Check Out Our Website for better PRICES and FREE SHIPPING!
👇👇👇👇👇👇👇👇
www.bigboytoys.shop
Miniature steam engine model with boiler. Made of brass and aluminum alloy, equipped with an aluminum alloy boiler with safety valves and brass cylinder and piston. The steam engine uses an external copper tube to transfer the steam to the cylinder. After adding water to the boiler. The steam is introduced into the system rotating the crankshaft, which drives the piston and the cylinder assembly to swing left and right. The cylinder swings to the position of the intake hole, and the steam in the boiler enters the cylinder and pushes the piston forward, commonly known as work.
The crankshaft connected to the top of the piston is pushed and rotated synchronously by the piston. The inertia of the flywheel brings the air hole of the cylinder away from the inlet hole of the main bracket, so that the pressure in the cylinder is lost, the piston stops moving forward and continues to rotate, and the air hole of the cylinder is brought into the main bracket. At the position of the exhaust hole, the piston rotates with the crankshaft, the piston retreats, and at the same time discharges the steam in the cylinder, and then continues to rotate, the cylinder will enter the next cycle to do work again and again.
Steam engine parameters;
Piston Material: Brass
Size: L X W X H (MM) | 182X100X185
Cylinder Material: Brass
Net weight: 1.0kg
Exhaust pipe material: brass
Total weight (with packaging): 1.2kg
Chimney Material: 6061
Aluminum alloy boiler outer diameter: 68mm
Base material: bamboo
Boiler capacity: 210ml
Main bracket material: 6061 aluminum alloy
Piston diameter: 8mm
Boiler bracket material: 6061 aluminum alloy
Piston stroke: 12mm
Boiler battery life: 40 min
Flywheel Diameter: 64mm
Boiler material: 6061 aluminum alloy