Condition: AN OPEN BOX ITEM

Warranty: 1 YEAR AUDIOSAVINGS

Description of MBQR-POD-2:

Polaris RZR Tuned Audio Package: 400 Watt STAGE 2 Audio System includes 8 Inch 2 Way Compression Horn Speakers lower right & left speaker pods for 8 inch speakers, easy installation template.

Works on all Polaris RZR 2014-Current models.

• Purposely Engineered TUNED AUDIO for Polaris RZR 2014-Current
• High SPL 8 inch compression horn speakers make 30% louder than standard coaxials
• High Impact HDPE Composite Enclosures RZR specific left and right kick panel enclosures, ultra compact design takes up minimal space
• LIFEShield IPX Rated fully protected against the elements

Features of MBQR-POD-2:

Compatible Vehicle Fitment:

• Polaris RZR 2014-Current

Marine Grade Protection/IPX Rating:

• IPX67

Speaker Features:

• Marine grade protection: LIFE SHIELD - Protectect for water and dirt. UV protected against sun fade.
• Tweeter dome material: 1 Inch Pure Titanium Compression Diaphram - Very smooth musical response, with very high output with minimal required amplifier power
  
• Compression horn: Coincident Mounted Compression Horn - Overall volume is improved as much as +5dB over conventional speakers, Wavelength Transparent Acoustic Lens improves midrange frequencies through the cone
  
• Surround: Natural Butyl Rubber - Remains musical in all weather. Does not stiffen in cold.
  
• Cone: 8 inch Composite Poly Cone - Water resistant composite polypropylene cone with temperature stable Butyl rubber surround mounted on a lightweight composite frame
  
• Voice coil former: High Temperature Voice Coil and Former - Voice coil is high temperature copper, wound on a Kapton former which allows the voice coil to handle more power while remaining light in weight.
  
• Spider: Water resistant spider - Woven fiber composite spider to stabilize the cone and voice coil in all musical situations.
  
• Cooling system: Front and Rear Venting - Air passes through the spider and back plate to exchange air over the voice coil.
  
• Crossover type: 12dB Butterworth - Smooth transition from high to lower frequencies remain musicial and not harsh or distorted
  
• Frame:Composite ABS and glass fiber frame - Composites add strenth to the frame without adding distortions or harmonics that can affect the tonal quality of the speaker
  
• Motor: High Energy Y30 Motor assembly - High energy strontium ferrite magnet for higher output with minimal amplifier power
  
• Grills: Composite - UV treated against sun fade and waterproof
• Marine certified: YES - Longer life against harsh conditions. Protected against sun fade with UVA paint coating. Conformal coated crossover components protect against fresh and salt water spray as well as dust and sand.
  
• IPX67: YES - Tested to the highest Marine and Motorsports standards for resisting the elements
  
• Tweeter materiaL: Titanium Dome Tweeter - Very smooth musical response, high output with minimal required amplifier power
  
• Marine certified crossover: Marine Certified Crossover - Conformal Coated, Butterworth 12dB per octave crossover with PTC (Positive Thermal Coefficient) tweeter protection
  
• Dimensions: 22.6 x 13.5 x 16.75 in

Features of NA2-400.2:

