LOCTITE 510 Anaerobic flange GASKET sealant 50 ML
LOCTITE 510 Gasketing Product- high temperature and chemical resistance. Ideal for use on rigid flanges.
LOCTITE 510 is a high temperature resistant anaerobic sealant which cures when confined in the absence of air between close-fitting metal surfaces. Typical applications include sealing rigid flange faces on transmissions and engine casings. It ensures an instant, low-pressure seal. The product increases the torque capacity of assembled flanges.
LOCTITE 515 Anaerobic flange GASKET sealant 50 ML
LOCTITE 515 for machined, rigid metal flanges - medium cure speed
Technical Data
Colour: Dark purple Service temperature range: -55°C - +150°C Tensile shear strength: 6N/mm² Max. gap: 0.25mm Fixture time steel: 30 min. Fixture time aluminium: 30 min. Strength: Medium Cure method: Anaerobic Pack sizes: 50ml, 300ml LOCTITE 515 LOCTITE 515 for machined, rigid metal flanges - medium cure speed Technical Data ---Colour: Dark purple ---Service temperature range: -55°C - +150°C ---Tensile shear strength: 6N/mm² ---Max. gap: 0.25mm ---Fixture time steel: 30 min. ---Fixture time aluminium: 30 min. ---Strength: Medium ---Cure method: Anaerobic
LOCTITE 518 Gasketing Product - excellent oil resistance. 50 ML
LOCTITE 518 Gasketing Product - excellent oil resistance. Ideal for use on rigid iron, steel and aluminium flanges.
LOCTITE 518 is a medium-strength sealant which cures when confined in the absence of air between close-fitting metal surfaces. Typical applications include sealing close-fitting joints between rigid metal faces and flanges. Provides resistance to low pressures immediately after assembly of flanges. Typically used as a form-in-place gasket on rigid flanged connections, e.g. transmissions and engine casings.
Your benefits
Medium-strength anaerobic flange gasket
For metal flanges
Adapts to flange surface irregularities and scratches up to 0.25 mm
Gel-type consistency
Ideal for overhead application and vertical faces (no dripping)
Seals instantly against low pressure
P1 NSF Reg. No.: 123758
Technical Data
Colour: Red
Max. gap size: 0,3 mm
Service temperature range: -55 to +150°C
Tensile shear strength in N / mm²: 7,5
Substrate to be sealed: Metals
Fixture time steel: 25 min.
Fixture time aluminium: 20 min. LOCTITE 518 Gasketing Product - excellent oil resistance. Ideal for use on rigid iron, steel and aluminium flanges. LOCTITE 518 is a medium-strength sealant which cures when confined in the absence of air between close-fitting metal surfaces. Typical applications include sealing close-fitting joints between rigid metal faces and flanges. Provides resistance to low pressures immediately after assembly of flanges. Typically used as a form-in-place gasket on rigid flanged connections, e.g. transmissions and engine casings. Your benefits Medium-strength anaerobic flange gasket For metal flanges Adapts to flange surface irregularities and scratches up to 0.25 mm Gel-type consistency Ideal for overhead application and vertical faces (no dripping) Seals instantly against low pressure P1 NSF Reg. No.: 123758 Technical Data Colour: Red Max. gap size: 0,3 mm Service temperature range: -55 to +150°C Tensile shear strength in N / mm²: 7,5 Substrate to be sealed: Metals Fixture time steel: 25 min. Fixture time aluminium: 20 min.
LOCTITE 542 THREAD SEALANT MEDIUM STRENGTH 50 ML
LOCTITE 542 50ml thread Sealant - medium strength. For fine threads in hydraulic, pneumatic and general fittings. Fast curing.
LOCTITE 542 is designed for the locking and sealing of metal pipes and fittings as well as other cylindrical metal assemblies. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. The thixotropic nature of LOCTITE 542 reduces the migration of liquid product after application to the part.
Your benefits
Ideal for fine threads as used in hydraulic, pneumatic & general fittings
Suitable for metal threads only
Instant low-pressure seal
Resistant to fuel, oil, coolants and hydraulic fluids
Locks connection against vibration loosening
Loctite 545 50ml High lubricity thread sealant for locking and sealing metal pipes and small fittings with fine threads. LOCTITE® 545 is a pipe thread sealant designed for locking and sealing of metal pipes and fittings. It is specially formulated to offer high lubricity for easy assembly and removal. Recommended for fine threaded fittings as used in hydraulic and pneumatic installations and small fittings in general. Suitable for fittings up to 50 mm in diameter including pneumatic and hydraulic fittings. Excellent solvent resistance ABSSM approved CFIA approved Contains no fillers or particles that could contaminate system fluids, foul valves, or clog fine filters and screens
LOCTITE® 554 is a red, methacrylate ester acrylic thread sealant liquid which provides maximum solvent resistance on threaded fittings and pipes up to 2 in (50 mm) in diameter. The sealant is used in place of specialty non-hardening compounds, litharge, glycerin and sealing tape. It is suited to temperatures up to +300.2 °F (+149 °C).
