Store Categories

Portable Handheld Li-ion 18650 Battery Spot Welder Machine 5Gears /Nickel Strip

Details

Product Feature:
Nine level power adjustable, five level power display. Simple, convenient, and powerful
5V charging, more convenient to use
Nickel belt for spot welding machine, one hand grip, easy to use
Charging display, buzzer alarm, more secure
Support 0.1~0.12mm thick nickel sheet, intelligent identification, fully automatic welding, simple and convenient operation
 
Note:
Copper and aluminum surfaces cannot be welded, rusty surfaces cannot be welded, and smooth stainless steel surfaces can be welded normally.
Some batteries have one electrode made of stainless steel and one electrode made of aluminum. Our spot welding machine can weld stainless steel electrodes, while aluminum electrodes require ultrasonic welding. Please note.
Again, aluminum electrodes and copper electrodes cannot be welded.
Common circular batteries such as 1865032650 can be welded. The two needles are stably pressed on the nickel sheet before welding is output. Lift them up and weld again for the next time.
 
instructions
Spot welding nickel sheet
"The battery must be fully charged, and it must be fully charged. The thickness of the spot welded nickel sheet cannot be thicker than 0.12MM.".
2. Pay attention to the pressure during spot welding. The harder you press, the smaller the heat; The lighter the press, the greater the heat; "But if it's too light, it will pierce, and if it's too heavy, it won't stick.". Therefore, it is necessary to apply appropriate force and not press too hard.
3. The battery should be polished to remove the oxide layer and unevenness on the surface. If the welding pen turns black due to oxidation, please polish it with fine sandpaper.
4. Use the tip of the pen to point it firmly.
 
Welding method: Visually weld the head and hold it at a 60 ° angle to the horizontal surface. Both needles are pressed tightly on the surface of the nickel sheet at the same time, resulting in good contact. Current flows from one needle to the other, and a large current melts the nickel sheet, thereby successfully welding the battery and the nickel sheet.
 
Shipping list:
Spot welder X1
Nickel tape X1
Charging line X1


This is the description of Payment Method. 


Do not dismiss your dream.

To be without dream is to be without hope.

To be without hope is to be without purpose.

Do not run through your life so fast that you forget not only where you have been, but also where you are 

going.

Life is not race, but a journey to be savored each step of the way.

This is the description of Returns Policy. 

Do not dismiss your dream.

To be without dream is to be without hope.

To be without hope is to be without purpose.

Do not run through your life so fast that you forget not only where you have been, but also where you are 

going.

Life is not race, but a journey to be savored each step of the way.

Copyright©2017 DataCaciques

Portable Handheld Li-ion 18650 Battery Spot Welder Machine 5Gears /Nickel Strip

Details

Product Feature:
Nine level power adjustable, five level power display. Simple, convenient, and powerful
5V charging, more convenient to use
Nickel belt for spot welding machine, one hand grip, easy to use
Charging display, buzzer alarm, more secure
Support 0.1~0.12mm thick nickel sheet, intelligent identification, fully automatic welding, simple and convenient operation
 
Note:
Copper and aluminum surfaces cannot be welded, rusty surfaces cannot be welded, and smooth stainless steel surfaces can be welded normally.
Some batteries have one electrode made of stainless steel and one electrode made of aluminum. Our spot welding machine can weld stainless steel electrodes, while aluminum electrodes require ultrasonic welding. Please note.
Again, aluminum electrodes and copper electrodes cannot be welded.
Common circular batteries such as 1865032650 can be welded. The two needles are stably pressed on the nickel sheet before welding is output. Lift them up and weld again for the next time.
 
instructions
Spot welding nickel sheet
"The battery must be fully charged, and it must be fully charged. The thickness of the spot welded nickel sheet cannot be thicker than 0.12MM.".
2. Pay attention to the pressure during spot welding. The harder you press, the smaller the heat; The lighter the press, the greater the heat; "But if it's too light, it will pierce, and if it's too heavy, it won't stick.". Therefore, it is necessary to apply appropriate force and not press too hard.
3. The battery should be polished to remove the oxide layer and unevenness on the surface. If the welding pen turns black due to oxidation, please polish it with fine sandpaper.
4. Use the tip of the pen to point it firmly.
 
Welding method: Visually weld the head and hold it at a 60 ° angle to the horizontal surface. Both needles are pressed tightly on the surface of the nickel sheet at the same time, resulting in good contact. Current flows from one needle to the other, and a large current melts the nickel sheet, thereby successfully welding the battery and the nickel sheet.
 
Shipping list:
Spot welder X1
Nickel tape X1
Charging line X1

1.We only ship to the confirmed address provided by eBay. please make sure your ebay address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.

2.Orders will be processed instantly and dispatched within 1-2 business days except hoilday, so we do NOT accept any email/message note after you place orders.

3.All package need to wait 30 days,Please take care it.Less than 30 days,we can't take a refund.

1.We accept PayPal payment ONLY, and must be received within 5 days from the date of purchase.

2. It is easy and safe for you to pay by credit cards, debit cards, bank transfers and PayPal account balances.

3.Buyers are responsible for import duties,custom fees and taxes, if any, please check your country.

1.We believe our items are so outstanding. We are convinced you will be happy with your Purchase.

2. If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund or resend the item to you after the returned item arrived at our warehouse.

3. Please include your eBay ID and item number with any email requests.

DataCaciques