Document
Product Description
Key Features:
Honeycomb Ceremic Carrier:
The honeycomb ceramic substrate is fully reacted with sufficient catalyst for higher efficiency and green emissions.
Catalyst Coating:
The rare metals (Pt, Pd, Rh) make the conversion effect of the catalytic converter strong, bringing your vehicle's exhaust emissions up to standard emissions.
Stainless Steel Out Shell:
The heavy-duty stainless steel material is highly resistant to corrosion, enhancing vehicle performance and improving service life.
Vibration damping layer & Protective pads:
The vibration damping layer acts as sealing, insulating and securing the carriers, it also prevent damage to the carrier caused by vibration, heat distortion, etc.
Automatic Production Line:
Robot automatic production line, accurate hole alignment, perfect fit the original vehicle.
-
Standard Assembly Racks:
Professional assembly racks & fixtures, ensure a 360-degree fit and a 100% match to the original fittings.
Package Content
-
Catalytic Converter x 1
-
Related Accessories
Features & Details
-
FIVE CHECKS BEFORE REPLACING A CATALYTIC CONVERTER
1. Retrieve / repair all PCM trouble codes, check for any available TSBs or PCM re-flash updates
2. Repair all exhaust leaks
3. Make sure vehicle is in proper fuel control
4. Always check for internal coolant leaks and excessive oil consumption
5. Make sure you have the right part for the application
-
WHY A CATALYTIC CONVERTER FAILS:
Converters don’t fail on their own; failure is usually a symptom of a larger problem. This is why it is important to identify the root cause of the failure and perform the repair prior to installing a new converter. Most catalytic converter failures fall under one of three categories:
1. Overheated, melted or broken converters
2. Coated/oil-fouled substrate
3. Structural damage
-
DIRECT-FIT VS. UNIVERSAL CONVERTERS:
Universal fit catalytic converters have a customizable design with expandable bushings to adapt to connector pipes based on the repair.
They may require specialized fabrication and welding for installation. pre-bent routings hangers and flanges for OE-style direct-fit catalytic converters attach to the exhaust system for a direct-fit bolt-off, bolt-on solution.
No matter what you select, all converters must meet the emission requirements of the vehicle and cannot be chosen by size alone.
-
WHAT TO DO IF CHECK ENGINE LIGHT COMES ON? Troubleshoot an illuminated check engine light by making sure the gas and oil caps are on tight and that the oil dipstick is seated correctly. If the light remains lit, it could be triggered by a faulty oxygen sensor, failing catalytic converter, bad spark plugs, malfunctioning thermostat or bad mass air flow sensor. If the light remains on, make sure to make an appointment with your service provider as soon as possible.
-
WHAT IS THE DIFFERENCE BETWEEN EPA AND CARB CONVERTERS: EPA-compliant catalytic converters are for use on EPA or Federal emissions certified-vehicles, they cannot be sold or installed in California and Colorado and in certain circumstances in Maine and New York. In those states, you must install a CARB-compliant catalytic converter on CARB emissions certified vehicles in the states of California and Colorado, on all vehicles. CARB-compliant converters contain more catalyst material in order to converter emissions more efficiently and comply with stricter emissions reduction requirements. Check the vehicle’s emissions control information label and consult your state’s aftermarket converter regulations to select the right catalytic converter.
-
Note:
- Due to state emissions regulations, we cannot ship this item to the state of California as it is not CARB (California Air Research Board) approved for use in this state.
- Due to New York state emissions regulations, this item cannot be installed on vehicles equipped with California emissions standards in New York.
* All emissions information for a vehicle can be found on a tag under the hood. If the label is missing, you can contact a dealership with your VIN to determine which emissions system is equipped for your vehicle.
- Professional installation is highly recommended to ensure that the product can exert its maximum effect after proper installation.
- Please look at your converter before ordering and make sure this is the correct one.
Thank You
Tough Equipment & Tools, Pay Less
At Antiqua Autoparts, we envision a future where clean and efficient vehicles are the norm. Join us in this journey towards a greener, more sustainable tomorrow by exploring our eBay store today. Upgrade your vehicle's catalytic converter with us, and together, we'll drive change, one exhaust at a time.
Why Choose Antiqua Autoparts?
-
Premium Tough Quality
-
Incredibly Low Prices
-
Fast & Secure Delivery
-
30-Day Free Returns
-
24/7 Attentive Service
Catalytic Converter for For Ford E-350, For Ford E-450
Due to increased Emissions Standards, this item is NOT certified for sale In California, New York, Colorado and Maine. If your vehicle is registered in those states, please do NOT buy this part.
California Prop 65 Warning: Cancer and/or reproductive harm. Please read proposition 65 Warning.
-
OEM High Flow Design
-
Stainless Steel Structure
-
Hassle-Free Installation
-
Standard OBD IV Compliant
-
Vehicle Compatibility
Key Features
-
Honeycomb Ceremic Carrier:
The honeycomb ceramic substrate is fully reacted with sufficient catalyst for higher efficiency and green emissions.
