Laser Engrave Enclosure

[Great Compatibility]:Comgrow M laser engraver protective cover has a super space, 700*700*500mm,27.5*27.5*19.6inches.It's fit for Comgrow Z1, Ortur Laser Master 3 2/2 Pro,Sculpfun S9,xTool D1/D1 Pro,ATOMSTACK A5/A5 Pro/A5 M40/A5 M30, Twotrees Totem 2.5/Totem 5.5/Totem S, etc.

[Convenient Design]:1. The laser enclosure is equipped with additional cable openings on the left and right side, so that cables for laser engraving or cables for air assist can pass through more easily. 2.The fume extractor 4-inch connector is added on the left and right sides, so you can choose whether to put the smoke absorber on the left or the right side according to your carving site.

[With light and Top Support Pole]:This tent is equipped with a USB light. When the zipper is fully closed, the tent does not transmit light, so the inside of the tent is dark, and with the light, you can see more clearly when laser engraving. And with the additional adjustable position of the light pole at the top, the top of the laser enclosure is less likely to collapse compared to the Comgrow Small, thus making the engraving work smoother.

[Enclosure Advantage]:Sound insulation and dustproof. The cover can effectively block the noise emitted by the engraver during laser engraving, create a comfortable engraving environment. It can also be used as a dust cover to prevent the engraver from being covered by dust and is easy to store. Simply wipe it with a damp cloth when cleaning. Protects laser engraver from damage and helps contain stray fumes.

[Two sizes of Window front Pipe]: Users can choose the proper size of the front arm, short Window front Pipefor larger laser engraving machine and engraving material is convenient to take into the laser shield, long Window Pipe front for the window does not collapse, according to your preference to choose

Smoke Absorber

[Super Strong 3 Stage furification]-The Comgrow smoke absorber has a 3 stage filter.The first layer of high-density filter will initially trap large particels such as dust and debris,and the second layer of High Efficiency H18-Grade HEPA Filter remove at least 99.97% of particles with a size of 0.3 microns (um),the third layer Activated Carbon Filter remove VOCs,odor like cigarette smeel
[Adjustable knob] At 0-30, the fan speed of the smoke purifier changes obviously, at 30, the fan speed has reached 6500 RPM.At 30-100, the fan speed of the smoke purifier is 6500±10% RPM, so the difference is not significant.We will change the knob afterwards to make the difference of speed regulation more
[High suction fan]-The solder fume extractor has higher rotational speed, up to 7000RPM, air volume 52CFM.High Cadr 85m³/h,Refresh air of 355 ft2 room:1.3X Per Hour.High purification rate allow you to breathe fresh air again and protect your respiratory tract and lungs. REMEMBER to keep the fume extractor close to you work to ensure the fume be absorbed completely.
[23 Inch Tube Telescopic]- The smoke absorber tube can change direction 360 degrees at will, it can also be stretched and compressed. Bend the tube to the direction of your project, regardless of which direction you are working on
[Perfect combination] - The laser protective cover can prevent the diffusion of smoke and odor generated during the laser engraving process. When the smoke extractor is connected with the protective cover, it can absorb all the smoke in the cover, which is more conducive to you to see the engraving process. It is a perfect match that no other brand has.
[Multiple Application Scenarios] - This fume evacuator can be used for soldering, laser engraver, DIY process, electronics repair. If you have any questions, please contact us, Comgrow's professional technical team will reply you 24 hours.