Please choose the desired jig/jigs for your machine in the drop down menu


Tormek Double Function Double Sided Stone Grader SP-650 / 910080
Use the coarse side regularly to keep the stone open and effective.
Also, this will practically get you two grindstones in one.
The fine side will change the function of the Tormek grindstone from fast grinding at 220 grit to fine grinding at a 1000 grit surface.
KEY FEATURES
•Unique double-sided stone
•Can also be used to dress or open out stone

from Tormek comes a jig for sharpening short carving tools and chisels down to 45mm long, including power carving tools (Bosch, Proxxon, AMT etc). Used in conjunction with the Universal Support, the jig is automatically held square to the grindstone.
For short carving tools and chisels
Also suitable for power carving tools

Tormek SVM-00 Small Knife Sharpening Holder - 504136
The new holder works with the Tormek Knife Jig SVM-45.
Your knife’s handle, rather than the blade, mounts in the SVM-00 holder.
The SVM-00 then clamps into the SVM-45.
Using this system there is really no limit to how small a blade you can sharpen.
Small knife blades are difficult to sharpen at the best of times. Normally sharpened free hand, consistent shape and edge angle are always a challenge.
The SVM-00 opens up the ability to work with complete control on a wide range of small knives.
You can now sharpen knives of different shapes for whittling, chip carving and detail work.
The SVM-00 can also handle narrow chef’s knives like boning or fish filleting knives.
You can even sharpen small blades of folding knives with perfect control.

TORMEK SVD-186R GOUGE JIG HAP 106608
Use the SVD-186R for sharpening woodturning gouges (bowl, spindle and fingernail) to a razor like edge.
The Tormek SVD-186R can also handle most carving gouges up to 36mm wide, carving vee tools and multi-tip scraper blades with mounting holes from 5mm to 8mm diameter.
The SVD-186R and Tormek wetstone machine combination offers three crucial benefits.
The water cooled wheel results in a superior edge, longer lasting and one that leaves a finer finish.
The jig gives you full control over bevel angle and shape.
The jig gives you exact repeatability next time you need to sharpen your tool.
A curved clamping disc ensures correct seating of your tool in the tool holder.
The angle setting has a precise click feature making initial jig set-up easy.
The SVD-186R fits all Tormek machines.

Tormek SVP-80 Profile Knife Jig Brand New 701403 SVP80
Recommended for the T8
Sharpens profiled spindle moulder knives.
The knife is held securely in position with a magnet and guide pins which match the safety pin holes in the knife.
The jig can be used to sharpen all makes and shapes of moulding knives with 24/30/38mm between centres up to a maximum width of 100mm.

Tormek SVD-110 Toolrest Brand New 910083 SVD110
A universal tool rest that is easy to adjust and thanks to the patented design, stays just where you set it.
The wide plate is just the job for the sharpening of turning scrapers, carving scorps, inshaves, screwdrivers and re-truing of cabinet scrapers.

Tormek SVH-320 Planer Knife Jig 910085 SVH320
Recommended for the T8
A well designed jig used for re-grinding both guillotine blades and power planer knives of any length and minimum width of 13mm.
Grinds each blade identically so they are never out of balance.
This jig allows you to measure exactly how much is to be removed.
Tormek T-7 is recommended for this jig.

Tormek SVM-140 Knife Jig 702085 For Long & Thin Knives Blades
This knife jig is developed especially for long and flexible knives, e.g. filleting knives.
Its broad clamping area, 140mm (5.1/2"),
stabilises a thin blade but is also suitable to use for knives with longer blades, from 160mm (6.1/4")

Get sharp and get even with the Tormek KJ-45 Centring Knife Jig. It works with both Tormek T-4 and Tormek T-8 machines, as well as older models. Using the KJ-45 you can achieve symmetrical bevels with the same angle on both sides of your knife, regardless of the thickness or geometry of the blade. Whether you're sharpening a regular kitchen knife or a thick utility knife, you'll get the same results on both bevels of the knife without needing to reset the jig. Restore the blade to its original edge angle or choose the angle you prefer. The jig rests freely onto the Universal Support so you can follow the curve of the bladel. The KJ-45 Centering Knife Jig fits most types of knives: household knives, chef's knives, craft knives and knives for hunting and fishing. It also works for carver's drawknives and gardener's pruning shears. The KJ-45 features an extra stop for tall knives, such as cleavers. You can even put a slightly convex edge on a knife by moving between the two stops. The KJ-45 takes knives with blades down to 60mm long and 12mm wide. For smaller knives, you can combine the knife jig with the SVM-00 Small Knife Holder, which enables you to sharpen even your very smallest knives. In common with all Tormek jigs the KJ-45 is robust with zinc-cast clamps and fibreglass-reinforced composite stops.

