underfloor heating loose wire cable kits to warmup under tile floors 100w/sqm
Under Tile Floor Heating Cable Kit with Wi-Fi Thermostat in 3 Colours
Google / Alexa Compatible Wi-Fi Thermostat Choice 3 colour options - Use thermostat with the Smart Life APP.
This Living Heat underfloor heating loose wire cable kit is designed to warm up all tile and stone floors. It comes complete with high-adhesion fixing tape, fitting instructions, thermostat options and a lifetime warranty.
This heating cable is ultra-thin at only 3mm, double insulated and fully earthed. Designed for use directly under tiles, this floor heating is ideal to warm up wet room floors, bathrooms and kitchens or any other room in your house.
Our Loose wire heating systems are made to set cable lengths. The floor coverage for each wire can be increased or decreased slightly by altering the spacing between cable runs giving maximum versatility.
It is important to select the correct size and type of underfloor heating system for your project so if you have any questions or require help please just give us a call. Our time and advice are Free.
Use the Smart Life App to program and use your Wi5 Wi-Fi Thermostat providing full remote control of your heating.
You may also require
Included
| PRODUCT COMES WITH |
|---|
| Floor probe (When Ordered with thermostat) |
| Fixing Tape |
| Fitting Instructions |
Installation
To work out what size kit you require please follow the next 3 steps.
1. Measure the total floor area that you wish to be heated less any immovable objects such as a bath or kitchen unit that you do not want the heating to be fitted under.
2. Take off a 10cm border around the floor area to be heated as the heating elements should not be run up tight against any walls.
3. This measurement should then be rounded down to the nearest 0.5m, (i.e. 5.27m 2 floor size would be rounded down to a 5m 2 kit size). The measurement can be rounded down to the nearest 1m on a larger room areas.
Things to know about this product
- Comes with Wi-Fi Thermostat available in 3 Colours
- Advanced High Temperature Teflon Fluoropolymer insulation
- Ultra-thin yet Ultra tough armour braided heating cable
- Easy fit the dual-core heating cable. Only one end of the cable needs to be wired into the thermostat
- Maximum flexibility, the cable can be laid in any direction in any shaped area with ease
- Heating Cable Power Rating: 100 Watts / m2
Technical Information
All Living Heat underfloor Heating is supplied with Full Installation & Fitting Instructions with Free Technical Helpline Backup.
- Loose Wire Heating System
- Dual Core Heating System
- Double insulated and fully earthed cable
- Ultra-thin armour braided heating cable
- 100w/m 2 at 120mm cable spacing's
- Life Time Warranty
- Technical Helpline for before, during and after installation
Our range of thermostats fit into a standard 1 gang back box. And can carry a maximum load of 16amps. After this threshold is passed a simple contact or relay switch must be installed.
Wi5 Wi-Fi Thermostat - WHITE
- Touch Buttons
- Alexa & Google Enabled
- Full Wi-Fi Phone Control
- Low brightness backlit for nighttime bedroom use
- Auto / Manual
- 6 Events per day
- Frost protection
- Temperature Override
- Fits standard 1G electrical wall box
- 1 Year manufacturer's warranty
Option 1
Wi5 Wi-Fi Thermostat - SILVER
- Touch Buttons
- Alexa & Google Enabled
- Full Wi-Fi Phone Control
- Low brightness backlit for nighttime bedroom use
- Auto / Manual
- 6 Events per day
- Frost protection
- Temperature Override
- Fits standard 1G electrical wall box
- 1 Year manufacturer's warranty
Option 2
Wi5 Wi-Fi Thermostat - BLACK
- Touch Buttons
- Alexa & Google Enabled
- Full Wi-Fi Phone Control
- Low brightness backlit for nighttime bedroom use
- Auto / Manual
- 6 Events per day
- Frost protection
- Temperature Override
- Fits standard 1G electrical wall box
- 1 Year manufacturer's warranty
Option 3
Fitting Guide
1. Make sure the floor area is level, clean and free of any dust or debris. If laying tiles the floor should be made suitable for laying tiles before the heating or insulation boards (if required) are laid.
2. To fit the heating cable the heated floor area must be first marked out with clear markings at even centres at opposite ends of the room / heated area, (the distance between markings will depend upon the wattage required per sqm and length of cable to be laid). To mark the floor the installer should first work out what wattage per sqm is required and thus what length or wattage cable is required. The floor should then be marked to show the desired spacing between cable runs to achieve the desired wattage per sqm over the floor area.
3. Starting from the closest point to the thermostat/power source run the cable back and forward between the floor markings taping over the cable at the start and end of each run to fix it in place so the tiling process can be completed. If the required additional tape can be used. Or the full length of the cable can be taped over to maintain even spacing and fix the cable in place. Underfloor heating mat layout.
4. Depending upon whether you are using a Living Heat dual or single-core system the other end of the cable may need to be returned to the starting position. (Living Heat duel core systems do not require the 2nd end of the cable to be returned to the start point).
Typical in screed floor layout for kitchen type area
