Describe
This is a complete set containing multiple tattoo machines and rich tattoo accessories. A large number of single products provide you with sufficient backup to make your tattoo work easier. Designed for you who love tattoos!
Package Contain
1*Tattoo Grip
1*Golden Non-slip Aluminum Tattoo Grips
1* Power Cable
1*Dual Digital Tattoo Power Supply
2*Tattoo Machine
1*Clip Cord Cover
2*Tattoo Machine Cover
1*White Tattoo Practice Skin
4*Tattoo Transfer Paper
1*Tattoo Cups Inks Holder
1*Tattoo Brush
1*Tattoo Clip Cord
1*Tattoo Foot Pedal
1*6 Kinds Of Tattoo Accessories
1*2PC Stainless Steel Tattoo Tips（5R5F）
1*10PC Disposable Needles（5R、5F）
1*10PC Tattoo Needles (5RL、5M1)
1*6PC 20ML Tattoo Ink
2*A Pair of Disposable Gloves
Usage
1) Please check the spring is touching the top of speed contact screw.
2) Please adjust the contact screw to debug.
3) Assemble the handle, use the hexagonal tool to adjust the two screws on the tattoo handle (the size of tattoo tips should match with tattoo needles); eg: if you choose the 5RL tattoo needle, then the tattoo tip you shoud use is 5RT.
4) Put the tattoo needle into the tattoo tube, and the end of the needle is hung on the rubber O-rings.
5) Loose the screw of tattoo grips and contact with tattoo tube.
6) Put the tattoo needle into the tattoo grip, adjust the length of needle or tattoo tube, (The exposed length of the needle is recommended to be 1-2mm).
7) Fix 2-3 rubber bands on the machine for 2 turns. (Note: Please do not exceed 3 turns so as not to add too much pressure on the needle).
8) How to assemble power supply, foot pedal and clip cord. (Notice: make sure the power cable is plugged well)
The tattoo clip cord should hooked on the tattoo machine and the end need to plug in tattoo power supply, the tattoo foot pedal should also plug in the power supply, turn on the power supply, Press the foot pedal, and quick vibrate the needle by adjusting the power button.
Attention
It contains precision parts, please keep it properly. Keep out of reach of children and pets.
Please read the product manual carefully before use.
When not in use for a long time, please disconnect the power supply in time to avoid accidents caused by short circuits.
Before starting the machine, please confirm whether the tattoo handle is firmly fixed to the tattoo machine and tattoo needle to prevent accidents.
The tattoo machine and foot pedal socket of this power supply must be inserted in the correct direction, not reversed, otherwise it will not work; please identify the socket correctly before continuing to use it.
This is a complete set containing multiple tattoo machines and rich tattoo accessories. A large number of single products provide you with sufficient backup to make your tattoo work easier. Designed for you who love tattoos!
Package Contain
1*Tattoo Grip
1*Golden Non-slip Aluminum Tattoo Grips
1* Power Cable
1*Dual Digital Tattoo Power Supply
2*Tattoo Machine
1*Clip Cord Cover
2*Tattoo Machine Cover
1*White Tattoo Practice Skin
4*Tattoo Transfer Paper
1*Tattoo Cups Inks Holder
1*Tattoo Brush
1*Tattoo Clip Cord
1*Tattoo Foot Pedal
1*6 Kinds Of Tattoo Accessories
1*2PC Stainless Steel Tattoo Tips（5R5F）
1*10PC Disposable Needles（5R、5F）
1*10PC Tattoo Needles (5RL、5M1)
1*6PC 20ML Tattoo Ink
2*A Pair of Disposable Gloves
Usage
1) Please check the spring is touching the top of speed contact screw.
2) Please adjust the contact screw to debug.
3) Assemble the handle, use the hexagonal tool to adjust the two screws on the tattoo handle (the size of tattoo tips should match with tattoo needles); eg: if you choose the 5RL tattoo needle, then the tattoo tip you shoud use is 5RT.
4) Put the tattoo needle into the tattoo tube, and the end of the needle is hung on the rubber O-rings.
5) Loose the screw of tattoo grips and contact with tattoo tube.
6) Put the tattoo needle into the tattoo grip, adjust the length of needle or tattoo tube, (The exposed length of the needle is recommended to be 1-2mm).
7) Fix 2-3 rubber bands on the machine for 2 turns. (Note: Please do not exceed 3 turns so as not to add too much pressure on the needle).
8) How to assemble power supply, foot pedal and clip cord. (Notice: make sure the power cable is plugged well)
The tattoo clip cord should hooked on the tattoo machine and the end need to plug in tattoo power supply, the tattoo foot pedal should also plug in the power supply, turn on the power supply, Press the foot pedal, and quick vibrate the needle by adjusting the power button.
Attention
It contains precision parts, please keep it properly. Keep out of reach of children and pets.
Please read the product manual carefully before use.
When not in use for a long time, please disconnect the power supply in time to avoid accidents caused by short circuits.
Before starting the machine, please confirm whether the tattoo handle is firmly fixed to the tattoo machine and tattoo needle to prevent accidents.
The tattoo machine and foot pedal socket of this power supply must be inserted in the correct direction, not reversed, otherwise it will not work; please identify the socket correctly before continuing to use it.
