Description

 

Godox FT-16S Remote Flash Trigger 433MHZ Wireless Remote Control 16 Channels 164FT For Godox VING

Description:
The flash remote control allows you to wirelessly control the various functions of flash and trigger the flash simultaneously.

The remote control consists of a transmitter and a receiver. In addition to the basic flash trigger function, it can separately control the power of 16 groups of flashes (equipped with wireless control sockets), the switch of modeling light or auxiliary focus light, and buzzer switch. 16 channels that do not interfere with each other. The remote control distance is more than 50m/164ft, and the signal is stable. The wireless control center at your fingertips.

Features:
- Wireless control of the power of 16 flash groups
- Remotely control modeling light or focus light, and buzzer switch
- Wirelessly synchronous triggering and flashing
- Large area LCD screen clear and easy to understand
- The receiver is mini and lightweight, powered by your flash
- Control distance is over 50m/164ft. The maximum synchronization speed is 1/250 second
- Two power display modes (5.0~10.0 or 1/1~1/128)
- Easy to install on camera hot shoe and to use
- FT-16S: For Godox VING series flashes
- Single point hot shoe supports common brand SLR cameras on the market such as for Canon, Nikon, Pentax and Olympus

Functions:
- Wireless power control: support remote control of flash power, modeling light or focus light, and buzzer switch
- Trigger flash: support wireless synchronization to trigger flashes. Trigger the flash by the trial flash button, the control distance is over 50m/164ft, and the maximum synchronization speed is 1/250 second
- When using with Cells II, wireless power control and high-speed synchronization can be realized at the same time. The remote flash trigger are compatible with Godox Cells II high-speed remote controller. A FT-16S receiver and a Cells II remote control can also achieve high-speed synchronization (up to 1/8000 second synchronization speed, depending on camera models). In order to achieve wireless power control and high-speed synchronization at the same time, FT series transmitters, FT series receivers, and Cells II-C can be used at the same time
- Flash group: Support wireless control of the power of 16 flash groups. The receiver and transmitter have a 16-level power selector switch. Through 16 gears (i.e. 0-9 and A-F), 16 groups of flashes can be controlled separately. Install the receiver on several lights (or one light), and set the power selector switch of the receiver to the same gear as a flash group. Install the transmitter on a camera or hold it in your hand, and set the same gear as the receiver. After setting it, you can remotely control the flash

Installation and Use:
The receiver is directly powered by a flash, and no additional power supply is required. Easy to install and operate. The transmitter is equipped with a hot shoe, which can be used in hand or directly inserted into a camera hot shoe. The receiver only needs to be directly plugged into the corresponding wireless control socket of the flash body

Specifications:
- Model: FT-16S
- Receiver power supply: 5V (powered by flash)
- Transmission frequency: 433MHz wireless transmission
- Remote control distance: 50m/164ft (open area)
- Flash control: flash power; modeling light or focusing light; buzzer; remote control system conversion; flash trigger
- Maximum synchronization speed: 1/250 second
- Channels: 16
- Transmitter size: 97.6 x 49.9 x 36.95mm/3.8 x 2 x 1.5"
- Net weight of whole set: about 70g/0.15 lb
- Receiver size: 55 x 27 x 9mm/2.2 x 1.1 x 0.4" (LxWxH)

Package Included:
- 1 x Transmitter
- 1 x Receiver

Note:
- Batteries are not included. 2pcs 1.5V AA batteries are needed for the transmitter.