What everyone has been asking for, a Vitara piston connecting rod solution for the common and popular JDM D15B engines. Introducing the P2P0 custom length Vitara piston connecting rods for the JDM D15B engines (48mm rod journals).
These I-Beam connecting rods were designed and custom made to maintain proper deck height with the popular Vitara pistons. This allows for higher compression and which reduces spool time and increases efficiency. Best part is that these rods require minimal to no block notching.
Paired with our P2P0 spec YCP Vitara pistons with friction reducing Teflon™ coating. This combination should have no issues holding 500WHP+ when properly tuned.
P2P0 JDM D15B Vitara Spec Connecting Rods
- Center to center: 5.370” (136.4mm)
- Big End Diameter: 48mm
- Connecting Rod Material: Forged 4340 Steel
- Compression Ratio D15B: ~8.5:1
- Connecting Rod Finish: Shot-peened
- Weight matched: +/- 1 gram
- Wrist Pin: Floating 19mm
- Connecting Rod Bolt Diameter: 3/8”
- Connecting Rod Bolt Brand: ARP 2000
- Connecting Rod Bolt Tensile Strength (psi): 220,000
- Block Notching Required
Includes
- Connecting rods (4)
- 3/8” ARP 2000 rods bolts (8)
- 1 Packet ARP Assembly lube
The P2P0 Spec custom YCP turbo Vitara pistons made for all D16 applications. The P2P0 Spec YCP Vitara pistons are custom made with friction reducing Teflon™ skirt coating. YCP Vitaras are proven to set high HP records. Others may claim they have a superior piston but YCP has been proven time and again.
P2P0 Spec YCP 75.5mm Vitara Pistons with Hastings Rings
- Vitara Spec Bore: 75.5mm (0.5mm Oversized)
- Coating: Teflon™ Skirt Coating
- Piston Material: High strength AC8A grade casting
- Piston Heat Treatment: T6 Stress Relieving
- Wrist Pin: Floating 19mm
- Wrist Pin Material: 9310 Case Hardened
- Wrist Pin Retention: C Clip
- Dual Wrist Pin Oiling Holes
- Piston Ring Material: N-51 Gas Nitride treated
- Dish Volume: -15.00cc
- Compression Height 28.30mm
Includes
- Vitara Piston (4)
- Hastings Ring Sets (4)
- C Clips (8)
- Wrist Pins (4)
|