New Tormek SVX-150 Scissor Brand New
A jig from Tormek for all sizes of scissors, you can even sharpen garden shears. Two clamps hold the blade securely.
For all sizes of scissors and most garden shears
Two clamps hold blade securely

Tormek TTS-100 Turning Tool Setter 202517
This unique turning tool setter enables exact replication of the edge on bowl and spindle gouges as well as on flat and oval skews with a straight or a curved edge.
The setter works with the Gouge Jig SVD-186 and the Multi-Jig SVS-50.
The strength of the setter is that it works irrespective of the stone diameter and always produces the same edge angle.
Built-in settings give pre-determined edge geometries as recommended by experienced turners.

Tormek SVD005 Conversion Upgrades the SVD-180 jig To SVD-185 910082
Upgrading kit for the SVD-180 jig, Upgrades the SVD-180 jig to the new version SVD-185.
For sharpening of turning cutters.
KEY FEATURES
•Upgrades the SVD-180 jig to the new version SVD-185
•For sharpening of turning cutters

Tormek AWT-250 Advanced Water Trough 210294
This improved design includes a removable chute to catch every drop,
helping to prevent spills and mess when sharpening longer tools.
Fits the Tormek T-7 and all of the Tormek 2000 series.

Tormek PA-70 Honing Paste T8 T7 or T3 T4 PA70 Compound Paste Polish
For application on the leather honing wheelsKey Features
Grain size 3 micron (average)
Removes the burr and polishes the edge to a mirror finish

Tormek SE-77 Square Edge Jig Brand New
For plane irons and wood chisels.
This second generation Tormek design makes it easy to mount the tool straight in the jig.
Safety stops prevent the tool from slipping off the stone.
Max tool width 76mm (3"), max tool thickness 9mm (3/8").

TORMEK EZYLOCK MAIN SHAFT KIT FOR T3 T-3 211103
The new Tormek EzyLock shaft kit includes a self-tightening knob to secure the grindstone.
No tools are required and you don’t need to exert any pressure on the nut to secure the grindstone.
EzyLock makes it very easy to change grindstones, from the standard aluminum oxide to either of the specialty stones.
The shaft and washer are made of stainless steel.
The nut is also stainless steel for the T-7 and a composite material for the T-3.
The kit includes an EzyLock Shaft, EzyLock Nut, two replacement nylon bearings, cross pin, stone washer and drive wheel washer.
The MSK-250 fits the T-7, Tormek 2000 and any 250mm motorized Tormek of any age.
The MSK-200 fits the T-3 and any other 200mm Tormek machine.

TORMEK EZYLOCK MAIN SHAFT KIT FOR T7 T-7 211102
The new Tormek EzyLock shaft kit includes a self-tightening knob to secure the grindstone.
No tools are required and you don’t need to exert any pressure on the nut to secure the grindstone.
EzyLock makes it very easy to change grindstones, from the standard aluminum oxide to either of the specialty stones.
The shaft and washer are made of stainless steel.
The nut is also stainless steel for the T-7 and a composite material for the T-3.
The kit includes an EzyLock Shaft, EzyLock Nut, two replacement nylon bearings, cross pin, stone washer and drive wheel washer.
The MSK-250 fits the T-7, Tormek 2000 and any 250mm motorized Tormek of any age.

Tormek XB-100 Horizontal Base Can be mounted on all Tormek 910095 XB100
You'll have better control when sharpening turning tools and carving tools if the stone is turning away from the cutting edge.
By adding the Tormek Horizontal Base to your older Tormek you can move the Universal Support from vertical mount (wheel turning into edge) to horizontal mount (wheel turning away from edge).
The Owner's Handbook gives you recommended mounts for various tools and jigs.
Includes all necessary mounting hardware.
This base is now standard on the latest Tormek.

