1PCS
12V 24V 36V 48V Bidirectional Brushed ESC Electric Speed Controller
3S-13S High Voltage ESC for RC Crawler Tank Boat Model Toy Parts
Tips:
- For RC crawler tank model car or
differential 4WD car or DIY boat modified, which should be used with 2 pieces
ESC.
- The limit voltage is 60V; do not try to
use 60V, it is recommended to leave a margin of more than 5V.
- You can brake by hitting a little
direction. If you hit the opposite direction directly, you can brake directly
and output in the reverse direction.
- Input voltage: DC10V-60V (3S-13S li-po
battery)
- UBEC: 5V 0.5A (Powering the receiver and
servo)
- Max. Current: 120A (the speed of forward
and reverse is the same as the current)
- Weight: about 285 grams
- Signal line: line length is about 30CM
- Distribution connector: XT90 plug
connector
- Size: 10.5CM*7CM*3.3CM
After the ESC is energized, the indicator
light flashes and flashes again. After the remote control stroke is set, the
indicator light flashes.
The indicator flashes rapidly after the
signal is lost.
After the stroke of the remote controller
reaches the maximum, the ESC power-on indicator lights up and then flashes,
then inserts the signal into the corresponding channel of the receiver.
Wait a few seconds for the indicator to
flash twice, then the remote control stroke is centered and the indicator
flashes three times.
1pcs x ESC
Tips:
- Please
allow slightly measuring deviation due to manual measurement.
- Due to
unavoidable factors such as monitor, shooting angle, light source, etc, the
color in the picture may have color difference with the goods you receive.
Everything is subject to the goods you receive.