• MB QUART NA2 400.2 400w 2-Channel Amplifier Amp For Polaris/ATV/UTV/RZR/CART
• Marine Grade Protection: Yes - Amplifiers are ABYC & ASTM certified which defines that marine amplifiers must use conformal coated PC boards to resist corrosion from salt spray & moisture.
• Pre-Amp Circuitry: Q-Stasis Pre Amplifier Stage - The highly engineered Q-Stasis pre-amplifier stage reduces incoming noise from source units dramatically improving sound quality
• Inputs: 1 Pair, RCA Nickel-Plated - High temperature impact resistant with hex screw terminals that allow for secure connections and is erosion resistant
• Operation Mode: Two channel operation - Flexible installation allows this amplifier to run in two channel or bridged mono mode.
• Crossover / Signal Shaping: Switched FULL / LPF / HPF - Complete control of amplifier signal, essential when using two or more amplifiers
• Class / Topology: Full Range Class D - Highly efficient circuit topology which helps the amplifer develop a lot of power in a very small heatsink.
• Output Devices Technology: PWM MOSFET Power Supply - Stable power through the PC board with minimal heat generation
• Heat Sink: Aluminum - Quickly dissapates heat to allow the amplifer to run lower impedance for longer duration
• Power Supply: Simpatico Coil Design - The dual coil Pulse Width Modulated power supply keeps voltage constant through the Ultra-Fi output devices
• Output Connections: Quick Dissconect Wires, RCA Connections - Quickly remove amplifer when you are putting machine up for the winter of as a security precaution
• Connections Type: Gold-plated connections - Gold-plated power, ground, speaker and RCA corrosion resistant connections
• Diagnostics: Three-stage protection circuits - Monitor thermal, overload, DC, and speaker short protection with lighted indicators on the amplifier end panel
• Marinized / Waterproof: Yes - Water resistant for durability in any environment

Specifications:

• Class: Full Range Class D
• Variable Voltage: 0.2V~9V
• Signal to Noise Ratio: >90dB
• Frequency Response: 20Hz-20kHz
• Crossover Type: Electronic 12dB Per Octave
• Low Pass Crossover: Switch Low Pass 300 Hz
• Bass Boost: 0-12dB@45Hz
• Subsonic Filter: 60Hz
• Power @ 2-Ohms: 2 x 200W
• Power @ 4-Ohms: 2 x 100W
• Total Channels: 2
• Audio Inputs: RCA
• Power Terminal 12v/GND: Molex 10 ga
• Speaker Terminal Wire Gauge: Molex Plug Connector
• Fusing: 1 x 30 Amps
• Certifications: Marine & Powersports
• Dimensions: 3.70 X 5.51 X 1.77 in (9.4 X 14.0 X 4.5 cm)
• Weight: 2.12 lbs (0.96 kg)

Mount/Harness:

•  Plug and Play Harness. Waterproof Connectors with pre-measured wires. No guesswork and no installation mistakes.

Time and Tools:

• Standard hand tools are required. See the manual for time on each of the different components.

Harnessing:

• Full system harness capable of accommodating BT controller, 1 amplifier, which power 2 speakers

Accessories:

• MBQR-ACC-1: RZR Radio and Dual Amplifier Harness is included with the system

Fit Guide of MBQR-POD-2:

• 2013-2020 Polaris RZR XP/XP4 1000
• 2014-2020 Polaris RZR XP/XP4 Turbo
• 2018.5 – 2020 Polaris RZR Turbo S/Turbo S4
• 2014-2020 Polaris RZR 900/900S/1000S
• 2014-2018 Polaris RZR S4 900
• 2019-2020 Polaris RZR S4 1000

AudioSavings Return Policy:

At Audiosavings, we strongly believe in customer satisfaction and therefore offer free return shipping within 30 days of purchase on all items returned to us within the continental USA.

Prior to returning merchandise, contact us and we will give you a return authorization # and a return label.

You may return this item for a refund within 30 DAYS of purchase.

Warranty Repair/Exchange Period: 1 YEAR

If your item is defective or you want to return it for any reason within the first 30 days of when it was delivered to you; you have the following options:

• We will send you a pre-paid shipping label to replace the item for a brand new one.
• We will send you a pre-paid shipping label to exchange the item for another item of your choice. If the item you chose is more or less money we will work out the price difference with you.
• If you are returning a working item in used condition for a refund there will be a 20% used item fee deducted from your refund. All replacements and exchanges are free.

Replacement/Processing Time:

Your replacement or refund will process within 3-5 business days of when we receive the item.

Please note items with physical damage un-related to shipping are not covered under warranty. Registered software cannot be returned.

You MUST notify us within 48 hours if you receive an item that was damaged during shipping.

Process for returning items

Please email us with your eBay user ID, Item code / model #, Condition of the item, and the reason for your return. Please also indicate whether you would like a replacement, an exchange, or a refund. We will supply you with a reference number (RMA #) to put on the package which will ensure quick processing of your return. All returns require a RMA# to be returned back to our facility.