🐠【Easy to Install】The aquarium auto top off system is extremely to install and maintain. Easily install on terrarium with a wall thickness of no more than 5/8 inches (16 mm). The range from the top of the tank to the water level is 0-6.7 inches (0-17 cm). The durable PC material adjustable bracket can be fixed in the terrarium according to different water levels.
🌿【Integrated Design Without Setting】Plug and play, easy operation. Anti-overflow protection design and will automatically cut off power when water level is too high.
💧【Double Protection】Accurate dual-float water level sensor can provide over-filling protection. When the water level drops below the lowest water level, the power supply will be activated and the water pump will work automatically and shut down when the water level reaches the highest water level. When the first float fails, the second float will work.
🐚【Relay Control】The controller of the ato system integrates a relay and a stable circuit to protect the water pump and the water level switch more effectively.
🦐【Widely Applications】It is widely used in various aquariums, sump, fish tanks, coral reef tanks, etc. Rest assured your product is covered by one-year .

Product Description

The Reason to Choose DIGITEN ATO

The ATO system uses a double float water level switch (like "two eyes") to double monitor and protect the fish tank water level.

The controller integrates a relay and a stable circuit to protect the water pump and the water level switch more effectively.

The mounting holder is very firm, which can freely adjust the water level up and down, and it will not cause the water level switch to misjudge, no matter the swimming fish, water plants and so on.

The whole system is very easy to install, saving a lot of tedious work for DIY.

The stable system saves you from worrying about overflow when you go out!

We believe it's the perfect ATO for your aquarium!

Package Included

1 x Holder and Parts
1 x Dual Float Sensor
1 x Pump
1 x Power Adapter
1 x Splitter Controller
1 x 6*9MM Silicone Hose
1 x User Manual

Smart Auto Top Off System

Automated Filling
Overfill Prevention
Easy to Use

* Make sure the water level is higher than the pump, to prevent pumps from running dry and failing.

* Make sure all cables are plugged into the hole fully.

Pump Rated Voltage: 12VDC

Pump Max Power: 5W

Rated current: 0.5A

Pump Waterproof Grade: IP68

Pump Max Lift: 0.4-1.5m

Pump Max Flow Rate: 200L/H

Pump Noises: < 40db

Dual Float Sensor Cable Length: 1m (3.28ft)

Power Adapter Input: 100-240VAC

Power Adapter Output: 12VDC, 1A

Power Adapter Cord Length: 1m (3.28ft)