Advantages of JINGYANG Tempered solar panels:
Multi-layer sheet package, sturdy and durable, good heat dissipation. No hot spots will appear.
The aluminum frame is corrosion resistant and is suitable for both indoor and outdoor use.
With a service life of more than 25 years, it is 3-4 times that of ordinary flexible solar panels. It is the best choice for motorhomes and families. It has a very high cost performance and is the best choice for home energy investment.
Product description:
The surface is tempered glass, waterproof, snowproof, resistant to small hail.
Diodes are pre-installed in junction box and a pair of 24-inches cables with MC4 connectors comes with the panel automatically
The back has 6 drill hole that can be quickly installed.
Model:CNMYPV100(32)M210
Material:Monocrystalline silicon
Maximum Power(Pmax):100W+3%(Maximum 120W)
Maximum Power Voltage(Vmp):18.90V
Maximum Power Current (Imp):5.30A
Open-Circuit Voltage (Voc): 22.7V
Short-Circuit Current (Isc):5.69A
Solar Cell: Newly 210MM*210MM Monocrystalline
Nominal Operating Cell Temp.(NOCT):-45 to 80℃
Maximum System Voltage:DC1000V
Maximum Series Fuse:10A
Dimension:1164*450*30mm
Package Weight:7kg
Package Dimension:1190*480*60mm
(The above data is based on the laboratory standard test environment)
For field connections,use minimun No.12AWG copper wires insulated for a minimum 90℃
Standard Test Conditions:
AM=1.5 IRRADIANCE=1000W/m2 Temp.=25℃
(The size is manually measured and there is a certain error.）
5 Years Warranty, 25 Year Lifetime
Minor reduction in efficiency under partial load conditions at 25degC: at 100 W/m2, 95%- (+/-5%) of the STC efficiency (1000 W/m2) is achieved.
Extra: We keep right to change the specification of the data, and there is about ±5%deviation for all specification, pls notice this point。
Type 1 100W Rigid Solar Panel System
1, Rigid Glass solar panel 100w 18v,1pcs; size: 1165MM*450MM*30MM.
2, 10A, 12V/24V Auto pwm solar charge controller; 1pcs
3, 3M Extension Solar Cable; red and black; 1 set;
4, 3M battery connection cable; 1 set
Type 2: 200W Rigid Solar Panel System
1, Rigid Glass solar panel 100w 18v,2pcs; size: 1165MM*450MM*30MM.
2, 20A, 12V/24V Auto pwm solar charge controller; 1pcs
3, Y type solar cable; female and male; 1 set;
4, 3M Extension Solar Cable; red and black; 1 set;
5, 3M battery connection cable; 1 set
Type 3: 100W Rigid Solar Panel
Rigid Glass solar panel 100w 18v, 1pcs; size: 1165MM*450MM*30MM.
Type 4: 200W Rigid Solar Panel
Rigid Glass solar panel 100w 18v, 2pcs; size: 1165MM*450MM*30MM.
Solar Charge Controller
PWM Solar Controller 12V/24V Auto(SupportLithium iron phosphate battery)
Controller Type is Random, pls notice.
MODEL 10A 20A
Battery Voltage 12V 24V Auto
Charging Current 10A 20A
Discharging Current 10A 10A
Max Solar input: 48V(for 24V battery) 24V(for 12V battery)
Equalization: 14.4V(Sealed) 14.2V(Gel) 14.6V(Flood)
Float charge: 13.7V(defaul,adjustable)
Discharge stop: 10.7V(defaul,adjustable)
Discharge reconnect: 12.6V(defaul,adjustable)
Charge reconnect: 13V
Voltage of open light: Solar Panel 8V(Light lights delay)
Voltage of close light: Solar Panel 8V(Light off delay)
USB output: 5V/3A
Self-consume: <10mA
Operating temperature: -35°C~+60°C
Size: 133.5*70*35mm
*all red color voltage X2 ,while using 24V system.
Connection
1.Connect the battery to the charge regulator - plus and minus.
2.Connect the photovoltaic module to the regulator - plus and minus.
3. Connect the consumer to the charge regulator - plus and minus.
The reverse order applies when deinstalling!
An improper sequence order can damage the controller!Y Type Solar Cable For 2pcs solar panel connection
Rated Voltage: TUV1000V DC/ UL 600V DC
Rated current: 10A~30A
Suitable cable corss sections: 14 AWG~10AWG (2.5MM2,4.0MM2,6.0MM2)
Pin dimension: 4.0MM
Contact material: Copper,tin plated
Housing material: PPO
Degree of protection: IP 67
Flame class: UL94V-0
Compatible Branch Connector:
1. Cable Standard:2.5/4.0/6.0mm sq(14/12/10AWG)
2. TUV UL Standard.
3. 1 pair = 2 pcs =1 pcs female+1 pcs male
4. Delivery time: 48 hours after receiving payment.
3M SOLAR CABLE; RED+BLACK
How To Connect the Solar System
1.Connect the battery to the charge regulator - plus and minus.
2.Connect the photovoltaic module to the regulator - plus and minus.
3. Connect the consumer to the charge regulator - plus and minus.
The reverse order applies when deinstalling!
