AOPUTTRIVER AP-570S-APP Digital Clamp Meter,Volt Amp Ohm Tester, 6000 Count Multimeter with Auto Range, AC/DC Voltage, AC/DC Current, NCV, True RMS Resistance, Capacitance, Temperature, Diode Test for Industry or Home
- This is the upgrade version of AOPUTTRIVER AP-570C-APP, this upgraded chipset making DC current testing more accurate. 6000Counts display, with Fahrenheit Temperature Testing and True RMS, NCV function.
- 【Wide Range Clamp Meter】 With 6000 counts display, the clamp meter can measure DC/AC voltage;AC/DC current,Resistance,Capacitance,Temperature ,Frequency,Diode Test. The clamp meter has manual/automatic ranging which can adjust the operation method according to your usage habits.The jaw size up to 1.77in/45mm to measure a cable which is thick enough.
- 【Multi-Function Multimeter】With Data hold, LCD Backlight, Relative value, Continuity buzzer,Connect to Phone by APP. Through the Backlight function, you can measure in the darkness and read the data clearly by the large LCD screen.
- 【Auto Connect To Your Phone Via Bluetooth】AP-570S-APP clamp multimeter come with APP Supported, you can connect to your smart phone via Bluetooth to monitor clamp meter measurement in real time. With this APP-Multimeter, you can transfer the data and analysis it in real time on your phone. The mobile APP can be installed on iPhone 4S iOS or Android 4.30 or higher.
- 【Safety & Over Load Protection】 AP-570S-APP Clamp Meter is up to the standards of IEC1010 Double Insulation, Pollution Degree 2, Over voltage Category Ⅲ and overload protection. It will show "OL" on the LCD if over range.
- Range Selection: Auto Ranging
- Max Display: 6000
- Duty cycle:0.1%~99.9%
- True RMS
- Temperature Testing: (K-type sensor, Celsius, Fahrenheit Unit: -20~1000 ° C, -4 ~ 1832 ° F)
Features:
√ Data Hold YES
√ Diode Test YES
√ Auto power off YES
√ Backlight Display YES
√ NCV Testing YES
√ True RMS YES
√ Overload P rotection YES
√Temperature: Celsius, Fahrenheit Unit YES
√ Phone APP Connection YES
Range | Resolution | Accuracy |
600mV | 0.1mV | ±(0.5% of rdg + 2 digits) |
6V | 1mV | |
60V | 10mV | |
600V | 100mV | |
1000V | 1V | ±(0.8% of rdg + 2 digits) |
AC Voltage (True RMS)
Range | Resolution | Accuracy |
6V | 1mV | ±(1.0% of rdg + 3 digits) |
60V | 10mV | |
600V | 100mV | |
750V | 1V | ±(1.5% of rdg + 3 digits) |
DC Current
Range | Resolution | Accuracy |
600A | 100mA | ±(2.5% of rdg + 10 digits) |
1000A | 1A | ±(3.0% of rdg + 10 digits) |
AC Current (True RMS)
Range | Resolution | Accuracy |
600A | 100mA | ±(2.5% of rdg + 10 digits) |
1000A | 1A | ±(3.0% of rdg + 10 digits) |
Resistance
Range | Resolution | Accuracy |
600Ω | 0.1Ω | ±(1.0% of rdg + 3 digits) |
6kΩ | 1Ω | ±(1.0% of rdg + 2 digits) |
60kΩ | 10Ω | |
600kΩ | 100Ω | |
6MΩ | 1kΩ | |
60MΩ | 10kΩ | ±(1.5% of rdg + 3 digits) |
Capacitance
Range | Accuracy | Resolution |
6nF | ±(5.0% of rdg + 10 digits) | 1pF |
60nF | ±(3.0% of rdg + 10 digits) | 10pF |
600nF | 100pF | |
6µF | 1nF | |
60µF | ±(5.0% of rdg + 10 digits) | 10nF |
600µF | ±(10.0% of rdg + 20 digits) | 100nF |
6mF | 1µF | |
60mF | 10µF |
Frequency
Range | Accuracy | Resolution |
9.999Hz | ± (0.1% of rdg + 5 digits) | 0.001Hz |
99.99Hz | 0.01Hz | |
999.9Hz | 0.1Hz | |
9.999kHz | 1Hz | |
99.99kHz | 10Hz | |
999.9kHz | 100Hz | |
9.999MHz | 1kHz |
Temperature
Range | Accuracy | Resolution | |
℃ | -20~150℃ | ± ( 3℃+ 1digit ) | 1℃ |
150~1000℃ | ± ( 3% of rdg + 2digits ) | ||
℉ | -4~302℉ | ± ( 5℉+ 2digits ) | 1℉ |
302~1832℉ | ± ( 3% of rdg + 3digits ) | ||
- 1 * AOPUTTRIVER AP-570S-APP Clamp Meters
- 1 * Test Lead
- 1 * Temperature Probe
- 1 * English Manual
- 1 * Storage Bag (Battery is not included)
