Heat Transfer Vinyl Iron On
Can be ironed to Cotton, Poly/Cotton Blend and Polyester.
Warning: It will not work on waterproof material
or nylon.
INSTRUCTIONS:
Preheat garment, press
with heat press for 5 seconds.
Remove transfer backing.
Position and place cover sheet over graphic. You
can use a parchment paper or teflon / cooking sheet.
Apply heat with a Heat Press or House Iron at 300F for 10~15
seconds. Medium pressure. House Iron set to Cotton or Linen. You need to press the whole transfer. If
transfer is bigger than iron surface area, press in parts. House Iron set to
Cotton or Linen. Search online for “Apply HTV with an Iron”
Warm peel the
transparent masking tape.
Final Press. After
removing the masking film, place a teflon/cooking sheet over transfer and press
for 5 seconds.
Do not wash shirt, mask
or fabric where vinyl was applied before 24 hours after heat pressed.
Washing
Instructions:
Machine wash COLD with
mild detergent. NO bleach. Dry at a normal dryer setting on household machines.
Do not dry clean.