eBay

PCONNECTORS TYPE - 6RJ11 6P4C to RJ45 8P8C Connector Plug telephone Cable ; Length: 1 meter / 3.3 feet.
QUALITY ASSURANCE – The telephone cables coming into house and inside wall panel are Ethernet, but the wall jacks are standard phone cables. To use DSL service,needed to convert the incoming signal from Ethernet down to a telephone jack.
Allow you use one end of cable(RJ11,6P4C) to connect the ADSL Splitter , so that can be installed between analog devices(such as telephones or analog modems) and a plain old telephone service (POTS) line.with their existing telephone (POTS) device,Also can be used for fax machines, answering machines.
Note:The RJ45 Cable cannot insert to RJ11 Wall mount.
Installation: For wall mounted phones, the cable is in the form of a plate hung on the standard wall mount, on which the phone hangs in turn.

Product Description

RJ11 to RJ45 TELEPHONE CABLE LEAD BY KEPLE

- Modem data extended length coiled cord is provided extralength for working in the office or at home. It is good to long-distance communication for your desk phone or office phone.

- Connect two phone devices together or connect a phone to a wall jack, standard phone connectors on both ends.

BETTER SHIELDING: Flat data patch lead cord has fully molded strain relief and better material than most of other RJ11 to RJ45 cords. 4 wire cable with two reliable rubber soft plastic material RJ11 and RJ45 connectors on each end.

Usage of RJ11 to RJ45 Cables

The main difference between these two is their actual use. RJ11 is the cable connector that using in telephone sets while RJ45 is used in networking, where you connect computers or other network elements to each other.

Difference between RJ11 and RJ45 Cables

Aside from the application, there are differences in their appearance. The first of which is in the number of cables that are accommodated in each connector. RJ45 has 8 wires inside whereas Rj11 has 4 wires. As a consequence of having to accommodate more wires, RJ45 connectors are also a little bit bigger than RJ11s.

Advantages of Design

One of the chief advantages of an RJ11 and RJ45 connector is that it is easy to plug in and remove with no specialist IT skills being required. A clip or lug on the back of the jack simply folds down when the connection is made and then sits up holding the jack firmly in place. Conversely, when an RJ11 / RJ45 jack needs to be removed all you need to do is to push the lug down and the entire connector will slide out easily.

RJ11 and RJ45

RJ45 is mostly used with ethernet cables while RJ11 in connecting telephone units.
RJ45 has 8 wires inside while Rj11 has 4 wires.
RJ45 is bigger in size than RJ11.
You cannot plug-in RJ45 cable connector into a RJ11 interface/port/slot however you can do the opposite (you should avoid doing so as it can damage the RJ45 port).

Package Includes:

Plug: 1 x RJ-11 Male to RJ-45 Male Connectors

Color: Black or White