Specifications:

--Plug Type: 9005 + H11 + 5202 High Low Beam + Foglight

--Power(per set): 100W@high beam, 100W@ low beam

--Lamp beads: CSP lamp beads

--LED Quantity: 6pcs

--Luminous Flux: 10000lm/set(5000lm/bulb)

--Operating Voltage: DC 9-32V(fit 12V,24V vehicles)

--Color Temperature: 6000K Pure White

--IP67 rated water and dust seal,over 50000hrs lifetime

--Beam Angle: 270 degree@low beam,360 degree@high beam

--Material: Aviation 6063 aluminum profile

--Operating Temperature: -40-80 degree Celsius

--Usage: Headlight + Foglight

Feature:

--(6pcs/set)9005+H11+5202 High Low Beam LED headlight conversion kit

--Engineering beam pattern design throw more light on road evenly at appropriate angle without foggy light

--Xenon white light reflect road paint/signs better to show clearer road situation during night driving

--270 degree low beam angle with cut-off line,will not dazzle oncoming traffic

--Built-in constant current CPU, instant full brightness without start-up relay

--It can directly replace the traditional tungsten bulb of the original car;

--The LED has high luminous purity, no need for lampshade filtering, and the light wavelength error is within 5 nanometers

--There is no delay when the LED lights up, while the traditional tungsten bulb has a delay of 0.3 seconds.

--LED has low power consumption. When it reaches the same brightness of traditional bulbs, it consumes only 6% of traditional bulbs, and it also saves electricity and fuel!

--It has a long life, its filament-free structure does not generate heat, and it can be used for more than 6 years under normal conditions

--LED car lights can make the vehicle control circuit not easy to oxidize, with a maximum load current of 0.1A.

--All-in-one aluminum profile as heat conduction system, 360 degree heat radiating

--No need to modify the circuit, directly replace the original traditional glass bulb, pay attention to the high temperature of the original bulb to prevent burns!

--When installing, refer to the product dimensions and pay attention to the size of the installation location. Carefully press and do not squeeze the LED chip to avoid damage. The LED has positive and negative polarity, if it is not bright, turn the direction and reinstall;

Package Include:

2 pcs 9005 High power LED Headlight High Beam Bulbs

2 pcs H11 High power LED Headlight Low Beam Bulbs

2 pcs 5202/H16 High power LED Fog Light bulbs

The old and new boxes will be sent randomly

Install Caution:

1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.

2. Put the vehicle into park or make sure it is securely in gear.

3. Be sure to turn off the ignition and remove the key.

4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.

5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.

6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.

7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.

NOTE:

Compatible list can not show up all car model，it is only for reference. It may exist someting error for some car model because of the car upgradtion and car modification.So please make 100% sure before you purchase.Otherwise, we are not responsibe for this, thanks for your cooperations!