5V 2Channel

 

Module description:

1. Maximum load on normally open pin: AC 250V/10A, DC 30V/10A.
2. Trigger current 5mA;
3. Module can be set high level or low level trigger by jumper wire;
4. Power indicator light (green), relay status indicator light (red);
5. Module size: 50mm*41mm*18.5mm.

 

Module interface specifications:

1. DC+ : DC power supply positive pole
2. DC- : DC power supply negative pole
3. IN1 : channel 1 signal triggering pin
4. IN2 : channel 2 signal triggering pin

 

Relay output:

1. Normally closed pin (NC1) : channel 1 relay normally closed pin
2. Common pin (COM1) : channel 1 relay common pin
3. Normally opened pin (NO1) : channel 1 relay normally opened pin
4. Normally closed pin (NC2) : channel 2 relay normally closed pin
5. Common pin (COM2) : channel 2 relay common pin
6. Normally opened pin (NO2) : channel 2 relay normally opened pin

 

High or low level trigger option:

1. S1:It is option switch for channel 1 relay;
2. S2:It is option switch for channel 2 relay;
3. It is low level triger if COM pin connect to LOW pin; It is high level triger if COM connect to High.

 

 

 

5V 4Channel

 

Module description:

1. Maximum load on normally open pin: AC 250V/10A, DC 30V/10A.
2. Trigger current 5mA;
3. Module can be set high level or low level trigger by jumper wire;
4. Power indicator light (green), relay status indicator light (red);
5. Module size: 73mm * 50mm* 18.5mm.

 

Module interface specifications:

1. DC+ : DC power supply positive pole
2. DC- : DC power supply negative pole
3. IN1~IN4 : relay signal triggering pin

 

Relay output:

1. Normally closed pin (NC1~NC4) : relay normally closed pin
2. Common pin (COM1~COM4) : relay common pin
3. Normally opened pin (NO1~NO4) : relay normally opened pin

 

High or low level trigger option:

1. S1~S4:They are option switch for relay 1~4;
2. It is low level triger if COM pin connect to LOW pin; It is high level triger if COM connect to High.

 

 

 

5V 8Channel

 

Module description:

1. Maximum load on normally open pin: AC 250V/10A, DC 30V/10A.
2. Trigger current 5mA;
3. Power indicator light (green), relay status indicator light (red);
4. Module size: 141.5mm * 50mm* 18.5mm.

 

Module interface specifications:

1. DC+ : DC power supply positive pole
2. DC- : DC power supply negative pole
3. IN1~IN8 : relay signal triggering pin

 

Relay output:

1. Normally closed pin (NC1~NC8) : relay normally closed pin
2. Common pin (COM1~COM8) : relay common pin
3. Normally opened pin (NO1~NO8) : relay normally opened pin

 

High or low level trigger option:

1. S1~S8:They are option switch for relay 1~8;
2. It is low level triger if COM pin connect to LOW pin; It is high level triger if COM connect to High.

 

 

 

9V 2 Channel

 

Product Name: Optocoupler Driver Relay Module

Relay Type: SRD-09VDC-SL-C

Coil Voltage: DC 9V

Pole Number: 2 Channel

Load: 10A, AC 250V/125V, DC 30V/28V

Overall Size: 5 x 4.1 x 1.8cm/2" x 1.6" x 0.7"(L*W*H)

Materials Meta: Plastic, Electric Parts

Main Color: Red

 

 

 

9V 4 Channel

 

Product Name: Optocoupler Driver Relay Module

Relay Type: SRD-09VDC-SL-C

Coil Voltage: DC 9V

Pole Number: 4 Channel

Load: 10A, AC 250V/125V, DC 30V/28V

Overall Size: 7.3 x 5 x 1.8cm/2.9" x 2" x 0.7"(L*W*H)

Materials Metal: Plastic, Electric Parts

Main Color: Red

 

 

 

9V 8Channel

 

Module description:

1. Maximum load on normally open pin: AC 250V/10A, DC 30V/10A.
2. Trigger current 5mA;
3. Power indicator light (green), relay status indicator light (red);
4. Module size: 141.5mm * 50mm* 18.5mm.

