eBay
eBay
 Fast Delivery
 Order online, by phone or in-store
 Dedicated customer service
 Easy exchange or refund policy
Sentinel
MIBI

QUICRUN Fusion SE for Crawler - 1800KV- 540 Spec -- HW30404317

£89.18
Brand: Hobbywing
SKU: HW30404317
Barcode: 5051294182892

We offer combined shipping on most items, simply add them all to the basket and you'll be charged a single postage charge.

*Images are for illustration purposes only. Actual product may vary.
Description
Introducing the QUICRUN Fusion SE for Crawlers from Hobbywing.  A combined speed control and motor package.

Aesthetically Appealing
The Fusion SE provides an integrated space-saving design forbuilders. With a 58mm length, the Fusion SE has been shortened slightly to allow it to fit into more vehicles.

FOC Powered
With proven design heritage FOC has been a game changer for the crawling segment. The extreme efficiency operates at lower temps and provides extended runtimes. The nearly silent operation provides amazing power and response at all speeds while providing extremely low RPM control. Compared to normal brushless, FOC systems provide a dramatic increase in response and power delivery.

The smart torque output control feature of the built-in FOC ESC ensures unmatched downhill and uphill driving. The ESC can automatically adjust the motor output to RPM to match the driver inputs.

Intelligent Torque Output
Intelligent Torque Output is a smart management system that allows the ESC to adjust the motor for inclines or descent under any load to match the throttle.

U- matched hill holding
With 8 levels of drag brake force (Power) and 9 levels of Drag Brake Rate, drivers can fine-tune their vehicle’s hill-holding power and general driving. Overall, drag brakes can be 2 times stronger than normal brushless setups.

Designed for Durability
Silicon rubber gaskets, electronic buttons, and quality hardware ensure a long life for the Fusion SE. Made to take the abuse and conditions of daily RC bashers.

Ready for all weather and track conditions.
IP-67 waterproof rating ensures the Fusion SE has protection from water, dust, and about anything else that gets thrown at it. Designed to withstand all conditions time and time again.

Note: The IP67 protection level mentioned above is splash-resistant, water-resistant and dust-resistant under normal use, and is tested under controlled laboratory conditions. Its effect is in the GB / T 4208-2017 (domestic) / IEC 60529 (overseas) standard to IP67 level. Splash, water and dust resistance are not permanently effective, and the level of protection may decline due to aging. Do not soak for a long time to avoid damaging the product.

Specifications

Scale - 1/10th
Brushed/Brushless - BL
Sensored/Sensorless - SD
Waterproof - Waterproof
Cont./Peak Current - 40A
Input Voltage - 2-3S Lipo/6-9 Cell NiMH
BEC Output - 6V/7.4V@4A、6A peak
Motor KV - 1200KV & 1800KV
Diameter/length of Motor - 36mm / 58.1mm
Shaft diameter / exposed shaft length - 3.175mm / 16.5mm
Motor Poles - 4

Wires & Connectors

Input Wires - Red-14AWG-200mm*1 / Black-14AWG-200mm*1
Input Connectors - XT60
(Note: All the wire length above is the original length not the length you see from the outside.)

ESC Programing via

SET Button on ESC - Not Supported
LED Program Box - Supported
LCD Program Box - Not Supported
OTA Programmer - Not Supported
Program Port - Independent programming interface(switch position)

Firmware

Firmware Upgrade - Not Supported

Size & Weight

Size - 36X58.1mm
Weight - 201g (including wires&connectors

Applications

Vehicles - 1/10throck crawler

MIBI

What is MakeItBuildIt about? In short, it’s great products at a good price with fast delivery and excellent customer service. All backed up with knowledge from years of experience.

We are passionate about Radio Control, be that Drones and FPV freestyle / Racing, Cars, Trucks, Planes or Boats. Having been part of FPV racing since its birth in the UK and supporting both FPV events and pilots it’s still very close to our hearts.

For us, it's more than just selling a product, it is about wanting you to get the best out of our fantastic hobby and sport, be that in the air, on land or on/under water

View All Items

All deliveries are bound by the courier or royal mail delivery times and cannot be 100% guaranteed, we will do everything in our power to ensure your purchase is picked, packed and issued to the correct delivery service in a timely manner, after that we are in the hands of the selected courier for the final delivery.

We offer combined shipping on most items, simply add them all to the basket and you’ll be charged a single postage charge.

If for any reason you are dissatisfied with your purchase, we offer a 30 day money back guarantee on all our items that are UNUSED and in their original packaging. Should you receive an item from us that you believe to be faulty, please contact us first to allow us to confirm / diagnose the fault and in many cases, we can provide an immediate solution.

All refunds are at our discretion and will only be issued once we have received the returned item(s) and are satisfied that they are in unused condition. We advise that all returned items should to be sent recorded / signed for and insured to the correct product value as Make It Build It cannot be held responsible for returned items that are lost or damaged in transit. Please be aware that any refunds will not include your return postage cost.