TORMEK WM-200 PRO ANGLEMASTER 368028
The WM-200 gives angle setting with pin point accuracy from 15° to 75° on grindstones of 6" to 10" in diameter, thus taking into account wear after years of use.
The WM-200 is also provided with angle checking notches around its edge to enable bevel angles to be repeated or progress checked.

TORMEK BGM-100 BENCH GRINDER MOUNTING SET 210952
There is distinction between shaping and sharpening.
Once the tool is shaped, you just want to touch up the edge, never removing more steel than necessary.
The time consuming initial shaping is now possible using a bench grinder in conjunction with the Tormek BGM-100 Mounting Set as it can be done faster on a bench grinder than on the Tormek whetstone system.
With the BGM-100 you can use your Tormek jigs and setting devices on a bench grinder, giving you perfect control and making the transfer to your Tormek for final finishing simple.
The shape and edge angle are precisely repeatable even when you move onto the larger diameter wheel of a Tormek machine.
This means you can benefit from the fast steel removal of the bench grinder and get the finest surface on the water cooled grindstone and the leather honing wheel.
The BGM-100 also allows the use of other Tormek woodturners jigs in combination with a bench grinder such as the SVS-50 Multi-jig and SVD-110 Toolrest.
The BGM-100 comprises a horizontal base, a Tormek universal tool support, fixing kit and complete instructions.
Suitable for most 150, 200 or 250mm double ended bench grinders.

Tormek Rubber Work Mat RM-533 533mm x 343mm 507245
Suitable for use with all Tormek machines.
The Tormek RM-533 Rubber Mat gives you a waterproof yet non-slip surface.
The raised rim will retain any water spillage. 533×343 mm.

Tormek HB-10E Handbook T7 & T3 910075 manual
The appreciated Tormek Handbook explains the basics of edge tool sharpening, gives you useful tips and an easy, step by step approach to the Tormek method of sharpening.

ACC-150 Anti-Corrosion Concentrate makes the water corrosion inhibitant and protects your diamond grinding wheels to prevents them from rusting. The anti-corrosion concentrate is always used for wet sharpening with diamond grinding wheels. Anti-corrosion concentrate won't harm your regular grindstones if you have it in the water, so you can keep treated water if you want to switch between a diamond grinding wheel and a grindstone, and then back again.

The universal support forms the base for the Tormek wet grinding system. The US-103 Universal Support with Micro Adjust T-4 has a trapezoidal thread with flat thread tips that won't be damaged by the locking knob. The universal support is also equipped with Micro Adjust for quick and precise setting of the sharpening angle and sharpening depth.

The US-430 Extended Universal Support is designed for sharpening long or tall tools, such as long knives, meat cleavers and machetes. Like our other universal supports, it has a Micro Adjust scale for precision setting of the sharpening angle.

The MB-102 Multi Base allows you to sharpen on the side of Tormek's diamond grinding wheels. This results in a completely flat bevel, which is preferable in certain applications. The MB-102 Multi Base is fully adjustable for optimal settings for each tool and jig. It also converts the horizontal mounts to vertical, for easier access when sharpening knives edge trailing, and for guided honing using knife jigs.

KS-123 Knife Angle Setter

The KS-123 Knife Angle Setter is your key to achieving precise sharpening angles for any type of knife. Whether you’re working with straight blades or tapered ones, this patented and sophisticated solution simplifies the angle setting process and ensures precision every time.

The KS-123 Knife Angle Setter is a compact and robust tool with dimensions of 156 mm in width, 58 mm in depth, and 70 mm in height. Crafted from durable cast zinc and composite materials, it is designed to fit all Tormek machines with a universal support, this analogue angle setter relies on exact geometric measurements for consistently accurate angle calculations. Its self-adjusting design accommodates different grinding or honing wheel diameters, making it a versatile addition to any sharpening setup.

Whether you’re a seasoned chef, a woodworking enthusiast, or simply someone who appreciates a well-sharpened knife, the KS-123 provides precise angle setting to enhance your sharpening process.

With the KS-123, upgrading your knife sharpening is effortless – it’s precision made as easy as 1-2-3!



For any further information please contact us