Features:
Each dripper can be adjusted individually, and different dripping speeds can be adjusted according to the different water demand of each plant. In the smallest case, the dripper can be completely closed without dripping.
Product connection requirements:
1. The faucet needs to have an external thread. If not, choose a faucet with an outer diameter of no more than 20mm to connect it with a universal interface connector. 2 faucet connectors are optional, which perfectly connects the water source.
2. Simple installation, convenient use, and resource saving. Make full use of the principle of thermal expansion and contraction in the installation. After the pipe is cut, please use the freshly boiled water bubble to cut both ends of the water pipe for about 30 seconds, and then it can be connected.
3. If there are faucets without threads, please use my universal faucet connector. It is recommended to use threaded faucets as much as possible, because there are threads that will not leak water and will not fall off. The rubber faucet joint may leak or fall off due to high water pressure.
Packing List:
1 *Y-shaped connector,
2*Quickly pick
1 *pacifier,
1*40M tubes ,
7 *drip-jet integrated nozzles,
20* Little Red Riding Hoods,
27 *positive tees,
20* ground plug
2 *plugs on the pipe,
1* piece of raw material.