4CH Car DVR AHD 4G Wireless GPS Antenna Realtime Video Recorder Remote＋4 Cameras

Description:
It is an integration of "4 monitoring and recording", "million pixels digital & analog mixed car DVR" and "wireless data transmission".
This 4-channel car video recorder assists you in recording driving route, license numbers, the situation that passengers get on or off the car and what happened when you're not in the car. Adopting high grade industry standard and designed according to the various operating environment in different cars, our 4-channel car video recorder is featured with diversified recording modes, compact size, easy installation, shock & heat resistance and stable performance. A helpful companion for all car owners!

Features:
No-seam recording technology.
Compression mode. Support 4CH real-time 720P million pixels AHD input and analog standard definition camera input, or 2CH HD input + 2CH SD input.
Exclusive pre-allocate DVR special file dystem technology. Solving repeatedly wipe cause file fragmentation, solving SD card file system collapse, data loss and cannot find SD card and file garbled, ensure the integrity of the data.
Support GPS/BD/G-SENSOR.
SD card storage maximum up to 128GB.
Support IR remote control.
Special design of encryption to protect recording files.
Support wide range of voltage input from 8V to 33V.
It can be completely resist car vibration, dust and other cause data corruption.
High reliability aviation plugs. Simple and clear operation menu.

Specifications:
General
Compatible with: apply to all kinds of cars
Operating language: Chinese/English
Voltage: 8-36V DC
Power output: 12V
Working temperature: -40℃-80℃
Account: bsa3066
Password: 000000
Pixels: 130 megapixels

Video:
Video compression: H.264
Video input: 4ch
Video output: 1ch
Video standard: PAL, NTSC, CIF, HD1, D1, 720P
Video quality: 0-7 levels, 0 is the highest level, 7 is the lowest level
Resolution: 720P/D1/HD1/CIF, MAX: 4 channels of 720P
Preview: support 1 channel and 4 channels preview, support Manual/Alarm Trigger full screen preview
Record mode: auto / timed / alarm trigger / manual recording

Audio:
Audio compression: G.726 compression, 8KB/s speed
Audio input: 4CH, aviation plug
Audio output: 2CH, front port is earphone port, rear port connects to BNC connector
Output level: 1V - 2V

4 Cameras:
Resolution: 580 TVL
Lens: 2.5mm
Minimum illumination: 0Lux (LED ON)
Night Vision: Yes
Waterproof: IP67
Operating voltage: 12 / 24V DC
Operating temperature: -20 ° C ~ + 70 ° C
Built-in

(4G/LTE:FDD,2100(B1)/1900(B2); 3G/WCDMA:2100(B1)/1900(B2)850(B5); 2G/GSM:1900(B2)/850(B5))

Position: built-in GPS/BD module
G-Sensor: support
Voltage & Power Consumption
Voltage input: 8V-33V
Voltage output: 12V/2A
Power consumption: normal working<5W, stand-by status<0.5W

Others:
Product size: 14.5 * 13 * 4cm / 5.7 * 5.1 * 1.6in
Product weight: 435g / 15.3oz
Package size: 22 * 16 * 7.5cm / 8.7 * 6.3 * 3in
Package weight: 800g / 28.2oz

Note:
Please confirm that the battery voltage is between 8V-36V. If surpass the range, it would burn the equipment.

Package include:
1 x host
4 x camera
4 x camera extension cord
1 x Recorder Power cable
1 x audio output cable
1 x receiver extension cord
1 x video cable
2 x hot silica gel
2 x adhesive
1 x
2 x gate adhesive
2 x sealant
2 x key
1 x remote control
1 x manual
1 x GPS Antenna
1 x 4G Antenna

Common problem

Q:When Device issue appear,you are confused on how to solve it.

A:Check Device Item No & Firmware Version,sent back to us with detail description of issue.Our Technical Team will handle it.

More detail you described,easier for us to solve it quickly.

Q:Video Output Lost

A:1.Check situation of DVR:Device Input Power;Power Cable Connection;GND Connect to battery;fuse;RED & Yellow Cable of Power must connect together;

2.Check the Screen Power or Check if the Screen change to related AV Channel;

3.Check the connection of Video Output & Screen Cable;

Q:Device keep Rebooting

A:1)Check working power,if low power device will keep rebooting;

2)HDD/SD Card error, remove storage device and turn on device checking;

Q: If the video input interface of the device and camera is different.

