tow hitch, but feels loose?
A: The tow hitch cover is only secured by the tow hitch lock to make sure that it does not fall off, so the lock is not completely tight. There is already some foam in the inner side of the tow hitch cover, but if you feel that you would like the tow hitch cover to fit more snug, you can always add some foam to hold the tow hitch cover in place.
Q: What if the LED brake light wiring is not long enough for my vehicle?
A: The length of the wire for the LED brake light is designed to work for most trucks and SUVs with tow hitch. In some rare cases if the wiring is too short, you can extend the wires. Cut the adapter wires and extend the wiring.
Q: Why does the LED brake light not light up after I plugged in the adapter?
A: In some rare cases, the vehicle's positive/negative are reversed. The LED assembly is polar sensitive, the polarity reverse causes LED to not light up. This is rare, but can be fixed. Take the adapter and cut the wires. Flip the wires to reverse the polarity.
You love your truck. It's your daily driver whether you are hauling heavy cargo or just buying groceries. Maybe you're one of those guys or gals that love their truck so much they spend their time and hard earned money making their Ford, Chevy, or RAM pick up the best looking version of itself. You wash it weekly, you maintain it well. Hell, you've probably slapped on a few decals or bumper stickers on them. Or maybe you've upgraded your lights. One thing that's certain is that you utilize your truck to its fullest. Or do you?
How often do you use your tow hitch? How many times can you say you've hauled more cargo than your truck bed will allow you? Chances are it's not very often. Just when you think you've made use of every inch of your truck, your tow hitch is left alone in the back. Sure it's useful when you need it, but why not make use of it all the time? Enter the tow hitch mounted LED tail brake light.
The tow hitch mounted LED tail/brake light can fit any 2" standard size trailer hitch receivers. This will NOT fit a 1-1.25" trail hitch receiver. Your truck or SUV must also come with a standard 4-pin trailer adapter for the LED brake light to power. If it does not, you will have to purchase a 7-pin to 4-pin adapter.
What if the LED brake light wiring is not long enough for my vehicle?
The length of the wire for the LED brake light has been designed to work for most trucks and SUVs that have a tow hitch. In some rare cases if the wiring is too short for a particular vehicle, you can always extend the wires. Simply cut the adapter wires and extend the wiring to your desired length.
Why does the LED brake light not light up after I plugged in the adapter?
For this LED tail/brake light to light up, the 4-pin adapter must have a +++/- configuration (+ for running, left and right turn signals; - for ground). In some rare cases, the stock vehicle's positive/negative are reversed (---/+). Since the LED assembly is polar sensitive, the reversed polarity will cause the LED to not light up.
If your truck or SUV's 4-pin receiver's polarity is ---/+, cut the LED brake light's plug, flip and reconnect it to reverse its polarity.