This is a PendoTECH TT1 Temperature Sensor Transmitter w 4-20mA out, 24V PS, 2 Sens Cables.

What you will get:

• 1 PendoTECH TT1 Temperature Sensor Transmitter w 4-20mA out, 24V PS, 2 Sens Cables
• 2 PDKT-650-TEMPB 3.0m Re-usable Temperature Sensor Cable with 1/4 phone Jack for Barb Sensors
• 1 4-20mA output cable PDKT-TT2-PMAT (That has plugs that might plug into a PressureMAT PMAT2A or PMAT4A.  See my other items for these listings.
• 1 24 Volt US Plug Power Supply

No sensors are included.

This is my item D89 2413, D89 2414, D89 2415, D89 2425.  4 were available at listing time.  Check out my other items where I have other PendoTECH scientific equipment and accessories for sale.


More Information:
PDKT-TT1 PendoTECH Temperature Sensor Benchtop Transmitter with 4-20mA output in ABS plastic box with 24VDC wall supply (for 2 sensors).

Comes with assorted cables shown above.

The PendoTECH Temperature Sensor Benchtop Transmitter connects to the PendoTECH Temperature sensor and produces a 4-20 milliamp signal that is linear with temperature. It is available in 1-, 2- and 4-channel models. The transmitter has a rugged ABS plastic enclosure and an LED front panel power indicator. Electrical connections are located on the back panel. Digital technology and the narrow 4-20mA output range from 0 to 70ºC ensures accurate and drift free linearization of the sensor output.

Connections to the unit are quick and convenient. It is powered by a 24VDC wall supply that has universal voltage input (100-250VAC). The reusable temperature sensor cable plugs into the back of the unit. The 4-20mA output may be interfaced to PendoTECH products by the included interface cable. To maintain CE compliance, input wires must be less than 10ft. in length which is the maximum length of the PendoTECH reusable monitor cables. Additional wire length also adds additional resistance which can impact accuracy so extensions are not recommended.

Input
Range 0-70°C
Burnout Signal Upscale 22mA
Sensor Lead Length <10feet (to maintain CE)
Sample Rate 500mS per Reading
Accuracy ±0.14°C
Thermal Drift Zero ±0.01°C/°C ; Span 50ppm
Connection 1/4inch headphone receptacle
Output
Output 4 to 20 mA, (spans to
temperature range of 0-70°C)
Maximum Output Range 3.8 to 22mA
Accuracy* ± 5µA
Thermal Drift ± 2µA/°C
Enclosure ABS Plastic with rubber feet
Operating Voltage 24VDC
Response Time^ 500mS to reach 70% of final value
Max Loop Resistance 800ohms
Input/Output Isolation Not Isolated
Warm-up Time 2 Minutes to full accuracy
EMC Emissions : BS EN61326; Susceptibility: BS EN61326
Ambient Temp. Range -20 to 80°C
Ambient Storage -40 to 80°C
Ambient Humidity 0 to 95% (Non condensing)
Dimension 6.25inch (w) x 3.125inch (h) x 3.063inch (l)
Weight 370grams
Unit Shown with Interface
Cable to PendoTECH
Control System
Output Receptacle Schematic
Response time of transmitter only
* Total system accuracy is transmitter + sensor accuracy