Project description:
Conditions: 100% brand new
Quantity: 8pcs
Color: bright black
Size: 19.5 * 6 * 4.5cm/7.68 * 2.36 * 1.77inch
There may be deviation in manual measurement
Manufactured in ISO 9001 facilities to ensure good quality
Easy to install, no need to modify, double-sided car tape on the back
Installation method:
1. Clean the installation position with rubbing alcohol before continuing. (Make sure to remove all grease, wax or dust, etc.)
2. Before continuing the installation, please ensure that the product is completely suitable. (Note: Please contact us if you have any questions or the product is unsuitable)
3. Remove the high-strength double-sided adhesive on the back of the board. In the case of relatively low temperature, heat the installation position, and use a hair dryer or hot air gun to heat at a lower setting
4. Carefully place the product at the required position and press it for about 1-2 minutes (Note: Do not wash the car within 24 hours. The adhesive should be cured after 12 hours)
5. Installation completed
addressee:
Because the same car may produce different products in different countries. Please make sure your car parts are as shown in our pictures, otherwise they will not fit. If there are any differences, please contact us before purchasing, thank you!