Used: WJ200-002SF, 1/4 HP, 1.6 Amp, 0.2 kW, Constant Torque Sensor-less Vector AC Drive, Input: 200 - 240VAC, Single Phase. The unit has been tested on a motor, and is in perfect working and aesthetic condition. 

Details:

·        Series: WJ200.

·        Horsepower: 0.250 HP.

·        Rating kW: 0.20 kW.

·        Capacity kVA: 0.60 kVA.

·        Input Voltage: 200- 240 V +/- 10% (1P).

·        Input Phase: Single.

·        Input Current: 3.0 A.

·        Output Voltage: 200- 240 V +/- 10% (3P).

·        Output Current: 1.6 A.

·        Product Height: 5.0inches.

·        Product Width: 2.7inches.

·        Product Depth: 4.3inches.

·        Description: 1/4 HP, 1.6 Amp, 0.2 kW, WJ200-002SF, Constant Torque Sensor-less Vector AC Drive, Input: 200 - 240 VAC, Single Phase.

·        Category: Drives.

·        Sub-Category: AC Drives.

·        Sub-Sub-Category: Sensor-less Vector VFD.

·        Enclosure: NEMA1 (IP20).

·        Control Method: Line-to-line sine wave Pulse Width Modulation (PWM) Control.

·        Input Frequency Range: 50-60 Hz.

·        Output Frequency Range: 0.1-400 Hz.

·        VF Characteristics: V/F variable V/F control (constant torque reduced torque) Sensor-less vector control.

·        Overload Current Rating: 150% 60 seconds.

·        Acceleration/Deceleration Time: 0.1- 6000 sec. (linear/curve acceleration/deceleration.) Two stage acceleration/deceleration setting available.

·        Starting Torque: 200% or more.

·        DC Braking: Operating frequency time and braking force variable.

·        Freq Setting Operator Panel: Up (1) and Down (2) keys/value setting keys.

·        Freq Setting Potentiometer: Analog Setting.

·        Freq Setting External Signal: 0 ~ 10 VDC (Input impedance: 10k ohms), 4 ~ 20 mA (Input impedance: 250k ohms), Potentiometer: 1k to 2k ohms variable resistor. The frequency command is the maximum frequency at 9.8V for input voltage 0 - 10 VDC or at 19.6 mA for input current 4 ~ 20 mA.

·        FWD REV START STOP Operator: Run/Stop (Forward/Reverse run change by command).

·        FWD REV START STOP External Signal: Forward RUN/STOP Reverse RUN/STOP.

·        Intelligent Input Terminals: FW (Forward run command), RV (reverse run command), CF1~CF4 (multi-stage speed setting), JG (jogging command), 2CH (2-stage acceleration/deceleration command), FRS (free run stop command), EXT (external trip), USP (USP function), SFT (soft lock).

·        Manufacturer: Hitachi.