Vinyl Wrap Car Auto Vehicle Sticker Decal Film Air Bubble Free
______We do not accept the return for this car film
Specification:
1. Product: Vinyl Wrap
2. Color: Multicolor
3. Size: 18*1.52m/ 1.52*22m/ 1.52*25m
4. Material: High flexible polymeric PVC film
Description:
- Water resistant and weather proof.
- Flexible and Stretchable for concave area.
- Low cost to change the look of your vehicles.
- For best result, professional installation is required; Buyers take responsibility on physical damage during installation such as over heating, over stretching, ripping.
- Easy to fit in most tight spots or corners (primer 94 is required for non sticky surfaces, curves & corners)
- Material has no warranty for fading. Fluorescent Neon colors tend to fade faster than normal colors. Fading can be reduced with over lamination, preventing stretched areas, which fade even faster, and shelter from high U.V. times during the day.
- Material is specially made for vehicle exterior paint surface in good condition. Buyers take self responsibility on unsuccessful result on other usage.
- Always pre-test vinyl installation on vehicles.
- Due to different monitors/calibrations, colors may vary slightly from the pictures.
- This vinyl is designed for vehicle exterior wrap use ONLY. This vinyl won't stick good on polyethylene, polypropylene, ABS, PET/PBT blends, concrete, wood, glass, plastic, textured, aluminum, metal.
- It made of High quality PVC plastic with pre-applied Adhesive on the back
- Help to hide existing scratches and protects from future nicks & scratches from nails, key, jewelery etc.
Precautions after the film：
1. Avoid the use of adhesive tapes with adhesives and other items to paste to the surface of the membrane
2. If you need to use a cleaning agent, you must use a neutral grooved agent for ditch
3. After construction, there is a small bubble. Normal phenomenon has disappeared naturally after 10 to 20 days.
4. Try to dry it in the sun after the film. The light can promote glue viscosity.
5. One week after construction, please ask the appointment time and try to return to the location of the film to do a warranty check
6. At the beginning of the construction of the construction, the adhesion of the film is low. Don't touch it, especially the edges are divided
7. At the beginning of the construction of the construction, if the edge of the membrane is encountered, the construction point should be entered within 24 hours
Renovation
8. After washing the car, it should be carried out after the film is dry (about 3 days). Do not use a water gun to the contact with the film and the paint surface.
injection
9. Due to various reasons such as car washing and wind sand, the small scratches on the surface of the membrane surface will gradually recover smoothly under the sun
2. If you need to use a cleaning agent, you must use a neutral grooved agent for ditch
3. After construction, there is a small bubble. Normal phenomenon has disappeared naturally after 10 to 20 days.
4. Try to dry it in the sun after the film. The light can promote glue viscosity.
5. One week after construction, please ask the appointment time and try to return to the location of the film to do a warranty check
6. At the beginning of the construction of the construction, the adhesion of the film is low. Don't touch it, especially the edges are divided
7. At the beginning of the construction of the construction, if the edge of the membrane is encountered, the construction point should be entered within 24 hours
Renovation
8. After washing the car, it should be carried out after the film is dry (about 3 days). Do not use a water gun to the contact with the film and the paint surface.
injection
9. Due to various reasons such as car washing and wind sand, the small scratches on the surface of the membrane surface will gradually recover smoothly under the sun
