Description
New JYR-4010 Four Band High Power Shortwave End Fed Antenna with Air Convection Cooling Shell for 10/15/20/40 Meter Wave
Description:
- Air convection cooling of the shell can effectively improve heat dissipation efficiency and make the antenna work stably for a longer time.
- This high-power end feed antenna is made of a world renowned factory magnetic ring with two superimposed outer diameters of (310) 79mm, which is larger than the (290) 73mm in the United States. It can withstand SSB: 1200W, FT8<500W, CW<800W for a long time, short-term peak power SSB<2000W (PEP), FT8<800W, CW<1000W. It is convenient, simple, and fast for urban and outdoor installation.
- The installation space of the JYR4010-2kw antenna must be at least 26 meters, with a distance of at least 3 meters from the antenna oscillator around it. It is recommended to install it as high as possible, and the higher it is, the better it is to stay away from high-voltage wires, and other metal objects in order to ensure the parameters and effectiveness.
- The antenna with a single end feed is called an end fed antenna. The Balun has a radiator on one side and empty on the other side. This structure of the antenna is very convenient for installation. As long as both sides are pulled with ropes, the radiator and the Balun should be at least 3 meters away from all objects. It can be pulled horizontally, vertically, or diagonally, and the Balun can be installed from top to bottom, concealed, especially suitable for rapid installation in cities and outdoors.
Precaution:
- When installing the antenna, the vertical inclination angle of the Balun should not exceed 30 degrees to ensure waterproofing.
Specification:
- Configuration: 2.5 square 20m wire, 20m rope, 1:64 Balun
- Using waveband: 10, 15, 20, 40 meter wave
- Withstand power: SSB < 2000W (PEP), CW < 1000W, FT8 < 500W
- Gain: the 10/15/20 meter waves exceed the positive V and negative V of the induction type, while the 40 meter wave is equivalent to it.
Package Included:
- 1 x Set of End Fed Antenna
Description:
- Air convection cooling of the shell can effectively improve heat dissipation efficiency and make the antenna work stably for a longer time.
- This high-power end feed antenna is made of a world renowned factory magnetic ring with two superimposed outer diameters of (310) 79mm, which is larger than the (290) 73mm in the United States. It can withstand SSB: 1200W, FT8<500W, CW<800W for a long time, short-term peak power SSB<2000W (PEP), FT8<800W, CW<1000W. It is convenient, simple, and fast for urban and outdoor installation.
- The installation space of the JYR4010-2kw antenna must be at least 26 meters, with a distance of at least 3 meters from the antenna oscillator around it. It is recommended to install it as high as possible, and the higher it is, the better it is to stay away from high-voltage wires, and other metal objects in order to ensure the parameters and effectiveness.
- The antenna with a single end feed is called an end fed antenna. The Balun has a radiator on one side and empty on the other side. This structure of the antenna is very convenient for installation. As long as both sides are pulled with ropes, the radiator and the Balun should be at least 3 meters away from all objects. It can be pulled horizontally, vertically, or diagonally, and the Balun can be installed from top to bottom, concealed, especially suitable for rapid installation in cities and outdoors.
Precaution:
- When installing the antenna, the vertical inclination angle of the Balun should not exceed 30 degrees to ensure waterproofing.
Specification:
- Configuration: 2.5 square 20m wire, 20m rope, 1:64 Balun
- Using waveband: 10, 15, 20, 40 meter wave
- Withstand power: SSB < 2000W (PEP), CW < 1000W, FT8 < 500W
- Gain: the 10/15/20 meter waves exceed the positive V and negative V of the induction type, while the 40 meter wave is equivalent to it.
Package Included:
- 1 x Set of End Fed Antenna
Payment Terms
1. We accept PayPal,Payoneer,Visa Card,Google pay,Credit card etc.
2. We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
2. We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
Shipping Terms
1. We will process the order within the handling time ,if you have any questions, please contact us via eBay message or email.
2. For remote regions of DHL/FedEx..., extra shipping costs might be charged. Usually it costs about 30USD-50USD. We will contact you if shipping company informed us your address belongs to remote area. Thanks for your understanding.
2. For remote regions of DHL/FedEx..., extra shipping costs might be charged. Usually it costs about 30USD-50USD. We will contact you if shipping company informed us your address belongs to remote area. Thanks for your understanding.
Return Terms
If you receive the item that not satisfied or defective, please do not open case and kindly notify us within 30 days. We will guide you the returning process for replacement or refund.
Custom Duties & Taxes
1. It is buyer's responsibility to cover the import duties, taxes.We do not charge any taxes and fees, and the possible taxes and fees will be collected by the platform or by third parties such as customs and carriers.
2. Please check with your country's customs office and inform us what/how much should declare before shipping.
2. Please check with your country's customs office and inform us what/how much should declare before shipping.
Feedback
1. Please kindly leave us a positive feedback and 5 star DSR if you satisfied with our product and service. Please feel free to contact us firstly if you have any problem with your order, we are responsible and credible seller and will solve the issue it for you asap.
2. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
2. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
On Sep 27, 2023 at 02:00:58 PDT, seller added the following information: