SKU | 303-1557+303-3623 |
---|---|
MFG SKU # | 303-1557+303-3623 |
BRAND | Aventor |
MAXIMUM MEASURING RANGE | 1", 6", 25mm, 150mm |
RESOLUTION | 0.0005"/0.01mm, 0.00005"/0.001mm |
DATA INTERFACE | Yes |
ACCURACY | ±0.0015"/0.03mm, ±0.00015"/0.003mm |
BACK TO THE DRAWING BOARD What started as a mere pencil sketch on a sheet of scratch paper has grown into a thrilling adventure in design and engineering. Inspired by stealth air planes, the concept was born and so we struck out to create a caliper to match. |
|
MORE THAN A PRETTY FACE In order to achieve the delicate balance between design and functionality, we spent hundreds of hours reworking and revising the decal artwork, the impact resistant case, the body, and the internal electrical components. On the decal artwork, we went for easy to read and eye-catching with our vibrant red and white on a glossy black background. For the plastic cover, we blended function and flair without taking our eyes off of ergonomics by always putting the caliper back in our hands to make sure the feel was just right. |
|
PICK IT UP AND MEASURE By pressing and hold the ON/OFF key for 3 seconds, the caliper will memorize the current position as the 0 position even when waking up from power off mode, so operators no longer have to set the zero point every time they turn the caliper on. |
|
BACK TO THE DRAWING BOARD What started as a mere pencil sketch on a sheet of scratch paper has grown into a thrilling adventure in design and engineering. The Aventor micrometer was designed with the human aspect in mind. Sleek style, comfort and accuracy along with durability, make’s this tool an outstanding addition to your tool checklist. |
|
MORE THAN A PRETTY FACE First, we modeled the design to eliminate hand fatigue with a contoured body that fits like a glove. Crisp, clear, easy-to-read LCD display, accurate to .00015"/0.003mm and is easy on the eyes too. We also added the capability of connecting direct to your computer, eliminating secondary data input. The spine of the grip also features a non-slip surface to eliminate accidental drops.
|
|
PICK IT UP AND MEASURE Splish splash, no leaks here! IP65 complete splash protection from water, coolant, dust, oil and other non-corrosive materials, without the worry of damaging the tool. |
Integrated CircuitrySignificantly improves reliability, prevents dead chip occurrences, and can be operated 10,000 hours continuously without failure |
Guide WayGuide way surface is lapped in the direction of the slider movement, this minor detail produces an even and smooth run of the slide |
Outside JawMeasuring contact face on the outside jaw are precision ground and lapped to give it a mirror finished, and hardened to 53 HRc |
Mirror FinishedCarbide tipped measuring face is precision ground and micro lapped to give a mirror finished with 0.3um / 0.000012" flatness |
Knurling PatternEnhanced grip by integrating cross knurling pattern into the plastic mold on the side and bottom surface of the frame |
Ratchet StopSpring loaded ratchet mechanism applies constant clicking force to workplace to ensure repeatable measurement |
TestimonialLarry S. from Oshkosh, WI |
|||||||||||||||||||||||||
Caliper Dimension
|
|||||||||||||||||||||||||
IP65 Protection LevelCoolant Proof IP65 protection level means the micrometer is dust tight and protected against water jet. In our laboratory test we would apply water jets under standardize pressure condition for 30 minutes. Designed to work in adverse condition exposed to coolant, water, dust, or oil, even if the caliper is splashed with coolant or water, there is no need to wipe or clean the spindle. Anti-corrosion treatment is required after exposing to water or coolant environment. |
|||||||||||||||||||||||||
Micrometer Dimension
|
What's Included
Related Products
SKU: 303-1025 | SKU: 303-1023 | SKU: 303-1022 |
Depth Base Attachment for 6" 8" 12" Aventor Digital Caliper | Centerline Gage Attachment for 4", 6", 8" Caliper | Caliper Accessory Kit |
SKU: 303-2640 | SKU: 303-3597 | SKU: 303-9390 |
Micrometer Stand | SPC Date Interface Kit for Aventor Caliper Indicator | 48-3 TPI Thread Pitch Diameter Measuring Wire Attachment System |
We have other calipers available at My Ebay Store:
SHIPPING: UPS Ground
Buyer pays ACTUAL UPS shipping & insurance, and a $3.00 handling fee for this item to be shipped to all states within the continental United States. Hawaii, Alaska & and other United States Territories will ship via UPS BLUE. Canada will pay actual shipping costs plus duty fees via UPS.
We can combine other auctions or store items to save on shipping. You may ask for freight cost before buying tools. Shipment will be made the same day as your payment is received and an UPS tracking number will be email to you. If your order is being shipped to an address outside of the United States, local consumer tax and/or customs duty , brokerage charges may apply and the package's recipient may need to pay these to clear customs.
We accept VISA, MasterCard and E-Check on PayPal.com
Illinois resident adds 8% sales tax.
If the item stated as brand new is found defective on arrival or incorrect item was shipped, buyer understands that the product will be repaired or replaced at seller's discretion, and be given a reasonable amount of time. Buyer is responsible for return shipping costs and insurance. Warranties are offered by the manufacturer and will be honored by the manufacturer. All shipping and handling fees will not be returned in any case.