-
Catalyst Coating:
The rare metals (Pt, Pd, Rh) make the conversion effect of the catalytic converter strong, bringing your vehicle's exhaust emissions up to standard emissions.
-
Stainless Steel Out Shell:
The heavy-duty stainless steel material is highly resistant to corrosion, enhancing vehicle performance and improving service life.
-
Vibration damping layer & Protective pads:
The vibration damping layer acts as sealing, insulating and securing the carriers, it also prevent damage to the carrier caused by vibration, heat distortion, etc.
-
Automatic Production Line:
Robot automatic production line, accurate hole alignment, perfect fit the original vehicle.
-
Standard Assembly Racks:
Professional assembly racks & fixtures, ensure a 360-degree fit and a 100% match to the original fittings.
-
Package Content
-
Catalytic Converter * 1
-
Related Accessories
Specifications
-
Fitment: For Ford E-350, For Ford E-450
-
Body Material: Stainless Steel
-
Substrate Material: Ceramic
-
Series Standard: OBD Ⅱ, Euro Ⅲ, Euro Ⅳ Compliant, Non-CARB Compliant
-
Installation: Bolt-on & Flange to Flange
-
Fitment:
Compatibility:
2005-2016 Ford E-350 Super Duty 6.8L V10/5.4L V8 2008-2016 Ford E-450 Super Duty 6.8L V10/5.4L V8
646321 Specifications |
Body Material |
Stainless Steel |
Inlet Gasket |
Yes |
Inlet Hardware |
None |
Inlet Type A |
3 Bolt Welded Flange |
O2 Sensor Ports |
1 |
Outlet Gasket |
Not Required |
Outlet Hardware |
None |
Outlet Type A |
3.00" OD Pipe |
Overall Length (IN) |
34.75 |
Substrate Material |
Ceramic |
Type |
EPA Direct-Fit |
-
Application: For Ford E-350, For Ford E-450 *Except California Vehicles
-
Product Dimensions (L x W x H): See Instructions
-
Product Weight: See Instructions
Features & Details
-
FIVE CHECKS BEFORE REPLACING A CATALYTIC CONVERTER
1. Retrieve / repair all PCM trouble codes, check for any available TSBs or PCM re-flash updates
2. Repair all exhaust leaks
3. Make sure vehicle is in proper fuel control
4. Always check for internal coolant leaks and excessive oil consumption
5. Make sure you have the right part for the application
-
WHY A CATALYTIC CONVERTER FAILS:
Converters don’t fail on their own; failure is usually a symptom of a larger problem.
This is why it is important to identify the root cause of the failure and perform the repair prior to installing a new converter.
Most catalytic converter failures fall under one of three categories:
1. Overheated, melted or broken converters
2. Coated/oil-fouled substrate
3. Structural damage
-
DIRECT-FIT VS. UNIVERSAL CONVERTERS:
-Universal fit catalytic converters have a customizable design with expandable bushings to adapt to connector pipes based on the repair.
-They may require specialized fabrication and welding for installation.
-Pre-bent routings hangers and flanges for OE-style direct-fit catalytic converters attach to the exhaust system for a direct-fit bolt-off, bolt-on solution.
-No matter what you select, all converters must meet the emission requirements of the vehicle and cannot be chosen by size alone.
-
WHAT TO DO IF CHECK ENGINE LIGHT COMES ON?
-Troubleshoot an illuminated check engine light by making sure the gas and oil caps are on tight and that the oil dipstick is seated correctly.
-If the light remains lit, it could be triggered by a faulty oxygen sensor, failing catalytic converter, bad spark plugs, malfunctioning thermostat or bad mass air flow sensor.
-If the light remains on, make sure to make an appointment with your service provider as soon as possible.
-
WHAT IS THE DIFFERENCE BETWEEN EPA AND CARB CONVERTERS:
1, EPA-compliant catalytic converters are for use on EPA or Federal emissions certified-vehicles, they cannot be sold or installed in California and Colorado and in certain circumstances in Maine and New York.
2, In those states, you must install a CARB-compliant catalytic converter on CARB emissions certified vehicles in the states of California and Colorado, on all vehicles.
3, CARB-compliant converters contain more catalyst material in order to converter emissions more efficiently and comply with stricter emissions reduction requirements.
4, Check the vehicle’s emissions control information label and consult your state’s aftermarket converter regulations to select the right catalytic converter.
-
OEM Number:
-
Fitment:
-
-
-
-
-
-
Note:
- Due to state emissions regulations, we cannot ship this item to the state of California as it is not CARB (California Air Research Board) approved for use in this state.
- Due to New York state emissions regulations, this item cannot be installed on vehicles equipped with California emissions standards in New York.
* All emissions information for a vehicle can be found on a tag under the hood. If the label is missing, you can contact a dealership with your VIN to determine which emissions system is equipped for your vehicle.
- Professional installation is highly recommended to ensure that the product can exert its maximum effect after proper installation.
- Please look at your converter before ordering and make sure this is the correct one.
|