 

Module interface specifications:

1. DC+ : DC power supply positive pole
2. DC- : DC power supply negative pole
3. IN1~IN8 : relay signal triggering pin

 

Relay output:

1. Normally closed pin (NC1~NC8) : relay normally closed pin
2. Common pin (COM1~COM8) : relay common pin
3. Normally opened pin (NO1~NO8) : relay normally opened pin

 

High or low level trigger option:

1. S1~S8:They are option switch for relay 1~8;
2. It is low level triger if COM pin connect to LOW pin; It is high level triger if COM connect to High

 

 

 

12V 2 Channel

 

Module size: 50mm*41mm*18.5mm.

Module interface specifications:

1. DC+ : DC power supply positive pole
2. DC- : DC power supply negative pole
3. IN1 : channel 1 signal triggering pin
4. IN2 : channel 2 signal triggering pin

Relay output:

1. Normally closed pin (NC1) : channel 1 relay normally closed pin
2. Common pin (COM1) : channel 1 relay common pin
3. Normally opened pin (NO1) : channel 1 relay normally opened pin
4. Normally closed pin (NC2) : channel 2 relay normally closed pin
5. Common pin (COM2) : channel 2 relay common pin
6. Normally opened pin (NO2) : channel 2 relay normally opened pin

 

 

 

12V 4 Channel

 

Size: 73mm * 50mm * 18.5mm ( L * W * H )

four mounting bolts holes , hole 3.1mm, 67mm * 44.5mm pitch

Interface :

1. DC +: positive power supply ( voltage required by the relay , there 5V.9V.12V and 24V choice )
2. DC-: negative power connection
3. IN1-IN4: each way based on the settings , can be high or low to control the corresponding relay

outputs :

a 12- line interface, the interface can be directly connected to all leads , user-friendly

1. NO1 - NO4: normally open relay interfaces , relay before the vacant after the pull shorted with COM
2. COM1 - COM4 Common Interface Relays
3. NC1 - NC4: normally closed relay interface relay shorted with COM ago , after the pull- vacant

 

 

 

24V 2 Channel

 

Module size : 50mm * 41mm * 18.5mm ( L * W * H )

four mounting bolts holes , hole 3.1mm, 44.5mm * 35.5mm pitch

Interface :

1. DC +: positive power supply ( voltage required by the relay , there 5V.9V.12V and 24V choice )
2. DC-: negative power connection
3. IN1: 1 channel signal to trigger the end , you can set a high or low level control relay
4. IN2: 2 -channel signal to trigger the end , you can set a high or low level control relay

Outputs :

1. NO1: After a relay normally open interfaces , relay before floating, shorted pull with COM1
2. COM1: 1 relay common interface
3. NC1: 1 relay normally closed port, COM1 relay shorted before and after the pull- vacant
4. NO2: 2 -way normally open relay interface, the relay before floating , pull back and COM2 short
5. COM2: 2 Common Interface relay
6. NC2: 2 -way normally closed relay interface relay short front and COM2 , pull vacant post

 

 

 

24V 4 Channel

 

Module size : 73mm * 50mm * 18.5mm ( L * W * H )

four mounting bolts holes , hole 3.1mm, 67mm * 44.5mm pitch

Interface :

1. DC +: positive power supply ( voltage required by the relay has 24V option)
2. DC-: negative power connection
3. IN1-IN4: each way based on the settings , can be high or low to control the corresponding relay

Outputs :

12- line interface, the interface can be directly connected to all leads , user-friendly

1. NO1 - NO4: normally open relay interfaces , relay before the vacant after the pull horted with COM
2. COM1 - COM4 Common Interface Relays
3. NC1 - NC4: normally closed relay interface relay shorted with COM ago , after the pull- vacant

 

 

 

24V 8Channel

 

Module description:

1. Maximum load on normally open pin: AC 250V/10A, DC 30V/10A.
2. Trigger current 5mA;
3. Power indicator light (green), relay status indicator light (red);
4. Module size: 141.5mm * 50mm* 18.5mm.

 

Module interface specifications:

1. DC+ : DC power supply positive pole
2. DC- : DC power supply negative pole
3. IN1~IN8 : relay signal triggering pin

 

Relay output:

1. Normally closed pin (NC1~NC8) : relay normally closed pin
2. Common pin (COM1~COM8) : relay common pin
3. Normally opened pin (NO1~NO8) : relay normally opened pin

 

High or low level trigger option:

1. S1~S8:They are option switch for relay 1~8;
2. It is low level triger if COM pin connect to LOW pin; It is high level triger if COM connect to High.