Description
package1:1. Tool Kit
2. Aluminum
3. Gold suction device
4.9 Head percussion bar
5. Red plastic 12-size mat
6. Rubber hammer
7. Blue plastic 18-size mat
8. Hot glue gun, European regulation
9 . 5 black glue sticks and 5 yellow glue sticks
10. Instructions
11. Glue removal shovel
12. Empty bottle
13. Towels
package2:1. Tool Kit
2. Gold suction device
3. Red plastic 12-size mat
4. Blue plastic 18-size mat
5. Blue mat Plastic 5-size mat
6. Hot glue gun, European regulation
7. 5 black glue sticks and 5 yellow glue sticks
8. Instructions
9. Glue removal shovel
10. Empty bottle
11. Towels
package3:1. Gold suction device
2. Blue plastic 18-size mat
3. Blue mat Plastic 5-size mat
4nstructions
5. Glue removal shovel
6.Towels
package4：1Rubber hammer
2.9 Head percussion bar
package5：1Aluminum frame bridge
package61. Tool Kit
2. Gold suction device
3. Red plastic 12-size mat
4. Blue plastic 18-size mat
5. Blue mat Plastic 5-size mat
6. Hot glue gun, regulation
7. 5 black glue sticks and 5 yellow glue sticks
8. Instructions
9. Glue removal shovel
10. Empty bottle
11. Towels
package7:1. Tool Kit
2. Aluminum bridge
3. Gold suction device
4.9 Head percussion bar
5. Red plastic 12-size mat
6. Rubber hammer
7. Blue plastic 18-size mat
8. Hot glue gun, US regulation
9 . 5 black glue sticks and 5 yellow glue sticks
10. Instructions
11. Glue removal shovel
12. Empty bottle
13. Towels
pay attention to:
Since
this product requires a hot-melt adhesive gun, and the power plugs of
the hot-melt adhesive gun selected by different countries are different
(European or American), please see the option pictures clearly when
placing orders (please select the ones suitable for your own country).
1. The alcohol bottle in this set is an empty bottle, alcohol-free liquid degumming water。Since alcohol is flammable and cannot be delivered, please find the alcohol around you.
how to use?
1. Dent caused by collision, scratch and impact.
2. Choose a label that matches the shape and size of the dent.
Apply hot melt glue to the center of the faucet and inside the inner and outer rings to make the glue on the faucet even and full.
3. Align the center point of the label with the center point of the dent, then quickly place the label on the dent and press gently until the space
The distance between the faucet and the indent is 1mm, then release your hand until it is fixed on the indent.
4. Fix the adjusted dent lifter in the tab, hold the handle, and lift it up evenly
How to use the tool?
1. Clean the damaged surface with a clean damp cloth;
2. Put the glue stick on the spray gun, connect the power supply, and preheat for 5-10 minutes;
3. Pull the trigger and apply a suitable drawing gasket with extrusion glue (the 4 holes of the gasket should be coated with hot melt adhesive);) (Note: the larger the drawing gasket, the greater the pulling force);
4. Immediately place the brushed gasket coated with hot melt glue in the center of the dent and keep it until it sticks (let the glue cool for about 5-8 minutes. The cooling time should be less than 10 minutes, and it should be slightly shorter in winter);
5. Align the T-shaped trimmer, press the wire drawing gasket with hot melt adhesive, and pull the slide bar back to pull up the dent;
6. After the dent is removed, use a plastic shovel to remove the glue with alcohol;
7. If the dent remains, tap lightly with a flattening hammer with a Tapdown head
8. Repeat the above steps until the dent is repaired.