Provides maximum solvent resistance on threaded fittings and pipes up to 2 in (50 mm) in diameter
Typical applications include metal and fiber plants, chemical processing, paper processing plants, waste treatment facilities and textile industries
Recommended for refrigeration systems and service with strong chemicals
LOCTITE 565 50ML Low Strength PST THREAD Sealant
LOCTITE 565 PST PIPE SEALANT
LOW STRENGTH
LOCTITE 567 HIGH STRENGTH THREAD SEALANT 50 ML Off-white, low disassembly strength methacrylate thread sealant, ideal for sealing coarse threads up to M80/R3". UL approved. LOCTITE® 567 is an off-white, low strength, thixotropic methacrylate thread sealant. It cures in the absence of air and by contact with metals when confined within threads up to M80/R3". It is best suited for use on coarse metal threads and its breakaway torque rating is 1.7Nm. Viscosity is 280,000 - 800,000 mPa·s and service temperature -55 to +150ºC. UL approved. Provides an instant low pressure seal Doesn't creep, shrink or block systems Single component - clean and easy to apply Thixotropic and high/very high viscosity UL approved Off-white, low disassembly strength methacrylate thread sealant, ideal for sealing coarse threads up to M80/R3”. UL approved. LOCTITE ® 567 is an off-white, low strength, thixotropic methacrylate thread sealant.
LOCTITE 569 Methacrylate ester acrylic liquid THREAD SEALANT 50 ML Methacrylate ester acrylic liquid thread sealant designed for the locking and sealing of metal pipes and fittings. LOCTITE® 569 is a brown methacrylate ester acrylic liquid thread sealant designed for the locking and sealing of metal pipes and fittings. The product cures to prevent loosening and leakage from shock and vibration. Approved by the Australian Gas Association Certificate number 3375 Class III rated working pressure 2000 KPa, working temperature -14 °F to +302 °F(-10 °C to +150 °C). High strength Prevents loosening and leakage from shock and vibration Approved by the Australian Gas Association Certificate number 3375 Class III rated working pressure 2000 KPa, working temperature -14 °F to +302 °F(-10 °C to +150 °C) (Note: This is a regional approval) Methacrylate ester acrylic liquid thread sealant designed for the locking and sealing of metal pipes and fittings. LOCTITE® 569 is a brown methacrylate ester acrylic liquid thread sealant designed for the locking and sealing of metal pipes and fittings
LOCTITE 572 50ML
Medium strength thread sealant for coarse threads on metal pipes and fittings. Slow curing to allow adjustment after sealant application.
LOCTITE® 572 is a white to off-white, medium strength, methacrylate-based thread sealant for metal pipes and fittings. Suitable for coarse threads, it offers a breakaway torque of 7 Nm. Slow curing attributes allow users to adjust the alignment of fittings. Suitable for thread sizes up to M80, it is thixotropic to reduce migration after application.
Slow curing to allow fittings adjustment
Designed for metal pipes and fittings
Suitable for coarse threads
Medium strength
LOCTITE 574 Gasketing Product - general purpose. 50ML Flange Sealant LOCTITE 574 asketing Product - general purpose. Ideal for use on machined and rigid metal flanges
LOCTITE 574 seals close-fitting joints between rigid metal faces and flanges. The product cures when confined in the absence of air between close-fitting metal surfaces. It provides resistance to low pressures immediately after assembly. Typically used as a form-in-place gasket on rigid flanged connections. The nature of LOCTITE 574 reduces the migration of liquid product after application to the substrate. It has a high oil tolerance and excellent water and glycol resistance.
LOCTITE 577 Medium-strength, general purpose thread sealant for straight/straight and straight/taper threads and fittings. Fills the space between threaded parts and seals and locks at the same time.
LOCTITE 577 is designed for the locking and sealing of metal pipes and fittings as well as other threaded assemblies. The product provides an instant, low-pressure seal for metal pipes and fittings. It will not creep, shrink or shred. It has excellent chemical and thermal resistance and offers less migration of liquid product after application. NEW: Henkel has recently improved the product formulation of LOCTITE 577 providing:
Higher strength on contaminated surfaces Improved thermal performance High performance on passive metals without an activator
Loctite 586 Thread Sealant - high strength. Especially suitable for copper and brass fittings. Slow curing.
LOCTITE® 586 is a high-strength sealant for the locking and sealing of metal pipes and fittings as well as other cylindrical metal assemblies. The product cures slowly and provide a high-pressure seal for metal pipes and fittings. It exhibits excellent characteristics on brass and is also suitable for copper. It will not creep, shrink or block systems by shredding.
High-strength sealant for the locking and sealing of metal pipes and fittings
Slow cure time
Provides high-pressure seal
Especially suitable for copper and brass fittings
Locks connection against vibration loosening
Loctite 592 50ml Thick acrylic dimethacrylate ester lubricating thread sealant paste which prevents galling on pipe threads and fittings.
LOCTITE® 592 is an opaque, off-white, thick acrylic dimethacrylate ester lubricating thread sealant paste which prevents galling on pipe threads and fittings. It provides immediate low pressure sealing and allows the readjustment of fittings shortly after assembly. The joint seals against pipe burst pressure after 72 hours. Suits applications up to +399 °F (+204 °C). Unsuitable for plastic piping.
Prevents galling on pipe threads and fittings
High viscosity
Provides immediate low pressure sealing and allows the readjustment of fittings shortly after assembly
Anaerobic cure