An improper sequence order can damage the controller!
Advantages of JINGYANG Tempered solar panels:
Multi-layer sheet package, sturdy and durable, good heat dissipation. No hot spots will appear.
The aluminum frame is corrosion resistant and is suitable for both indoor and outdoor use.
With a service life of more than 25 years, it is 3-4 times that of ordinary flexible solar panels. It is the best choice for motorhomes and families. It has a very high cost performance and is the best choice for home energy investment.
Product description:
The surface is tempered glass, waterproof, snowproof, resistant to small hail.
Diodes are pre-installed in junction box and a pair of 24-inches cables with MC4 connectors comes with the panel automatically
The back has 6 drill hole that can be quickly installed.
Model:CNMYPV100(32)M210
Material:Monocrystalline silicon
Maximum Power(Pmax):100W+3%(Maximum 120W)
Maximum Power Voltage(Vmp):18.90V
Maximum Power Current (Imp):5.30A
Open-Circuit Voltage (Voc): 22.7V
Short-Circuit Current (Isc):5.69A
Solar Cell: Newly 210MM*210MM Monocrystalline
Nominal Operating Cell Temp.(NOCT):-45 to 80℃
Maximum System Voltage:DC1000V
Maximum Series Fuse:10A
Dimension:1164*450*30mm
Package Weight:7kg
Package Dimension:1190*480*60mm
(The above data is based on the laboratory standard test environment)
For field connections,use minimun No.12AWG copper wires insulated for a minimum 90℃
Standard Test Conditions:
AM=1.5 IRRADIANCE=1000W/m2 Temp.=25℃
(The size is manually measured and there is a certain error.）
5 Years Warranty, 25 Year Lifetime
Minor reduction in efficiency under partial load conditions at 25degC: at 100 W/m2, 95%- (+/-5%) of the STC efficiency (1000 W/m2) is achieved.
Extra: We keep right to change the specification of the data, and there is about ±5%deviation for all specification, pls notice this point。
Type 1 100W Rigid Solar Panel System
1, Rigid Glass solar panel 100w 18v,1pcs; size: 1165MM*450MM*30MM.
2, 10A, 12V/24V Auto pwm solar charge controller; 1pcs
3, 3M Extension Solar Cable; red and black; 1 set;
4, 3M battery connection cable; 1 set
Type 2: 200W Rigid Solar Panel System
1, Rigid Glass solar panel 100w 18v,2pcs; size: 1165MM*450MM*30MM.
2, 20A, 12V/24V Auto pwm solar charge controller; 1pcs
3, Y type solar cable; female and male; 1 set;
4, 3M Extension Solar Cable; red and black; 1 set;
5, 3M battery connection cable; 1 set
Type 3: 100W Rigid Solar Panel
Rigid Glass solar panel 100w 18v, 1pcs; size: 1165MM*450MM*30MM.
Type 4: 200W Rigid Solar Panel
Rigid Glass solar panel 100w 18v, 2pcs; size: 1165MM*450MM*30MM.
Solar Charge Controller
PWM Solar Controller 12V/24V Auto(SupportLithium iron phosphate battery) Controller Type is Random, pls notice. MODEL 10A 20A Battery Voltage 12V 24V Auto Charging Current 10A 20A Discharging Current 10A 10A Max Solar input: 48V(for 24V battery) 24V(for 12V battery) Equalization: 14.4V(Sealed) 14.2V(Gel) 14.6V(Flood) Float charge: 13.7V(defaul,adjustable) Discharge stop: 10.7V(defaul,adjustable) Discharge reconnect: 12.6V(defaul,adjustable) Charge reconnect: 13V Voltage of open light: Solar Panel 8V(Light lights delay) Voltage of close light: Solar Panel 8V(Light off delay) USB output: 5V/3A Self-consume: <10mA Operating temperature: -35°C~+60°C Size: 133.5*70*35mm *all red color voltage X2 ,while using 24V system. Connection 1.Connect the battery to the charge regulator - plus and minus. 2.Connect the photovoltaic module to the regulator - plus and minus. 3. Connect the consumer to the charge regulator - plus and minus. The reverse order applies when deinstalling! An improper sequence order can damage the controller!Y Type Solar Cable For 2pcs solar panel connection
Rated Voltage: TUV1000V DC/ UL 600V DC Rated current: 10A~30A Suitable cable corss sections: 14 AWG~10AWG (2.5MM2,4.0MM2,6.0MM2) Pin dimension: 4.0MM Contact material: Copper,tin plated Housing material: PPO Degree of protection: IP 67 Flame class: UL94V-0
Compatible Branch Connector:
1. Cable Standard:2.5/4.0/6.0mm sq(14/12/10AWG)
2. TUV UL Standard.
3. 1 pair = 2 pcs =1 pcs female+1 pcs male
4. Delivery time: 48 hours after receiving payment.
3M SOLAR CABLE; RED+BLACK
How To Connect the Solar System
1.Connect the battery to the charge regulator - plus and minus. 2.Connect the photovoltaic module to the regulator - plus and minus. 3. Connect the consumer to the charge regulator - plus and minus. The reverse order applies when deinstalling! An improper sequence order can damage the controller!