A:The DVR is using 4 needle type port, the camera is BNC port or Aviation, if it is different, please use the X-over to connect, or connect according to the DVR Line sequence definition

Q:Device on with HDD but not recording;

A:1)Check SD/HDD if format;if not please enter Main GUI--System Set--Format,format HDD/SD Card;

2)If close Recording ,or set Timed Recording mode, if yes it won’t recording if not the time set

3)If the HDD is connect well, if the HDD/SD light is on.

Q: Video files lost, or there is no video files at a certain period time.

A: 1. Analysis the lost video and ensure the lost time period.

2.Confirm if the DVR was opened at that time, such as crashed midway park, loading and unloading ect. And the device didn’t set the delay recording

Q: Can not control the Car PTZ, can not rotate to all direction.

A: If the agreement and Baud rate of the PTZ is setting right,if the address code is corresponding, if the video channel is setting to max when control the PTZ. Like if is control the first channel, then must set the first channel image to be max.

2.GPS related FAQ

Q: With GPS but no GPS coordinate Information

A:1)Check if GPS module exist;

2)Check GPS Antenna connection,suggest install on the outside place with strong signal;

3)If testing in office, suggest put GPS Antenna out of window;

4)If working environment not good will related to no GPS Information or wrong information;

Q:Deviation of GPS Location on Map?

A:The signal is effective if the GPS module has been positioning, there are so many reasons caused bias, government restriction, permissible error, GPS signal break off, The actual satellite map error occurred for the security, GPS Correction can solve the problem.

4G Wireless Module related FAQ

Q:If using 4G ,what should we concern?

A:1)Choose inside wireless module , relative module setting is different then SIM Card is different, please make sure the module is corresponding with the SIM Card.

2)If Server IP & Port set correct,if 4G signal strong for dialing;4G dialing successfully or not;

3)Check 4G Antenna connection,dialing will be failed if 4G signal too weak;

4)Check SIM Card 4G Flow

Q:When meet device offline or no video,what should be done first?

A:1)Press INFO key to enter the system Info page,check if SIM Card exist,4G signal and dialing status,Antenna connection,Check SIM Card 4G Flow,change to a new SIM Card check again;

2)4G Signal strong but dialing fail,check if center IP & Port set correct;

3)Check if Device ID already be occupied;

Q:4G Signal is intermittent, video get stuck ?

A:At present, signal coverage of the WCDMA and EVDO is very wide, but still there are some mountain area signal is weak, this will influence. Then check if the frame rate in Sub-stream setting is too high.

Client Software FAQ

Q:Device working but can not see Vehicle and video on client software

A: 1)Check if Center Server running and device Number if using;

2)Check Server IP and Port parameter setting;

3)Check is using 4G for connecting, if 4G check the 4G Model and related SIM card,4G antenna connect normally/APN setting/Center No. setting;

If it still can not work,please offer the most detailed information to us for technical support

Q:Device Online but can not see video

A:1)Please set Low Sub-stream,when sub-stream set high it will effect the transmission because of the network;

2)Network environment not good;

Q: Device works well in the Client, but cannot see the video a period time later.

A:1.Check if connect to server successfully on device, if dialing probably SIM Card no 4G Flow,change another SIM card for testing;

2.Check if Device Number be changed,if yes,need add device to server again;

3.If still can not view video after previous 2 steps,please check if 4G module error;

Other related questions

Q: Video Lost in certain channel?

A: Possible reasons are as follows

1. This channel has no video input

2.The camera of this channel breaks down or work abnormality

3.If the camera takes an electricity power from the equipment directly, may be the

equipment’s electric voltage isn't enough to make camera work as usual;

d) The cable that links this channel has problem

Q: Can’t playback files on PC successfully?

A: Possible reason is as follows:

1.Have never chosen a record file or document path; please choose the path that records file first before playback.

Q: Remote control not works?

A: Probably of the reasons are as follows:

1.The remote control didn't pack battery;

2.2.The remote control damages;

3.Device damages.

Q: During playback, the map doesn't show?

A: Possible reasons are as follows: Net cable did not connect to PC; Net works, but the computer can not get to the Internet;

Q: When SD card and HDD records, How is the record coverage?

A: SD card and HDD will record circularly for each other. When they are full, they will delete the original video records respectively.