Specifications:
Quantity: 4pcs
Thickness: 1.25 inch (32mm) per spacer
Hub Bore Size: 87mm
Vehicle Bolt Pattern: 6x135mm
Wheel Bolt Pattern: 6x135mm
Thread Pitch: M14x2
Fitment:
For Ford Expedition 2003-2014
For Ford F-150 2003-2014
For Lincoln
For Lincoln Mark LT 2006-2008&2010-2014
For Lincoln Navigator 2003-2014
Description:
Using high quality aerospace aluminum;
Designed to move the wheel further out from the hub;
Gives your car a more aggressive stance & allows for better handling characteristics;
Fitment, Quality, & Durability tested;
Eliminate wheel/tire rubbing instantly;
Mount larger wheel or tires;
Increase driving stability;
Aggresive stance.No special tools required;
Extremely fast and easy;
Easy as changing a tire;
All needed is a lug wrench and jack;
Same as changing a tire.
NOTE:
Please make sure that these are the correct application for your vehicle. We do not guarantee any fitment onto any vehicle,we only guarantee that you will receive the item described as the above. Returns are only accepted if unused and not installed.(ReturnsARE NOT ACCEPTED IF SPACERS-ADAPTERS HAVE BEEN INSTALLED TO YOUR VEHICLE)
INSTALLATION TIPS
1.Please Make Sure You Take The Proper Measurements Before Purchasing.
2.Make Sure You Get 5-7 Turns Before Tightening.
3.Suggested To Be Torqued Down By Hand At 85 FT/LBS.
4.The Back Of The Adapter Must Sit Flush On The Hub.
Important Installation Notes:
1. Make Sure You Get 5-7 Turns Before Tightening
2. Must Be Torqued Down By Hand At 110 FT/LBS.
3. The Back Of The Adapter Must Sit Flush On The Hub
4. No Gap Between The Adapter & Hub. Center The Adapter.
5. Please Make Sure You Take The Proper Measurements Before Purchasing
6. Failure to follow proper procedure may cause your lug nuts to come loose while driving.
Benefits:
1. Improve Vehicle Stability:
2. Wheel spacers widen your vehicle wheel base, increasing stability, aggressive stance is a free bonus
3. Increase Clearence:
4. Wheel spacers increase tire to frame clearence to allow installation of lift/lowring kits and wider/larger, high traction tires.
5. Hardened CR-Steel Studs:
6. Forged, heat-treated and hardened ISO/DIN 10.9 (SAE Grade 8) wheel bolts deliver strength and corrosion resistance.