Intended Use Working together with X-ray equipment, the Product is intended to make X-ray radiography
Technical Parameters Operation mode:Continuous Temperature Range:Operation (+10℃~+40℃) Transportation and storage(-20℃~+55℃) Humidity Range:Operation (≤80%(No condensation)) Transportation and storage(≤93%(No condensation)) Atmospheric Pressure Range:Operation (700hPa~1060hPa) Transportation and storage(-700hPa~1060hPa) Operation voltage: DC 5V±10% Input power:500mW Spatial Resolution:≥7Lp/mm Low contrast resolution:Able to display holes with 1mm, 1.5mm, 2mm and 2.5mm diameter on the 0.5mm-thick aluminium foil Image uniformity:≤2% Effective image area:20.16*20.16mm Ghost and artifact:NO Weight:0.1KG Size:26.5mm×32mm×11.7mm(Sensor) 60mm×40mm×29.2mm(Adaptor)
Functions of Components 1 Digital sensor The Digital sensor is the key component for imaging. It converts the X-ray signals into electrical signals that will be transmitted to the acquisition workstation. The sensor is connected to the workstation via the USB 2.0 connection. Before connecting the sensor, do not start the acquisition workstation software. Do not disconnect the sensor during the image acquisition process, otherwise the sensor can be damaged.
2 USB Connection Cable The USB cable is used to connect the sensor and the acquisition workstation. Before starting image acquisition, make sure that the USB cable is well-connected on both ends.
3 Workstation Software The workstation software receives the data from the sensor, post-processes the received data, and generates images to provide information for the diagnosis.
4 Adaptor The adaptor provides power supply for the sensor and it also transmits data from the sensor to the workstation.To ensure the safety of testing subject and the performance of the product, there are some other standard accessories packaged together with the above mentioned components, including a box of protective sheaths, a silicon loop and a sensor holder.
5 Protective Sheath Before putting the Digital sensor into the testing subject’s mouth for positioning, enclose it with a disposable protective sheath. Every testing subject should use a new sheath to prevent cross-contamination.
6 Silicon Loop Enclose the sensor with the silicon loop before putting it to the sensor holder. The case is intended to minimize the damage from shaking or falls.
7 Sensor Holder The holder is designed to provide a safe and secure storage solution for the sensor.
Sensor Storage It is strongly recommended that the sensor should be put into the package box or onto the sensor holder after each day of use, to prevent it from falling down or getting dirty. Computer Data Protection Make a copy of the data for storage every day. Copy the data to some large storage capacity medium for alternative use(copy to portable hard drives or PACS)or ask the computer provider for advice, and store the data in a safe place.
Accessory List Digital sensor*1 USB cable*1 Workstation software*1 Disposable protective sheath*1 (500PCS) silicon loop*1 Sensor holder*1
FDA Statement
The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, you can bid on this item only if you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item.
NOTE: Due to manufacturer's packaging update, the actual product packaging may differ from the picture, we try to ensure that the product is the same as the picture as much as possible. The products are the same in use and function, please refer to the actual product received.If you mind these,pls don't place an order,thank you for your assistance!