We accept Paypal, credit and debit cards, both online and over the phone

We send:

If you need to get in touch then please see our full contact information in the Business Seller Information section at the bottom of this page or Contact Us

Whilst we do everything that we can to ensure our customers are happy, sometimes things go wrong. If, for whatever reason, you have an issue with delivery or the items you have purchased, please contact us first before leaving feedback as most issues can be resolved with us directly so your feedback will reflect our service.

Description
Introducing the QUICRUN Fusion SE for Crawlers from Hobbywing.  A combined speed control and motor package.

Aesthetically Appealing
The Fusion SE provides an integrated space-saving design forbuilders. With a 58mm length, the Fusion SE has been shortened slightly to allow it to fit into more vehicles.

FOC Powered
With proven design heritage FOC has been a game changer for the crawling segment. The extreme efficiency operates at lower temps and provides extended runtimes. The nearly silent operation provides amazing power and response at all speeds while providing extremely low RPM control. Compared to normal brushless, FOC systems provide a dramatic increase in response and power delivery.

The smart torque output control feature of the built-in FOC ESC ensures unmatched downhill and uphill driving. The ESC can automatically adjust the motor output to RPM to match the driver inputs.

Intelligent Torque Output
Intelligent Torque Output is a smart management system that allows the ESC to adjust the motor for inclines or descent under any load to match the throttle.

U- matched hill holding
With 8 levels of drag brake force (Power) and 9 levels of Drag Brake Rate, drivers can fine-tune their vehicle’s hill-holding power and general driving. Overall, drag brakes can be 2 times stronger than normal brushless setups.

Designed for Durability
Silicon rubber gaskets, electronic buttons, and quality hardware ensure a long life for the Fusion SE. Made to take the abuse and conditions of daily RC bashers.

Ready for all weather and track conditions.
IP-67 waterproof rating ensures the Fusion SE has protection from water, dust, and about anything else that gets thrown at it. Designed to withstand all conditions time and time again.

Note: The IP67 protection level mentioned above is splash-resistant, water-resistant and dust-resistant under normal use, and is tested under controlled laboratory conditions. Its effect is in the GB / T 4208-2017 (domestic) / IEC 60529 (overseas) standard to IP67 level. Splash, water and dust resistance are not permanently effective, and the level of protection may decline due to aging. Do not soak for a long time to avoid damaging the product.

Specifications

Scale - 1/10th
Brushed/Brushless - BL
Sensored/Sensorless - SD
Waterproof - Waterproof
Cont./Peak Current - 40A
Input Voltage - 2-3S Lipo/6-9 Cell NiMH
BEC Output - 6V/7.4V@4A、6A peak
Motor KV - 1200KV & 1800KV
Diameter/length of Motor - 36mm / 58.1mm
Shaft diameter / exposed shaft length - 3.175mm / 16.5mm
Motor Poles - 4

Wires & Connectors

Input Wires - Red-14AWG-200mm*1 / Black-14AWG-200mm*1
Input Connectors - XT60
(Note: All the wire length above is the original length not the length you see from the outside.)

ESC Programing via

SET Button on ESC - Not Supported
LED Program Box - Supported
LCD Program Box - Not Supported
OTA Programmer - Not Supported
Program Port - Independent programming interface(switch position)

Firmware

Firmware Upgrade - Not Supported

Size & Weight

Size - 36X58.1mm
Weight - 201g (including wires&connectors

Applications

Vehicles - 1/10throck crawler

MIBI

What is MakeItBuildIt about?
In short, it’s great products at a good price with fast delivery and excellent customer service. All backed up with knowledge from years of experience.

We are passionate about Radio Control, be that Drones and FPV freestyle / Racing, Cars, Trucks, Planes or Boats. Having been part of FPV racing since its birth in the UK and supporting both FPV events and pilots it’s still very close to our hearts.

For us, it's more than just selling a product, it is about wanting you to get the best out of our fantastic hobby and sport, be that in the air, on land or on/under water

View All Items

All deliveries are bound by the courier or royal mail delivery times and cannot be 100% guaranteed, we will do everything in our power to ensure your purchase is picked, packed and issued to the correct delivery service in a timely manner, after that we are in the hands of the selected courier for the final delivery.

We offer combined shipping on most items, simply add them all to the basket and you’ll be charged a single postage charge.

If for any reason you are dissatisfied with your purchase, we offer a 30 day money back guarantee on all our items that are UNUSED and in their original packaging. Should you receive an item from us that you believe to be faulty, please contact us first to allow us to confirm / diagnose the fault and in many cases, we can provide an immediate solution.

All refunds are at our discretion and will only be issued once we have received the returned item(s) and are satisfied that they are in unused condition. We advise that all returned items should to be sent recorded / signed for and insured to the correct product value as Make It Build It cannot be held responsible for returned items that are lost or damaged in transit. Please be aware that any refunds will not include your return postage cost.

We accept Paypal, credit and debit cards, both online and over the phone

We send:

If you need to get in touch then please see our full contact information in the Business Seller Information section at the bottom of this page or Contact Us

Whilst we do everything that we can to ensure our customers are happy, sometimes things go wrong. If, for whatever reason, you have an issue with delivery or the items you have purchased, please contact us first before leaving feedback as most issues can be resolved with us directly so your feedback will reflect our service.

  Sign up for our latest News & offers

Sign Up