Description

 

5.1 Audio System 5.1CH Audio Decoder USB DAC HDMI Power Amplifier Power Amp 450W Total Output Power

Features:
- 75W for each channel, 4/6/8 ohm speakers can be used, and the total power is 450W
- Professional DSP audio processing chip
- Support a variety of audio interface inputs, HDMIX3+ARC/optical/coaxial/AUX, USB interface and Bluetooth 5.0 receiver
- Supports hard decoding and software decoding
- Support source devices such as Blu-ray player, for PS, computer, set-top box and network player
- DTS/AC3 5.1 source code digital audio outputs analog 6-channel audio or stereo audio through DSP hard decoding
- Analog AUX signals or PCM2.0 signals are software decoded by digital processing chips to analog 5.1-channel or stereo outputs
- Its panel supports LCD display and total volume adjustment; switch signal sources by pressing buttons
- Support 1CH digital coaxial input, 1CH digital optical input, 3CH HDMI inputs, 1CH ARC, 1CH AUX stereo input, 1CH Bluetooth input and 1CH USB 2.0 interface input. Different sources can be switched.
- Support 1CH HDMI output and 1CH optical output (no output in USB and Bluetooth AUX mode)
- Compatible with Bluetooth playback devices due to Bluetooth 5.0 transmission
- It adopts 24BIT192KHz audio DSP and 24BIT/192KHz DAC 6-channel chip
- Support for Dolby Digital AC3, DTS, PCM, HDCD, Dolby Prologic II, WAV, FLAC, APE and other lossless audio decoding
- USB supports WAV, APE, FLAC, MP3, DTS and other 5.1 lossless audio playing. It supports a U disk up to 128G at FAT32 format
- High quality audio, low noise and mute function for power-on and power-down to protect loudspeaker boxes
- Remote control: one button to switch input sources and easy to operate. Panel button cycle switching and knob to adjust the volume
- LCD screen can display song names, playing progress, playing mode, volume and output mode
- HDMI input and output support HDMI 1.4 version. The maximum resolution is 4Kx2K at 30HZ
- All-aluminum brushed panel and black shell with high-end appearance
- Power-off memory function. After rebooting, it automatically switches to the last used signal channel

Technical Parameters:
- Supported digital audio decoding format: for Dolby Digital AC3/DTS/PCM
- USB playback audio formats: MP3, WMA, APE, FLAC, WAV, DTS and AC3
- HDMI input and output maximum resolution: 4Kx2K at 30HZ. Support 3D, built-in 5.1 audio EDID
- DSP frequency: 32-192KHZ
- DSP bit stream: 16-24Bit
- Digital input level: 0.2-1Vp-p
- Power amplifier SNR (CCIR/ARM): 80dB
- Frequency response: 20Hz~20KHz
- Maximum output power: front left and right / surround left and right: 75W at 4 OHM; Center/bass 75W at 4 OHM
- THD: <1%
- Working temperature: -40 to +80°C
- Working humidity: 5~90%RH
- Dimensions: 21.7 x 24 x 7.7cm/8.5 x 9.4 x 3" (LxWxH)
- Product net weight: 1KG/2.2LB
- Multiple input interfaces: HDMIX3+ARC, optical, coaxial, USB 2.0, Bluetooth 5.0, 2/6 channel speaker output and digital audio optical output (except USB Bluetooth and AUX input, there is output in other input modes)
- Resolution: 105DB
- Formats: Support lossless audio decoding formats such as for Dolby Digital AC3, DTS, PCM, HDCD, Dolby Prologic II, WAV, FLAC and APE

Package Included:
- 1 x Main unit
- 1 x Power Adapter
- 1 x Optical Cable
- 1 x IR Remote Control
- 1 x Coaxial Cable
- 1 x HDMI Cable
- 1 x Bluetooth Antenna
- 1 x User Manual

Note:
- 2pcs 1.5V AA batteries for the remote control are not included.