Audio cable for Honda Civic and CRV made after 2006, allowing use of the original buttons when fitting a Chinese aftermarket car radio stereo upgrade. Provides power and speaker connections from the car.

This plug and play cable allows you to connect a Chinese aftermarket car radio with European ISO connectors to the cars wiring using the original connectors in the car.

This cable will retain the use of the steering wheel controls when fitting an aftermarket head-units with resistive programmable steering controls (KEY1, KEY2 or SWC1, SWC2) and 3.5mm jack.

Compatible with following vehicles:

CAR MAKE / MODEL	YEAR	REMARKS
Honda Civic	2006 - 2011	8th gen
Honda CR-V	2007 - 2011	3rd Gen

Fits most Honda Civic and CRV models

This kit is only suitable for aftermarket head-units with resistive programmable steering controls (KEY1, KEY2 or SWC1, SWC2) and 3.5mm jack.

Is my aftermarket head unit resistive resistive programming?

Many Unbranded, Chinese and other aftermarket head units have the capability of being able to retain the vehicles original steering wheel control features via resistive programming. Our resistive programming steering wheel control harnesses eradicate the need for a separate steering wheel control interface when fitting an aftermarket head unit with resistive programming features.
To identify whether the aftermarket head unit you are fitting has resistive programming visit the manufacturers website and look under the connectivity features for the head unit. Some manufacturers describe it differently to others. For e.g.: Kenwood describe the DMX5020DABS model as having "Programmable OEM Steering wheel Remote Function"

What's Included

• 20-168H-SWC Steering Control Adaptor
• Stereo Patch Lead

Works with the following brands

• Alpine
• Clarion
• JVC
• Kenwood
• Pioneer
• Sony
• China Units

Patch lead INCLUDED  for the steering controls depending on the make of radio being fitted.

Technical Note

• CAR AUDIO FITTING ACCESSORIES ARE SOLD WITH LIMITED INSTRUCTIONS. 
• SOME KNOWLEDGE OF CAR AUDIO INSTALLATION IS HELPFUL IN CASE A MODIFICATION IN SOME RARE CASES MAY BE NECESSARY OR NEEDED.

IMPORTANT NOTE: Please make sure that is the correct Stalk Adaptor for your car by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture listed is the same as you have in your vehicle.

If the connection in the car is different from what you see in the picture then this adaptor is NOT suitable.