Store Categories
Details
The product supports single channel capacity and internal resistance measurement
Support separate charging and discharging, and support up to 9 charging and discharging cycles in automatic mode
The stop discharge voltage is adjustable in 11 gears
Using DC two-wire method to test internal resistance Chinese English switchable
The maximum charging and discharging current is about 1A
During the charging and discharging process, some components will produce local high temperature. Please ensure that the use environment is open and uncovered. It would be better to increase the fan heat dissipation.
In order to ensure that the battery clip is firm, the 18650 battery holder uses a compact battery holder, which is suitable for flat battery measurement!!!
It does not support charging of lithium iron phosphate battery
Working power supply: DC5V power supply or 18650 battery (self prepared)
Applicable battery: all batteries that meet the requirements of 2.5~3.5V stop discharge voltage and 2.8~4.2V full charge voltage are applicable
Power supply interface: Type-C interface, self provided power supply line (C-port mobile phone line)
System language: Chinese (default), English
Test quantity: 1 circuit charge and discharge measurement (only for the right battery position)
Internal resistance measurement: Yes, DC two-wire method is used to measure the internal resistance
Charging function: support, automatic cut-off charging when fully charged (does not support charging of lithium iron phosphate battery)
Discharge function: support, automatically stop when conditions are met, and the discharge current is not adjustable
Automatic charging and discharging: Yes, the battery is fully charged at the end of automatic mode
Cyclic charging and discharging: supported, adjustable for 1~9 cycles (only supported in automatic mode)
Status prompt: Supported
Stop discharge voltage: 2.5V, 2.6V, 2.7V, 2.8V, 2.9V, 3.0V, 3.1V, 3.2V, 3.3V, 3.4V, 3.5V, 11 adjustable
Discharge current: two circuits of resistance, the maximum current is about 1A, which cannot be adjusted and does not support independent transformation
Charging voltage: controlled by special battery charging chip, the maximum charging voltage is about 1A, and the full charging voltage is 4.2V
Save in case of power failure: save only the setting parameters, not the metering data
Product weight: 80g (net weight) 120g (including packaging)
Product size: 110 × eighty-eight × 30mm
Package size: 153 × one hundred × 42mm
18650 Battery capacity internal resistance tester X1
This is the description of Payment Method.
Do not dismiss your dream.
To be without dream is to be without hope.
To be without hope is to be without purpose.
Do not run through your life so fast that you forget not only where you have been, but also where you are
going.
Life is not race, but a journey to be savored each step of the way.
This is the description of Returns Policy.
Do not dismiss your dream.
To be without dream is to be without hope.
To be without hope is to be without purpose.
Do not run through your life so fast that you forget not only where you have been, but also where you are
going.
Life is not race, but a journey to be savored each step of the way.
Copyright©2017 DataCaciques
Details
The product supports single channel capacity and internal resistance measurement
Support separate charging and discharging, and support up to 9 charging and discharging cycles in automatic mode
The stop discharge voltage is adjustable in 11 gears
Using DC two-wire method to test internal resistance Chinese English switchable
The maximum charging and discharging current is about 1A
During the charging and discharging process, some components will produce local high temperature. Please ensure that the use environment is open and uncovered. It would be better to increase the fan heat dissipation.
In order to ensure that the battery clip is firm, the 18650 battery holder uses a compact battery holder, which is suitable for flat battery measurement!!!
It does not support charging of lithium iron phosphate battery
Working power supply: DC5V power supply or 18650 battery (self prepared)
Applicable battery: all batteries that meet the requirements of 2.5~3.5V stop discharge voltage and 2.8~4.2V full charge voltage are applicable
Power supply interface: Type-C interface, self provided power supply line (C-port mobile phone line)
System language: Chinese (default), English
Test quantity: 1 circuit charge and discharge measurement (only for the right battery position)
Internal resistance measurement: Yes, DC two-wire method is used to measure the internal resistance
Charging function: support, automatic cut-off charging when fully charged (does not support charging of lithium iron phosphate battery)
Discharge function: support, automatically stop when conditions are met, and the discharge current is not adjustable
Automatic charging and discharging: Yes, the battery is fully charged at the end of automatic mode
Cyclic charging and discharging: supported, adjustable for 1~9 cycles (only supported in automatic mode)
Status prompt: Supported
Stop discharge voltage: 2.5V, 2.6V, 2.7V, 2.8V, 2.9V, 3.0V, 3.1V, 3.2V, 3.3V, 3.4V, 3.5V, 11 adjustable
Discharge current: two circuits of resistance, the maximum current is about 1A, which cannot be adjusted and does not support independent transformation
Charging voltage: controlled by special battery charging chip, the maximum charging voltage is about 1A, and the full charging voltage is 4.2V
Save in case of power failure: save only the setting parameters, not the metering data
Product weight: 80g (net weight) 120g (including packaging)
Product size: 110 × eighty-eight × 30mm
Package size: 153 × one hundred × 42mm
18650 Battery capacity internal resistance tester X1
1.We only ship to the confirmed address provided by eBay. please make sure your ebay address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.
2.Orders will be processed instantly and dispatched within 1-2 business days except hoilday, so we do NOT accept any email/message note after you place orders.
3.All package need to wait 30 days,Please take care it.Less than 30 days,we can't take a refund.
1.We accept PayPal payment ONLY, and must be received within 5 days from the date of purchase.
2. It is easy and safe for you to pay by credit cards, debit cards, bank transfers and PayPal account balances.
3.Buyers are responsible for import duties,custom fees and taxes, if any, please check your country.
1.We believe our items are so outstanding. We are convinced you will be happy with your Purchase.
2. If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund or resend the item to you after the returned item arrived at our warehouse.
3. Please include your eBay ID and item number with any email requests.