4set 31 mm Long Shaft Quartz Clock Movement Mechanism DIY Clock Repair Kit Clock
Good clock replacement: good quartz movement will work well. Simple , easy to use.
Energy efficient. Accurate timing.
Great for repairing, replacing or making a clock.
Wide application: You are enable to use it to repair, replace or make a home clock; Applicable to -, three-dimensional embroidery, craft home clock, frame-less draw clock, clockwork, etc. Perfect DIY clock kit, , and specially suitable for DIY quartz wall clock replacement movement parts, etc.
Long spindle clock: good handwork DIY clock replacement movement parts with metal hook, which meet your installation needs
Type:Long Shaft Clock Movements
Size:Total shaft length 31mm, Thread length 24mm, Jump second movement, suitable for 16 - 21 mm thickness clock panel
Type: Increase torque by jumping seconds
Rated voltage: 1.5V
Battery life (specification): . 12 Months (UM-3)
Use Battery: .5V AA Carbon battery (not included)
Instruction:
1. Attach the clockwork to the product to be installed.
2, is installed in accordance with the standard 12 points,when you install it, please keep the hour hand and minute hand parallel
3. Pull out the positioning pin from behind the clockwork and insert the battery.
(Do not insert the battery and then pull out the locking pin.)
Material:Plastic + Aluminum
colour:Black
Package contents:
4 x Quartz clock movement
4 x Second
4 x Minute hand
4 x Hour hand
4 x Plastic washer
4 x Brass washer
4 x Brass nut
4 hook
Energy efficient. Accurate timing.
Great for repairing, replacing or making a clock.
Wide application: You are enable to use it to repair, replace or make a home clock; Applicable to -, three-dimensional embroidery, craft home clock, frame-less draw clock, clockwork, etc. Perfect DIY clock kit, , and specially suitable for DIY quartz wall clock replacement movement parts, etc.
Long spindle clock: good handwork DIY clock replacement movement parts with metal hook, which meet your installation needs
Type:Long Shaft Clock Movements
Size:Total shaft length 31mm, Thread length 24mm, Jump second movement, suitable for 16 - 21 mm thickness clock panel
Type: Increase torque by jumping seconds
Rated voltage: 1.5V
Battery life (specification): . 12 Months (UM-3)
Use Battery: .5V AA Carbon battery (not included)
Instruction:
1. Attach the clockwork to the product to be installed.
2, is installed in accordance with the standard 12 points,when you install it, please keep the hour hand and minute hand parallel
3. Pull out the positioning pin from behind the clockwork and insert the battery.
(Do not insert the battery and then pull out the locking pin.)
Material:Plastic + Aluminum
colour:Black
Package contents:
4 x Quartz clock movement
4 x Second
4 x Minute hand
4 x Hour hand
4 x Plastic washer
4 x Brass washer
4 x Brass nut
4 hook
