Description item
The feature of “our shop”
[100% authentic]
we sell official genuine products only.
So please purchase without worry!
[Direct delivery]
All the products are shipped directly from Japan.
[Condition]
NEW
[Item Description]
Adoption of Japan's first "all-around" ring-emitting LED light, optimal balance & all-around slim head & comfortable operability
Makita's research as of December 2022 on rechargeable impact drivers in Japan.
Dramatically improved visibility during work. Brightness is approximately 2.5 times brighter (compared to Makita's conventional 18V models), and illumination can be switched between 3 levels (high, medium, and low) *As of December 2022, based on Makita's research on rechargeable impact drivers in Japan.
Can also be used as a work light. Can also be used as a simple light in the "light mode," with a lighting time of approximately 1 hour.
New trigger switch. Intuitive trigger speed change operation from low to high speed range.
Grip close to the center of the shaft. The hand gripping the trigger is close to the head, making it easy to press the center of the shaft, reducing cam-out.
Rearward offset of the battery. Optimized center of gravity for balanced tightening in all directions and reduced interference with obstacles.
Easy-to-read and easy-to-use operation panel with "backward" placement. The operator can operate modes and check the remaining battery capacity while holding the panel.
Industry's smallest bit runout, with double ball bearings. Newly shaped bit sleeve with ribbed edges to prevent damage to materials even when the sleeve hits them.
Tilting angle of approx. 10.5°. Excellent cornering performance reduces cam-out, making work near walls more comfortable.
The optimum mode can be selected according to the work to be performed. Mode memory function: Pressing two buttons at the same time allows you to register one frequently used mode, and the button at hand switches between the "mode used immediately before" and the "registered mode.
18V DC, slide-type Li-ion battery specification. Battery and charger sold separately
Tightening capacity: small screws M4 to M8/ordinary bolts M5 to M16/high-strength bolts M5 to M14/course threads 22 to 125 mm
Maximum tightening torque: 180 N-m
Rotation speed [rev/min]: fastest 0-3,600/strong 0-3,200/medium 0-2,100/weak 0-1,100
Rakuraku mode rotation speed [rev/min]: wood 0 to 1,800/bolt 0 to 3,600/textured thin plate 0 to 2,900/textured thick plate 0 to 3,600
Number of blows [times/minute]: Fastest 0 to 3,800 strong 0 to 3,600 medium 0 to 2,600 weak 0 to 1,100
Rakuraku mode blow rate [blows/minute]: wood 0 to 3,800/bolt 0 to 3,800/textured thin plate Stops immediately after blow start/textured thick plate 0 to 2,600
Working volume per charge (wood screw, material lauan φ4.3 x 65mm approx.): Approx. 960 pcs.
Main unit dimensions: Length 111 mm x Width 81 mm x Height 234 mm
Weight: 1.5 kg (including battery)